-#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
#include <linux/interrupt.h>
-#include <linux/major.h>
-#include <linux/errno.h>
-#include <linux/genhd.h>
-#include <linux/blkpg.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/bitops.h>
-#include <asm/byteorder.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-/*
- * IDE library routines. These are plug in code that most
- * drivers can use but occasionally may be weird enough
- * to want to do their own thing with
- *
- * Add common non I/O op stuff here. Make sure it has proper
- * kernel-doc function headers or your patch will be rejected
- */
-
static const char *udma_str[] =
{ "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44",
"UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" };
mode = XFER_PIO_4;
}
-// printk("%s: mode 0x%02x, speed 0x%02x\n", __FUNCTION__, mode, speed);
+/* printk("%s: mode 0x%02x, speed 0x%02x\n", __func__, mode, speed); */
return min(speed, mode);
}
-/*
- * Standard (generic) timings for PIO modes, from ATA2 specification.
- * These timings are for access to the IDE data port register *only*.
- * Some drives may specify a mode, while also specifying a different
- * value for cycle_time (from drive identification data).
- */
-const ide_pio_timings_t ide_pio_timings[6] = {
- { 70, 165, 600 }, /* PIO Mode 0 */
- { 50, 125, 383 }, /* PIO Mode 1 */
- { 30, 100, 240 }, /* PIO Mode 2 */
- { 30, 80, 180 }, /* PIO Mode 3 with IORDY */
- { 25, 70, 120 }, /* PIO Mode 4 with IORDY */
- { 20, 50, 100 } /* PIO Mode 5 with IORDY (nonstandard) */
-};
-
-EXPORT_SYMBOL_GPL(ide_pio_timings);
-
-/*
- * Shared data/functions for determining best PIO mode for an IDE drive.
- * Most of this stuff originally lived in cmd640.c, and changes to the
- * ide_pio_blacklist[] table should be made with EXTREME CAUTION to avoid
- * breaking the fragile cmd640.c support.
- */
-
-/*
- * Black list. Some drives incorrectly report their maximal PIO mode,
- * at least in respect to CMD640. Here we keep info on some known drives.
- */
-static struct ide_pio_info {
- const char *name;
- int pio;
-} ide_pio_blacklist [] = {
-/* { "Conner Peripherals 1275MB - CFS1275A", 4 }, */
- { "Conner Peripherals 540MB - CFS540A", 3 },
-
- { "WDC AC2700", 3 },
- { "WDC AC2540", 3 },
- { "WDC AC2420", 3 },
- { "WDC AC2340", 3 },
- { "WDC AC2250", 0 },
- { "WDC AC2200", 0 },
- { "WDC AC21200", 4 },
- { "WDC AC2120", 0 },
- { "WDC AC2850", 3 },
- { "WDC AC1270", 3 },
- { "WDC AC1170", 1 },
- { "WDC AC1210", 1 },
- { "WDC AC280", 0 },
-/* { "WDC AC21000", 4 }, */
- { "WDC AC31000", 3 },
- { "WDC AC31200", 3 },
-/* { "WDC AC31600", 4 }, */
-
- { "Maxtor 7131 AT", 1 },
- { "Maxtor 7171 AT", 1 },
- { "Maxtor 7213 AT", 1 },
- { "Maxtor 7245 AT", 1 },
- { "Maxtor 7345 AT", 1 },
- { "Maxtor 7546 AT", 3 },
- { "Maxtor 7540 AV", 3 },
-
- { "SAMSUNG SHD-3121A", 1 },
- { "SAMSUNG SHD-3122A", 1 },
- { "SAMSUNG SHD-3172A", 1 },
-
-/* { "ST51080A", 4 },
- * { "ST51270A", 4 },
- * { "ST31220A", 4 },
- * { "ST31640A", 4 },
- * { "ST32140A", 4 },
- * { "ST3780A", 4 },
- */
- { "ST5660A", 3 },
- { "ST3660A", 3 },
- { "ST3630A", 3 },
- { "ST3655A", 3 },
- { "ST3391A", 3 },
- { "ST3390A", 1 },
- { "ST3600A", 1 },
- { "ST3290A", 0 },
- { "ST3144A", 0 },
- { "ST3491A", 1 }, /* reports 3, should be 1 or 2 (depending on */
- /* drive) according to Seagates FIND-ATA program */
-
- { "QUANTUM ELS127A", 0 },
- { "QUANTUM ELS170A", 0 },
- { "QUANTUM LPS240A", 0 },
- { "QUANTUM LPS210A", 3 },
- { "QUANTUM LPS270A", 3 },
- { "QUANTUM LPS365A", 3 },
- { "QUANTUM LPS540A", 3 },
- { "QUANTUM LIGHTNING 540A", 3 },
- { "QUANTUM LIGHTNING 730A", 3 },
-
- { "QUANTUM FIREBALL_540", 3 }, /* Older Quantum Fireballs don't work */
- { "QUANTUM FIREBALL_640", 3 },
- { "QUANTUM FIREBALL_1080", 3 },
- { "QUANTUM FIREBALL_1280", 3 },
- { NULL, 0 }
-};
-
-/**
- * ide_scan_pio_blacklist - check for a blacklisted drive
- * @model: Drive model string
- *
- * This routine searches the ide_pio_blacklist for an entry
- * matching the start/whole of the supplied model name.
- *
- * Returns -1 if no match found.
- * Otherwise returns the recommended PIO mode from ide_pio_blacklist[].
- */
-
-static int ide_scan_pio_blacklist (char *model)
-{
- struct ide_pio_info *p;
-
- for (p = ide_pio_blacklist; p->name != NULL; p++) {
- if (strncmp(p->name, model, strlen(p->name)) == 0)
- return p->pio;
- }
- return -1;
-}
-
-unsigned int ide_pio_cycle_time(ide_drive_t *drive, u8 pio)
-{
- struct hd_driveid *id = drive->id;
- int cycle_time = 0;
-
- if (id->field_valid & 2) {
- if (id->capability & 8)
- cycle_time = id->eide_pio_iordy;
- else
- cycle_time = id->eide_pio;
- }
-
- /* conservative "downgrade" for all pre-ATA2 drives */
- if (pio < 3) {
- if (cycle_time && cycle_time < ide_pio_timings[pio].cycle_time)
- cycle_time = 0; /* use standard timing */
- }
-
- return cycle_time ? cycle_time : ide_pio_timings[pio].cycle_time;
-}
-
-EXPORT_SYMBOL_GPL(ide_pio_cycle_time);
-
/**
* ide_get_best_pio_mode - get PIO mode from drive
* @drive: drive to consider
if (overridden)
printk(KERN_INFO "%s: tPIO > 2, assuming tPIO = 2\n",
drive->name);
-
- /*
- * Conservative "downgrade" for all pre-ATA2 drives
- */
- if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_DOWNGRADE) == 0 &&
- pio_mode && pio_mode < 4) {
- pio_mode--;
- printk(KERN_INFO "%s: applying conservative "
- "PIO \"downgrade\"\n", drive->name);
- }
}
if (pio_mode > max_mode)
void ide_set_pio(ide_drive_t *drive, u8 req_pio)
{
ide_hwif_t *hwif = drive->hwif;
+ const struct ide_port_ops *port_ops = hwif->port_ops;
u8 host_pio, pio;
- if (hwif->set_pio_mode == NULL)
+ if (port_ops == NULL || port_ops->set_pio_mode == NULL ||
+ (hwif->host_flags & IDE_HFLAG_NO_SET_MODE))
return;
BUG_ON(hwif->pio_mask == 0x00);
int ide_set_pio_mode(ide_drive_t *drive, const u8 mode)
{
ide_hwif_t *hwif = drive->hwif;
+ const struct ide_port_ops *port_ops = hwif->port_ops;
- if (hwif->set_pio_mode == NULL)
+ if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)
+ return 0;
+
+ if (port_ops == NULL || port_ops->set_pio_mode == NULL)
return -1;
/*
* TODO: temporary hack for some legacy host drivers that didn't
* set transfer mode on the device in ->set_pio_mode method...
*/
- if (hwif->set_dma_mode == NULL) {
- hwif->set_pio_mode(drive, mode - XFER_PIO_0);
+ if (port_ops->set_dma_mode == NULL) {
+ port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
return 0;
}
if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
if (ide_config_drive_speed(drive, mode))
return -1;
- hwif->set_pio_mode(drive, mode - XFER_PIO_0);
+ port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
return 0;
} else {
- hwif->set_pio_mode(drive, mode - XFER_PIO_0);
+ port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
return ide_config_drive_speed(drive, mode);
}
}
int ide_set_dma_mode(ide_drive_t *drive, const u8 mode)
{
ide_hwif_t *hwif = drive->hwif;
+ const struct ide_port_ops *port_ops = hwif->port_ops;
+
+ if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)
+ return 0;
- if (hwif->set_dma_mode == NULL)
+ if (port_ops == NULL || port_ops->set_dma_mode == NULL)
return -1;
if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
if (ide_config_drive_speed(drive, mode))
return -1;
- hwif->set_dma_mode(drive, mode);
+ port_ops->set_dma_mode(drive, mode);
return 0;
} else {
- hwif->set_dma_mode(drive, mode);
+ port_ops->set_dma_mode(drive, mode);
return ide_config_drive_speed(drive, mode);
}
}
int ide_set_xfer_rate(ide_drive_t *drive, u8 rate)
{
ide_hwif_t *hwif = drive->hwif;
+ const struct ide_port_ops *port_ops = hwif->port_ops;
- if (hwif->set_dma_mode == NULL)
+ if (port_ops == NULL || port_ops->set_dma_mode == NULL ||
+ (hwif->host_flags & IDE_HFLAG_NO_SET_MODE))
return -1;
rate = ide_rate_filter(drive, rate);
else
task.tf_flags = IDE_TFLAG_IN_LBA | IDE_TFLAG_IN_DEVICE;
- ide_tf_read(drive, &task);
+ drive->hwif->tf_read(drive, &task);
if (lba48 || (tf->device & ATA_LBA))
printk(", LBAsect=%llu",