#include <linux/i2c.h>
#include <linux/i2c-isa.h>
#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
+#include <linux/mutex.h>
#include <asm/io.h>
#include "lm75.h"
* ISA constants
*/
-#define REGION_LENGTH 8
+#define REGION_ALIGNMENT ~7
+#define REGION_OFFSET 5
+#define REGION_LENGTH 2
#define ADDR_REG_OFFSET 5
#define DATA_REG_OFFSET 6
struct w83627ehf_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore lock;
+ struct mutex lock;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
struct w83627ehf_data *data = i2c_get_clientdata(client);
int res, word_sized = is_word_sized(reg);
- down(&data->lock);
+ mutex_lock(&data->lock);
w83627ehf_set_bank(client, reg);
outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET);
}
w83627ehf_reset_bank(client, reg);
- up(&data->lock);
+ mutex_unlock(&data->lock);
return res;
}
struct w83627ehf_data *data = i2c_get_clientdata(client);
int word_sized = is_word_sized(reg);
- down(&data->lock);
+ mutex_lock(&data->lock);
w83627ehf_set_bank(client, reg);
outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET);
outb_p(value & 0xff, client->addr + DATA_REG_OFFSET);
w83627ehf_reset_bank(client, reg);
- up(&data->lock);
+ mutex_unlock(&data->lock);
return 0;
}
struct w83627ehf_data *data = i2c_get_clientdata(client);
int i;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ)
|| !data->valid) {
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
#define show_fan_reg(reg) \
static ssize_t \
-show_##reg(struct device *dev, char *buf, int nr) \
+show_##reg(struct device *dev, struct device_attribute *attr, \
+ char *buf) \
{ \
struct w83627ehf_data *data = w83627ehf_update_device(dev); \
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+ int nr = sensor_attr->index; \
return sprintf(buf, "%d\n", \
fan_from_reg(data->reg[nr], \
div_from_reg(data->fan_div[nr]))); \
show_fan_reg(fan_min);
static ssize_t
-show_fan_div(struct device *dev, char *buf, int nr)
+show_fan_div(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
struct w83627ehf_data *data = w83627ehf_update_device(dev);
- return sprintf(buf, "%u\n",
- div_from_reg(data->fan_div[nr]));
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ return sprintf(buf, "%u\n", div_from_reg(data->fan_div[nr]));
}
static ssize_t
-store_fan_min(struct device *dev, const char *buf, size_t count, int nr)
+store_fan_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83627ehf_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
unsigned int val = simple_strtoul(buf, NULL, 10);
unsigned int reg;
u8 new_div;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (!val) {
/* No min limit, alarm disabled */
data->fan_min[nr] = 255;
}
w83627ehf_write_value(client, W83627EHF_REG_FAN_MIN[nr],
data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
-#define sysfs_fan_offset(offset) \
-static ssize_t \
-show_reg_fan_##offset(struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_fan(dev, buf, offset-1); \
-} \
-static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
- show_reg_fan_##offset, NULL);
+static struct sensor_device_attribute sda_fan_input[] = {
+ SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0),
+ SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1),
+ SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2),
+ SENSOR_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3),
+ SENSOR_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4),
+};
-#define sysfs_fan_min_offset(offset) \
-static ssize_t \
-show_reg_fan##offset##_min(struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_fan_min(dev, buf, offset-1); \
-} \
-static ssize_t \
-store_reg_fan##offset##_min(struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return store_fan_min(dev, buf, count, offset-1); \
-} \
-static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
- show_reg_fan##offset##_min, \
- store_reg_fan##offset##_min);
+static struct sensor_device_attribute sda_fan_min[] = {
+ SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min,
+ store_fan_min, 0),
+ SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min,
+ store_fan_min, 1),
+ SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min,
+ store_fan_min, 2),
+ SENSOR_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min,
+ store_fan_min, 3),
+ SENSOR_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min,
+ store_fan_min, 4),
+};
-#define sysfs_fan_div_offset(offset) \
-static ssize_t \
-show_reg_fan##offset##_div(struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_fan_div(dev, buf, offset - 1); \
-} \
-static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \
- show_reg_fan##offset##_div, NULL);
-
-sysfs_fan_offset(1);
-sysfs_fan_min_offset(1);
-sysfs_fan_div_offset(1);
-sysfs_fan_offset(2);
-sysfs_fan_min_offset(2);
-sysfs_fan_div_offset(2);
-sysfs_fan_offset(3);
-sysfs_fan_min_offset(3);
-sysfs_fan_div_offset(3);
-sysfs_fan_offset(4);
-sysfs_fan_min_offset(4);
-sysfs_fan_div_offset(4);
-sysfs_fan_offset(5);
-sysfs_fan_min_offset(5);
-sysfs_fan_div_offset(5);
+static struct sensor_device_attribute sda_fan_div[] = {
+ SENSOR_ATTR(fan1_div, S_IRUGO, show_fan_div, NULL, 0),
+ SENSOR_ATTR(fan2_div, S_IRUGO, show_fan_div, NULL, 1),
+ SENSOR_ATTR(fan3_div, S_IRUGO, show_fan_div, NULL, 2),
+ SENSOR_ATTR(fan4_div, S_IRUGO, show_fan_div, NULL, 3),
+ SENSOR_ATTR(fan5_div, S_IRUGO, show_fan_div, NULL, 4),
+};
+
+static void device_create_file_fan(struct device *dev, int i)
+{
+ device_create_file(dev, &sda_fan_input[i].dev_attr);
+ device_create_file(dev, &sda_fan_div[i].dev_attr);
+ device_create_file(dev, &sda_fan_min[i].dev_attr);
+}
#define show_temp1_reg(reg) \
static ssize_t \
struct w83627ehf_data *data = i2c_get_clientdata(client); \
u32 val = simple_strtoul(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->temp1_##reg = temp1_to_reg(val); \
w83627ehf_write_value(client, W83627EHF_REG_TEMP1_##REG, \
data->temp1_##reg); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
store_temp1_reg(OVER, max);
store_temp1_reg(HYST, max_hyst);
-static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1, NULL);
-static DEVICE_ATTR(temp1_max, S_IRUGO| S_IWUSR,
- show_temp1_max, store_temp1_max);
-static DEVICE_ATTR(temp1_max_hyst, S_IRUGO| S_IWUSR,
- show_temp1_max_hyst, store_temp1_max_hyst);
-
#define show_temp_reg(reg) \
static ssize_t \
-show_##reg (struct device *dev, char *buf, int nr) \
+show_##reg(struct device *dev, struct device_attribute *attr, \
+ char *buf) \
{ \
struct w83627ehf_data *data = w83627ehf_update_device(dev); \
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+ int nr = sensor_attr->index; \
return sprintf(buf, "%d\n", \
LM75_TEMP_FROM_REG(data->reg[nr])); \
}
#define store_temp_reg(REG, reg) \
static ssize_t \
-store_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+store_##reg(struct device *dev, struct device_attribute *attr, \
+ const char *buf, size_t count) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct w83627ehf_data *data = i2c_get_clientdata(client); \
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+ int nr = sensor_attr->index; \
u32 val = simple_strtoul(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->reg[nr] = LM75_TEMP_TO_REG(val); \
w83627ehf_write_value(client, W83627EHF_REG_TEMP_##REG[nr], \
data->reg[nr]); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
store_temp_reg(OVER, temp_max);
store_temp_reg(HYST, temp_max_hyst);
-#define sysfs_temp_offset(offset) \
-static ssize_t \
-show_reg_temp##offset (struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_temp(dev, buf, offset - 2); \
-} \
-static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
- show_reg_temp##offset, NULL);
-
-#define sysfs_temp_reg_offset(reg, offset) \
-static ssize_t \
-show_reg_temp##offset##_##reg(struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_temp_##reg(dev, buf, offset - 2); \
-} \
-static ssize_t \
-store_reg_temp##offset##_##reg(struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return store_temp_##reg(dev, buf, count, offset - 2); \
-} \
-static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, \
- show_reg_temp##offset##_##reg, \
- store_reg_temp##offset##_##reg);
-
-sysfs_temp_offset(2);
-sysfs_temp_reg_offset(max, 2);
-sysfs_temp_reg_offset(max_hyst, 2);
-sysfs_temp_offset(3);
-sysfs_temp_reg_offset(max, 3);
-sysfs_temp_reg_offset(max_hyst, 3);
+static struct sensor_device_attribute sda_temp[] = {
+ SENSOR_ATTR(temp1_input, S_IRUGO, show_temp1, NULL, 0),
+ SENSOR_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 0),
+ SENSOR_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 1),
+ SENSOR_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp1_max,
+ store_temp1_max, 0),
+ SENSOR_ATTR(temp2_max, S_IRUGO | S_IWUSR, show_temp_max,
+ store_temp_max, 0),
+ SENSOR_ATTR(temp3_max, S_IRUGO | S_IWUSR, show_temp_max,
+ store_temp_max, 1),
+ SENSOR_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp1_max_hyst,
+ store_temp1_max_hyst, 0),
+ SENSOR_ATTR(temp2_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
+ store_temp_max_hyst, 0),
+ SENSOR_ATTR(temp3_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
+ store_temp_max_hyst, 1),
+};
/*
* Driver and client management
{
struct i2c_client *client;
struct w83627ehf_data *data;
+ struct device *dev;
int i, err = 0;
- if (!request_region(address, REGION_LENGTH, w83627ehf_driver.name)) {
+ if (!request_region(address + REGION_OFFSET, REGION_LENGTH,
+ w83627ehf_driver.driver.name)) {
err = -EBUSY;
goto exit;
}
- if (!(data = kmalloc(sizeof(struct w83627ehf_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct w83627ehf_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit_release;
}
- memset(data, 0, sizeof(struct w83627ehf_data));
client = &data->client;
i2c_set_clientdata(client, data);
client->addr = address;
- init_MUTEX(&data->lock);
+ mutex_init(&data->lock);
client->adapter = adapter;
client->driver = &w83627ehf_driver;
client->flags = 0;
+ dev = &client->dev;
strlcpy(client->name, "w83627ehf", I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the i2c layer a new client has arrived */
if ((err = i2c_attach_client(client)))
data->has_fan |= (1 << 4);
/* Register sysfs hooks */
- data->class_dev = hwmon_device_register(&client->dev);
+ data->class_dev = hwmon_device_register(dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto exit_detach;
}
- device_create_file(&client->dev, &dev_attr_fan1_input);
- device_create_file(&client->dev, &dev_attr_fan1_min);
- device_create_file(&client->dev, &dev_attr_fan1_div);
- device_create_file(&client->dev, &dev_attr_fan2_input);
- device_create_file(&client->dev, &dev_attr_fan2_min);
- device_create_file(&client->dev, &dev_attr_fan2_div);
- device_create_file(&client->dev, &dev_attr_fan3_input);
- device_create_file(&client->dev, &dev_attr_fan3_min);
- device_create_file(&client->dev, &dev_attr_fan3_div);
-
- if (data->has_fan & (1 << 3)) {
- device_create_file(&client->dev, &dev_attr_fan4_input);
- device_create_file(&client->dev, &dev_attr_fan4_min);
- device_create_file(&client->dev, &dev_attr_fan4_div);
+ for (i = 0; i < 5; i++) {
+ if (data->has_fan & (1 << i))
+ device_create_file_fan(dev, i);
}
- if (data->has_fan & (1 << 4)) {
- device_create_file(&client->dev, &dev_attr_fan5_input);
- device_create_file(&client->dev, &dev_attr_fan5_min);
- device_create_file(&client->dev, &dev_attr_fan5_div);
- }
-
- device_create_file(&client->dev, &dev_attr_temp1_input);
- device_create_file(&client->dev, &dev_attr_temp1_max);
- device_create_file(&client->dev, &dev_attr_temp1_max_hyst);
- device_create_file(&client->dev, &dev_attr_temp2_input);
- device_create_file(&client->dev, &dev_attr_temp2_max);
- device_create_file(&client->dev, &dev_attr_temp2_max_hyst);
- device_create_file(&client->dev, &dev_attr_temp3_input);
- device_create_file(&client->dev, &dev_attr_temp3_max);
- device_create_file(&client->dev, &dev_attr_temp3_max_hyst);
+ for (i = 0; i < ARRAY_SIZE(sda_temp); i++)
+ device_create_file(dev, &sda_temp[i].dev_attr);
return 0;
exit_free:
kfree(data);
exit_release:
- release_region(address, REGION_LENGTH);
+ release_region(address + REGION_OFFSET, REGION_LENGTH);
exit:
return err;
}
hwmon_device_unregister(data->class_dev);
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
+ if ((err = i2c_detach_client(client)))
return err;
- }
- release_region(client->addr, REGION_LENGTH);
+ release_region(client->addr + REGION_OFFSET, REGION_LENGTH);
kfree(data);
return 0;
}
static struct i2c_driver w83627ehf_driver = {
- .owner = THIS_MODULE,
- .name = "w83627ehf",
+ .driver = {
+ .name = "w83627ehf",
+ },
.attach_adapter = w83627ehf_detect,
.detach_client = w83627ehf_detach_client,
};
superio_select(W83627EHF_LD_HWM);
val = (superio_inb(SIO_REG_ADDR) << 8)
| superio_inb(SIO_REG_ADDR + 1);
- *addr = val & ~(REGION_LENGTH - 1);
+ *addr = val & REGION_ALIGNMENT;
if (*addr == 0) {
superio_exit();
return -ENODEV;