#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-#include <linux/i2c-vid.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
/*
* Addresses to scan
*/
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/*
* Insmod parameters
*/
-SENSORS_INSMOD_1(lm87);
+I2C_CLIENT_INSMOD_1(lm87);
/*
* The LM87 registers
*/
static struct i2c_driver lm87_driver = {
- .owner = THIS_MODULE,
- .name = "lm87",
+ .driver = {
+ .name = "lm87",
+ },
.id = I2C_DRIVERID_LM87,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = lm87_attach_adapter,
.detach_client = lm87_detach_client,
};
struct lm87_data {
struct i2c_client client;
- struct semaphore update_lock;
+ struct class_device *class_dev;
+ struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* In jiffies */
struct lm87_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_min[nr] = IN_TO_REG(val, data->in_scale[nr]);
lm87_write_value(client, nr<6 ? LM87_REG_IN_MIN(nr) :
LM87_REG_AIN_MIN(nr-6), data->in_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
}
static void set_in_max(struct device *dev, const char *buf, int nr)
struct lm87_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_max[nr] = IN_TO_REG(val, data->in_scale[nr]);
lm87_write_value(client, nr<6 ? LM87_REG_IN_MAX(nr) :
LM87_REG_AIN_MAX(nr-6), data->in_max[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
}
#define set_in(offset) \
struct lm87_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_low[nr] = TEMP_TO_REG(val);
lm87_write_value(client, LM87_REG_TEMP_LOW[nr], data->temp_low[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
}
static void set_temp_high(struct device *dev, const char *buf, int nr)
struct lm87_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_high[nr] = TEMP_TO_REG(val);
lm87_write_value(client, LM87_REG_TEMP_HIGH[nr], data->temp_high[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
}
#define set_temp(offset) \
struct lm87_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val,
FAN_DIV_FROM_REG(data->fan_div[nr]));
lm87_write_value(client, LM87_REG_FAN_MIN(nr), data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
}
/* Note: we save and restore the fan minimum here, because its value is
determined in part by the fan clock divider. This follows the principle
- of least suprise; the user doesn't expect the fan minimum to change just
+ of least surprise; the user doesn't expect the fan minimum to change just
because the divider changed. */
static ssize_t set_fan_div(struct device *dev, const char *buf,
size_t count, int nr)
unsigned long min;
u8 reg;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
min = FAN_FROM_REG(data->fan_min[nr],
FAN_DIV_FROM_REG(data->fan_div[nr]));
case 4: data->fan_div[nr] = 2; break;
case 8: data->fan_div[nr] = 3; break;
default:
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return -EINVAL;
}
data->fan_min[nr] = FAN_TO_REG(min, val);
lm87_write_value(client, LM87_REG_FAN_MIN(nr),
data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
struct lm87_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->aout = AOUT_TO_REG(val);
lm87_write_value(client, LM87_REG_AOUT, data->aout);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout);
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
- return i2c_detect(adapter, &addr_data, lm87_detect);
+ return i2c_probe(adapter, &addr_data, lm87_detect);
}
+static struct attribute *lm87_attributes[] = {
+ &dev_attr_in1_input.attr,
+ &dev_attr_in1_min.attr,
+ &dev_attr_in1_max.attr,
+ &dev_attr_in2_input.attr,
+ &dev_attr_in2_min.attr,
+ &dev_attr_in2_max.attr,
+ &dev_attr_in3_input.attr,
+ &dev_attr_in3_min.attr,
+ &dev_attr_in3_max.attr,
+ &dev_attr_in4_input.attr,
+ &dev_attr_in4_min.attr,
+ &dev_attr_in4_max.attr,
+
+ &dev_attr_temp1_input.attr,
+ &dev_attr_temp1_max.attr,
+ &dev_attr_temp1_min.attr,
+ &dev_attr_temp1_crit.attr,
+ &dev_attr_temp2_input.attr,
+ &dev_attr_temp2_max.attr,
+ &dev_attr_temp2_min.attr,
+ &dev_attr_temp2_crit.attr,
+
+ &dev_attr_alarms.attr,
+ &dev_attr_aout_output.attr,
+
+ NULL
+};
+
+static const struct attribute_group lm87_group = {
+ .attrs = lm87_attributes,
+};
+
+static struct attribute *lm87_attributes_opt[] = {
+ &dev_attr_in6_input.attr,
+ &dev_attr_in6_min.attr,
+ &dev_attr_in6_max.attr,
+
+ &dev_attr_fan1_input.attr,
+ &dev_attr_fan1_min.attr,
+ &dev_attr_fan1_div.attr,
+
+ &dev_attr_in7_input.attr,
+ &dev_attr_in7_min.attr,
+ &dev_attr_in7_max.attr,
+
+ &dev_attr_fan2_input.attr,
+ &dev_attr_fan2_min.attr,
+ &dev_attr_fan2_div.attr,
+
+ &dev_attr_temp3_input.attr,
+ &dev_attr_temp3_max.attr,
+ &dev_attr_temp3_min.attr,
+ &dev_attr_temp3_crit.attr,
+
+ &dev_attr_in0_input.attr,
+ &dev_attr_in0_min.attr,
+ &dev_attr_in0_max.attr,
+ &dev_attr_in5_input.attr,
+ &dev_attr_in5_min.attr,
+ &dev_attr_in5_max.attr,
+
+ &dev_attr_cpu0_vid.attr,
+ &dev_attr_vrm.attr,
+
+ NULL
+};
+
+static const struct attribute_group lm87_group_opt = {
+ .attrs = lm87_attributes_opt,
+};
+
/*
* The following function does more than just detection. If detection
* succeeds, it also registers the new chip.
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct lm87_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm87_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct lm87_data));
/* The common I2C client data is placed right before the
LM87-specific data. */
/* We can fill in the remaining client fields */
strlcpy(new_client->name, "lm87", I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
data->in_scale[7] = 1875;
/* Register sysfs hooks */
- device_create_file(&new_client->dev, &dev_attr_in1_input);
- device_create_file(&new_client->dev, &dev_attr_in1_min);
- device_create_file(&new_client->dev, &dev_attr_in1_max);
- device_create_file(&new_client->dev, &dev_attr_in2_input);
- device_create_file(&new_client->dev, &dev_attr_in2_min);
- device_create_file(&new_client->dev, &dev_attr_in2_max);
- device_create_file(&new_client->dev, &dev_attr_in3_input);
- device_create_file(&new_client->dev, &dev_attr_in3_min);
- device_create_file(&new_client->dev, &dev_attr_in3_max);
- device_create_file(&new_client->dev, &dev_attr_in4_input);
- device_create_file(&new_client->dev, &dev_attr_in4_min);
- device_create_file(&new_client->dev, &dev_attr_in4_max);
+ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm87_group)))
+ goto exit_detach;
if (data->channel & CHAN_NO_FAN(0)) {
- device_create_file(&new_client->dev, &dev_attr_in6_input);
- device_create_file(&new_client->dev, &dev_attr_in6_min);
- device_create_file(&new_client->dev, &dev_attr_in6_max);
+ if ((err = device_create_file(&new_client->dev,
+ &dev_attr_in6_input))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_in6_min))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_in6_max)))
+ goto exit_remove;
} else {
- device_create_file(&new_client->dev, &dev_attr_fan1_input);
- device_create_file(&new_client->dev, &dev_attr_fan1_min);
- device_create_file(&new_client->dev, &dev_attr_fan1_div);
+ if ((err = device_create_file(&new_client->dev,
+ &dev_attr_fan1_input))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_fan1_min))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_fan1_div)))
+ goto exit_remove;
}
+
if (data->channel & CHAN_NO_FAN(1)) {
- device_create_file(&new_client->dev, &dev_attr_in7_input);
- device_create_file(&new_client->dev, &dev_attr_in7_min);
- device_create_file(&new_client->dev, &dev_attr_in7_max);
+ if ((err = device_create_file(&new_client->dev,
+ &dev_attr_in7_input))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_in7_min))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_in7_max)))
+ goto exit_remove;
} else {
- device_create_file(&new_client->dev, &dev_attr_fan2_input);
- device_create_file(&new_client->dev, &dev_attr_fan2_min);
- device_create_file(&new_client->dev, &dev_attr_fan2_div);
+ if ((err = device_create_file(&new_client->dev,
+ &dev_attr_fan2_input))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_fan2_min))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_fan2_div)))
+ goto exit_remove;
}
- device_create_file(&new_client->dev, &dev_attr_temp1_input);
- device_create_file(&new_client->dev, &dev_attr_temp1_max);
- device_create_file(&new_client->dev, &dev_attr_temp1_min);
- device_create_file(&new_client->dev, &dev_attr_temp1_crit);
- device_create_file(&new_client->dev, &dev_attr_temp2_input);
- device_create_file(&new_client->dev, &dev_attr_temp2_max);
- device_create_file(&new_client->dev, &dev_attr_temp2_min);
- device_create_file(&new_client->dev, &dev_attr_temp2_crit);
-
if (data->channel & CHAN_TEMP3) {
- device_create_file(&new_client->dev, &dev_attr_temp3_input);
- device_create_file(&new_client->dev, &dev_attr_temp3_max);
- device_create_file(&new_client->dev, &dev_attr_temp3_min);
- device_create_file(&new_client->dev, &dev_attr_temp3_crit);
+ if ((err = device_create_file(&new_client->dev,
+ &dev_attr_temp3_input))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_temp3_max))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_temp3_min))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_temp3_crit)))
+ goto exit_remove;
} else {
- device_create_file(&new_client->dev, &dev_attr_in0_input);
- device_create_file(&new_client->dev, &dev_attr_in0_min);
- device_create_file(&new_client->dev, &dev_attr_in0_max);
- device_create_file(&new_client->dev, &dev_attr_in5_input);
- device_create_file(&new_client->dev, &dev_attr_in5_min);
- device_create_file(&new_client->dev, &dev_attr_in5_max);
+ if ((err = device_create_file(&new_client->dev,
+ &dev_attr_in0_input))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_in0_min))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_in0_max))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_in5_input))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_in5_min))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_in5_max)))
+ goto exit_remove;
}
if (!(data->channel & CHAN_NO_VID)) {
- device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
- device_create_file(&new_client->dev, &dev_attr_vrm);
+ if ((err = device_create_file(&new_client->dev,
+ &dev_attr_cpu0_vid))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_vrm)))
+ goto exit_remove;
}
- device_create_file(&new_client->dev, &dev_attr_alarms);
- device_create_file(&new_client->dev, &dev_attr_aout_output);
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_remove;
+ }
return 0;
+exit_remove:
+ sysfs_remove_group(&new_client->dev.kobj, &lm87_group);
+ sysfs_remove_group(&new_client->dev.kobj, &lm87_group_opt);
+exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
u8 config;
data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE);
- data->vrm = i2c_which_vrm();
+ data->vrm = vid_which_vrm();
config = lm87_read_value(client, LM87_REG_CONFIG);
if (!(config & 0x01)) {
static int lm87_detach_client(struct i2c_client *client)
{
+ struct lm87_data *data = i2c_get_clientdata(client);
int err;
- if ((err = i2c_detach_client(client))) {
- dev_err(&client->dev, "Client deregistration failed, "
- "client not detached.\n");
+ hwmon_device_unregister(data->class_dev);
+ sysfs_remove_group(&client->dev.kobj, &lm87_group);
+ sysfs_remove_group(&client->dev.kobj, &lm87_group_opt);
+
+ if ((err = i2c_detach_client(client)))
return err;
- }
- kfree(i2c_get_clientdata(client));
+ kfree(data);
return 0;
}
struct i2c_client *client = to_i2c_client(dev);
struct lm87_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
int i, j;
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}