static DEFINE_MUTEX(core_lock);
static DEFINE_IDR(i2c_adapter_idr);
-#define is_newstyle_driver(d) ((d)->probe || (d)->remove)
+#define is_newstyle_driver(d) ((d)->probe || (d)->remove || (d)->detect)
+
+static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
/* ------------------------------------------------------------------------- */
{
struct i2c_client *client = to_i2c_client(dev);
struct i2c_driver *driver = to_i2c_driver(dev->driver);
- const struct i2c_device_id *id;
int status;
- if (!driver->probe)
+ if (!driver->probe || !driver->id_table)
return -ENODEV;
client->driver = driver;
dev_dbg(dev, "probe\n");
- if (driver->id_table)
- id = i2c_match_id(driver->id_table, client);
- else
- id = NULL;
- status = driver->probe(client, id);
+ status = driver->probe(client, i2c_match_id(driver->id_table, client));
if (status)
client->driver = NULL;
return status;
{ },
};
-static struct bus_type i2c_bus_type = {
+struct bus_type i2c_bus_type = {
.name = "i2c",
.dev_attrs = i2c_dev_attrs,
.match = i2c_device_match,
.suspend = i2c_device_suspend,
.resume = i2c_device_resume,
};
+EXPORT_SYMBOL_GPL(i2c_bus_type);
/**
return;
}
+ if (adapter->client_unregister) {
+ if (adapter->client_unregister(client)) {
+ dev_warn(&client->dev,
+ "client_unregister [%s] failed\n",
+ client->name);
+ }
+ }
+
mutex_lock(&adapter->clist_lock);
list_del(&client->list);
mutex_unlock(&adapter->clist_lock);
struct i2c_driver *driver = to_i2c_driver(d);
struct i2c_adapter *adap = data;
+ /* Detect supported devices on that bus, and instantiate them */
+ i2c_detect(adap, driver);
+
+ /* Let legacy drivers scan this bus for matching devices */
if (driver->attach_adapter) {
/* We ignore the return code; if it fails, too bad */
driver->attach_adapter(adap);
if (adap->nr < __i2c_first_dynamic_bus_num)
i2c_scan_static_board_info(adap);
- /* let legacy drivers scan this bus for matching devices */
+ /* Notify drivers */
dummy = bus_for_each_drv(&i2c_bus_type, NULL, adap,
i2c_do_add_adapter);
{
struct i2c_driver *driver = to_i2c_driver(d);
struct i2c_adapter *adapter = data;
+ struct i2c_client *client, *_n;
int res;
+ /* Remove the devices we created ourselves */
+ list_for_each_entry_safe(client, _n, &driver->clients, detected) {
+ if (client->adapter == adapter) {
+ dev_dbg(&adapter->dev, "Removing %s at 0x%x\n",
+ client->name, client->addr);
+ list_del(&client->detected);
+ i2c_unregister_device(client);
+ }
+ }
+
if (!driver->detach_adapter)
return 0;
res = driver->detach_adapter(adapter);
*/
int i2c_del_adapter(struct i2c_adapter *adap)
{
- struct list_head *item, *_n;
- struct i2c_client *client;
+ struct i2c_client *client, *_n;
int res = 0;
mutex_lock(&core_lock);
/* detach any active clients. This must be done first, because
* it can fail; in which case we give up. */
- list_for_each_safe(item, _n, &adap->clients) {
+ list_for_each_entry_safe(client, _n, &adap->clients, list) {
struct i2c_driver *driver;
- client = list_entry(item, struct i2c_client, list);
driver = client->driver;
/* new style, follow standard driver model */
dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
+ /* Clear the device structure in case this adapter is ever going to be
+ added again */
+ memset(&adap->dev, 0, sizeof(adap->dev));
+
out_unlock:
mutex_unlock(&core_lock);
return res;
struct i2c_adapter *adapter = to_i2c_adapter(dev);
struct i2c_driver *driver = data;
- driver->attach_adapter(adapter);
+ i2c_detect(adapter, driver);
+
+ /* Legacy drivers scan i2c busses directly */
+ if (driver->attach_adapter)
+ driver->attach_adapter(adapter);
return 0;
}
pr_debug("i2c-core: driver [%s] registered\n", driver->driver.name);
- /* legacy drivers scan i2c busses directly */
- if (driver->attach_adapter)
- class_for_each_device(&i2c_adapter_class, driver,
- __attach_adapter);
+ INIT_LIST_HEAD(&driver->clients);
+ /* Walk the adapters that are already present */
+ class_for_each_device(&i2c_adapter_class, NULL, driver,
+ __attach_adapter);
mutex_unlock(&core_lock);
return 0;
{
struct i2c_adapter *adapter = to_i2c_adapter(dev);
struct i2c_driver *driver = data;
+ struct i2c_client *client, *_n;
+
+ list_for_each_entry_safe(client, _n, &driver->clients, detected) {
+ dev_dbg(&adapter->dev, "Removing %s at 0x%x\n",
+ client->name, client->addr);
+ list_del(&client->detected);
+ i2c_unregister_device(client);
+ }
+
+ if (is_newstyle_driver(driver))
+ return 0;
/* Have a look at each adapter, if clients of this driver are still
* attached. If so, detach them to be able to kill the driver
"detach_adapter failed for driver [%s]\n",
driver->driver.name);
} else {
- struct list_head *item, *_n;
- struct i2c_client *client;
+ struct i2c_client *client, *_n;
- list_for_each_safe(item, _n, &adapter->clients) {
- client = list_entry(item, struct i2c_client, list);
+ list_for_each_entry_safe(client, _n, &adapter->clients, list) {
if (client->driver != driver)
continue;
dev_dbg(&adapter->dev,
{
mutex_lock(&core_lock);
- /* new-style driver? */
- if (is_newstyle_driver(driver))
- goto unregister;
-
- class_for_each_device(&i2c_adapter_class, driver, __detach_adapter);
+ class_for_each_device(&i2c_adapter_class, NULL, driver,
+ __detach_adapter);
- unregister:
driver_unregister(&driver->driver);
pr_debug("i2c-core: driver [%s] unregistered\n", driver->driver.name);
*/
struct i2c_client *i2c_use_client(struct i2c_client *client)
{
- get_device(&client->dev);
- return client;
+ if (client && get_device(&client->dev))
+ return client;
+ return NULL;
}
EXPORT_SYMBOL(i2c_use_client);
*/
void i2c_release_client(struct i2c_client *client)
{
- put_device(&client->dev);
+ if (client)
+ put_device(&client->dev);
}
EXPORT_SYMBOL(i2c_release_client);
* ----------------------------------------------------
*/
+/**
+ * i2c_transfer - execute a single or combined I2C message
+ * @adap: Handle to I2C bus
+ * @msgs: One or more messages to execute before STOP is issued to
+ * terminate the operation; each message begins with a START.
+ * @num: Number of messages to be executed.
+ *
+ * Returns negative errno, else the number of messages executed.
+ *
+ * Note that there is no requirement that each message be sent to
+ * the same slave address, although that is the most common model.
+ */
int i2c_transfer(struct i2c_adapter * adap, struct i2c_msg *msgs, int num)
{
int ret;
+ /* REVISIT the fault reporting model here is weak:
+ *
+ * - When we get an error after receiving N bytes from a slave,
+ * there is no way to report "N".
+ *
+ * - When we get a NAK after transmitting N bytes to a slave,
+ * there is no way to report "N" ... or to let the master
+ * continue executing the rest of this combined message, if
+ * that's the appropriate response.
+ *
+ * - When for example "num" is two and we successfully complete
+ * the first message but get an error part way through the
+ * second, it's unclear whether that should be reported as
+ * one (discarding status on the second message) or errno
+ * (discarding status on the first one).
+ */
+
if (adap->algo->master_xfer) {
#ifdef DEBUG
for (ret = 0; ret < num; ret++) {
}
EXPORT_SYMBOL(i2c_transfer);
+/**
+ * i2c_master_send - issue a single I2C message in master transmit mode
+ * @client: Handle to slave device
+ * @buf: Data that will be written to the slave
+ * @count: How many bytes to write
+ *
+ * Returns negative errno, or else the number of bytes written.
+ */
int i2c_master_send(struct i2c_client *client,const char *buf ,int count)
{
int ret;
}
EXPORT_SYMBOL(i2c_master_send);
+/**
+ * i2c_master_recv - issue a single I2C message in master receive mode
+ * @client: Handle to slave device
+ * @buf: Where to store data read from slave
+ * @count: How many bytes to read
+ *
+ * Returns negative errno, or else the number of bytes read.
+ */
int i2c_master_recv(struct i2c_client *client, char *buf ,int count)
{
struct i2c_adapter *adap=client->adapter;
}
EXPORT_SYMBOL(i2c_probe);
+/* Separate detection function for new-style drivers */
+static int i2c_detect_address(struct i2c_client *temp_client, int kind,
+ struct i2c_driver *driver)
+{
+ struct i2c_board_info info;
+ struct i2c_adapter *adapter = temp_client->adapter;
+ int addr = temp_client->addr;
+ int err;
+
+ /* Make sure the address is valid */
+ if (addr < 0x03 || addr > 0x77) {
+ dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n",
+ addr);
+ return -EINVAL;
+ }
+
+ /* Skip if already in use */
+ if (i2c_check_addr(adapter, addr))
+ return 0;
+
+ /* Make sure there is something at this address, unless forced */
+ if (kind < 0) {
+ if (i2c_smbus_xfer(adapter, addr, 0, 0, 0,
+ I2C_SMBUS_QUICK, NULL) < 0)
+ return 0;
+
+ /* prevent 24RF08 corruption */
+ if ((addr & ~0x0f) == 0x50)
+ i2c_smbus_xfer(adapter, addr, 0, 0, 0,
+ I2C_SMBUS_QUICK, NULL);
+ }
+
+ /* Finally call the custom detection function */
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = addr;
+ err = driver->detect(temp_client, kind, &info);
+ if (err) {
+ /* -ENODEV is returned if the detection fails. We catch it
+ here as this isn't an error. */
+ return err == -ENODEV ? 0 : err;
+ }
+
+ /* Consistency check */
+ if (info.type[0] == '\0') {
+ dev_err(&adapter->dev, "%s detection function provided "
+ "no name for 0x%x\n", driver->driver.name,
+ addr);
+ } else {
+ struct i2c_client *client;
+
+ /* Detection succeeded, instantiate the device */
+ dev_dbg(&adapter->dev, "Creating %s at 0x%02x\n",
+ info.type, info.addr);
+ client = i2c_new_device(adapter, &info);
+ if (client)
+ list_add_tail(&client->detected, &driver->clients);
+ else
+ dev_err(&adapter->dev, "Failed creating %s at 0x%02x\n",
+ info.type, info.addr);
+ }
+ return 0;
+}
+
+static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
+{
+ const struct i2c_client_address_data *address_data;
+ struct i2c_client *temp_client;
+ int i, err = 0;
+ int adap_id = i2c_adapter_id(adapter);
+
+ address_data = driver->address_data;
+ if (!driver->detect || !address_data)
+ return 0;
+
+ /* Set up a temporary client to help detect callback */
+ temp_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ if (!temp_client)
+ return -ENOMEM;
+ temp_client->adapter = adapter;
+
+ /* Force entries are done first, and are not affected by ignore
+ entries */
+ if (address_data->forces) {
+ const unsigned short * const *forces = address_data->forces;
+ int kind;
+
+ for (kind = 0; forces[kind]; kind++) {
+ for (i = 0; forces[kind][i] != I2C_CLIENT_END;
+ i += 2) {
+ if (forces[kind][i] == adap_id
+ || forces[kind][i] == ANY_I2C_BUS) {
+ dev_dbg(&adapter->dev, "found force "
+ "parameter for adapter %d, "
+ "addr 0x%02x, kind %d\n",
+ adap_id, forces[kind][i + 1],
+ kind);
+ temp_client->addr = forces[kind][i + 1];
+ err = i2c_detect_address(temp_client,
+ kind, driver);
+ if (err)
+ goto exit_free;
+ }
+ }
+ }
+ }
+
+ /* Stop here if we can't use SMBUS_QUICK */
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
+ if (address_data->probe[0] == I2C_CLIENT_END
+ && address_data->normal_i2c[0] == I2C_CLIENT_END)
+ goto exit_free;
+
+ dev_warn(&adapter->dev, "SMBus Quick command not supported, "
+ "can't probe for chips\n");
+ err = -EOPNOTSUPP;
+ goto exit_free;
+ }
+
+ /* Stop here if the classes do not match */
+ if (!(adapter->class & driver->class))
+ goto exit_free;
+
+ /* Probe entries are done second, and are not affected by ignore
+ entries either */
+ for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) {
+ if (address_data->probe[i] == adap_id
+ || address_data->probe[i] == ANY_I2C_BUS) {
+ dev_dbg(&adapter->dev, "found probe parameter for "
+ "adapter %d, addr 0x%02x\n", adap_id,
+ address_data->probe[i + 1]);
+ temp_client->addr = address_data->probe[i + 1];
+ err = i2c_detect_address(temp_client, -1, driver);
+ if (err)
+ goto exit_free;
+ }
+ }
+
+ /* Normal entries are done last, unless shadowed by an ignore entry */
+ for (i = 0; address_data->normal_i2c[i] != I2C_CLIENT_END; i += 1) {
+ int j, ignore;
+
+ ignore = 0;
+ for (j = 0; address_data->ignore[j] != I2C_CLIENT_END;
+ j += 2) {
+ if ((address_data->ignore[j] == adap_id ||
+ address_data->ignore[j] == ANY_I2C_BUS)
+ && address_data->ignore[j + 1]
+ == address_data->normal_i2c[i]) {
+ dev_dbg(&adapter->dev, "found ignore "
+ "parameter for adapter %d, "
+ "addr 0x%02x\n", adap_id,
+ address_data->ignore[j + 1]);
+ ignore = 1;
+ break;
+ }
+ }
+ if (ignore)
+ continue;
+
+ dev_dbg(&adapter->dev, "found normal entry for adapter %d, "
+ "addr 0x%02x\n", adap_id,
+ address_data->normal_i2c[i]);
+ temp_client->addr = address_data->normal_i2c[i];
+ err = i2c_detect_address(temp_client, -1, driver);
+ if (err)
+ goto exit_free;
+ }
+
+ exit_free:
+ kfree(temp_client);
+ return err;
+}
+
struct i2c_client *
i2c_new_probed_device(struct i2c_adapter *adap,
struct i2c_board_info *info,
return 0;
}
+/**
+ * i2c_smbus_read_byte - SMBus "receive byte" protocol
+ * @client: Handle to slave device
+ *
+ * This executes the SMBus "receive byte" protocol, returning negative errno
+ * else the byte received from the device.
+ */
s32 i2c_smbus_read_byte(struct i2c_client *client)
{
union i2c_smbus_data data;
}
EXPORT_SYMBOL(i2c_smbus_read_byte);
+/**
+ * i2c_smbus_write_byte - SMBus "send byte" protocol
+ * @client: Handle to slave device
+ * @value: Byte to be sent
+ *
+ * This executes the SMBus "send byte" protocol, returning negative errno
+ * else zero on success.
+ */
s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value)
{
return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
}
EXPORT_SYMBOL(i2c_smbus_write_byte);
+/**
+ * i2c_smbus_read_byte_data - SMBus "read byte" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ *
+ * This executes the SMBus "read byte" protocol, returning negative errno
+ * else a data byte received from the device.
+ */
s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command)
{
union i2c_smbus_data data;
}
EXPORT_SYMBOL(i2c_smbus_read_byte_data);
+/**
+ * i2c_smbus_write_byte_data - SMBus "write byte" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @value: Byte being written
+ *
+ * This executes the SMBus "write byte" protocol, returning negative errno
+ * else zero on success.
+ */
s32 i2c_smbus_write_byte_data(struct i2c_client *client, u8 command, u8 value)
{
union i2c_smbus_data data;
}
EXPORT_SYMBOL(i2c_smbus_write_byte_data);
+/**
+ * i2c_smbus_read_word_data - SMBus "read word" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ *
+ * This executes the SMBus "read word" protocol, returning negative errno
+ * else a 16-bit unsigned "word" received from the device.
+ */
s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command)
{
union i2c_smbus_data data;
}
EXPORT_SYMBOL(i2c_smbus_read_word_data);
+/**
+ * i2c_smbus_write_word_data - SMBus "write word" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @value: 16-bit "word" being written
+ *
+ * This executes the SMBus "write word" protocol, returning negative errno
+ * else zero on success.
+ */
s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value)
{
union i2c_smbus_data data;
EXPORT_SYMBOL(i2c_smbus_write_word_data);
/**
- * i2c_smbus_read_block_data - SMBus block read request
+ * i2c_smbus_read_block_data - SMBus "block read" protocol
* @client: Handle to slave device
- * @command: Command byte issued to let the slave know what data should
- * be returned
+ * @command: Byte interpreted by slave
* @values: Byte array into which data will be read; big enough to hold
* the data returned by the slave. SMBus allows at most 32 bytes.
*
- * Returns the number of bytes read in the slave's response, else a
- * negative number to indicate some kind of error.
+ * This executes the SMBus "block read" protocol, returning negative errno
+ * else the number of data bytes in the slave's response.
*
* Note that using this function requires that the client's adapter support
* the I2C_FUNC_SMBUS_READ_BLOCK_DATA functionality. Not all adapter drivers
}
EXPORT_SYMBOL(i2c_smbus_read_block_data);
+/**
+ * i2c_smbus_write_block_data - SMBus "block write" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @length: Size of data block; SMBus allows at most 32 bytes
+ * @values: Byte array which will be written.
+ *
+ * This executes the SMBus "block write" protocol, returning negative errno
+ * else zero on success.
+ */
s32 i2c_smbus_write_block_data(struct i2c_client *client, u8 command,
u8 length, const u8 *values)
{
return 0;
}
-
+/**
+ * i2c_smbus_xfer - execute SMBus protocol operations
+ * @adapter: Handle to I2C bus
+ * @addr: Address of SMBus slave on that bus
+ * @flags: I2C_CLIENT_* flags (usually zero or I2C_CLIENT_PEC)
+ * @read_write: I2C_SMBUS_READ or I2C_SMBUS_WRITE
+ * @command: Byte interpreted by slave, for protocols which use such bytes
+ * @protocol: SMBus protocol operation to execute, such as I2C_SMBUS_PROC_CALL
+ * @data: Data to be read or written
+ *
+ * This executes an SMBus protocol operation, and returns a negative
+ * errno code else zero on success.
+ */
s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags,
- char read_write, u8 command, int size,
+ char read_write, u8 command, int protocol,
union i2c_smbus_data * data)
{
s32 res;
if (adapter->algo->smbus_xfer) {
mutex_lock(&adapter->bus_lock);
res = adapter->algo->smbus_xfer(adapter,addr,flags,read_write,
- command,size,data);
+ command, protocol, data);
mutex_unlock(&adapter->bus_lock);
} else
res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write,
- command,size,data);
+ command, protocol, data);
return res;
}