* Philip Edelbrock <phil@netroedge.com>
* Stephen Rousset <stephen.rousset@rocketlogix.com>
* Dan Eaton <dan.eaton@rocketlogix.com>
- * Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2004-2008 Jean Delvare <khali@linux-fr.org>
*
* Original port to Linux 2.6 by Jeff Oliver.
*
* instead. The LM87 is the only hardware monitoring chipset I know of
* which uses amplitude modulation. Be careful when using this feature.
*
+ * This driver also supports the ADM1024, a sensor chip made by Analog
+ * Devices. That chip is fully compatible with the LM87. Complete
+ * datasheet can be obtained from Analog's website at:
+ * http://www.analog.com/en/prod/0,2877,ADM1024,00.html
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* LM87 has three possible addresses: 0x2c, 0x2d and 0x2e.
*/
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
/*
* Insmod parameters
*/
-I2C_CLIENT_INSMOD_1(lm87);
+I2C_CLIENT_INSMOD_2(lm87, adm1024);
/*
* The LM87 registers
#define CHAN_NO_FAN(nr) (1 << (nr))
#define CHAN_TEMP3 (1 << 2)
#define CHAN_VCC_5V (1 << 3)
-#define CHAN_NO_VID (1 << 8)
+#define CHAN_NO_VID (1 << 7)
/*
* Functions declaration
*/
-static int lm87_attach_adapter(struct i2c_adapter *adapter);
-static int lm87_detect(struct i2c_adapter *adapter, int address, int kind);
+static int lm87_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int lm87_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info);
static void lm87_init_client(struct i2c_client *client);
-static int lm87_detach_client(struct i2c_client *client);
+static int lm87_remove(struct i2c_client *client);
static struct lm87_data *lm87_update_device(struct device *dev);
/*
* Driver data (common to all clients)
*/
+static const struct i2c_device_id lm87_id[] = {
+ { "lm87", lm87 },
+ { "adm1024", adm1024 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lm87_id);
+
static struct i2c_driver lm87_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "lm87",
},
- .id = I2C_DRIVERID_LM87,
- .attach_adapter = lm87_attach_adapter,
- .detach_client = lm87_detach_client,
+ .probe = lm87_probe,
+ .remove = lm87_remove,
+ .id_table = lm87_id,
+ .detect = lm87_detect,
+ .address_data = &addr_data,
};
/*
*/
struct lm87_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct lm87_data *data = lm87_update_device(dev);
+ struct lm87_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", data->vrm);
}
static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct lm87_data *data = i2c_get_clientdata(client);
+ struct lm87_data *data = dev_get_drvdata(dev);
data->vrm = simple_strtoul(buf, NULL, 10);
return count;
}
* Real code
*/
-static int lm87_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, lm87_detect);
-}
-
static struct attribute *lm87_attributes[] = {
&dev_attr_in1_input.attr,
&dev_attr_in1_min.attr,
.attrs = lm87_attributes_opt,
};
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int lm87_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm87_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info)
{
- struct i2c_client *new_client;
- struct lm87_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = new_client->adapter;
+ static const char *names[] = { "lm87", "adm1024" };
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- if (!(data = kzalloc(sizeof(struct lm87_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- /* The common I2C client data is placed right before the
- LM87-specific data. */
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &lm87_driver;
- new_client->flags = 0;
+ return -ENODEV;
/* Default to an LM87 if forced */
if (kind == 0)
/* Now, we do the remaining detection. */
if (kind < 0) {
+ u8 cid = lm87_read_value(new_client, LM87_REG_COMPANY_ID);
u8 rev = lm87_read_value(new_client, LM87_REG_REVISION);
- if (rev < 0x01 || rev > 0x08
- || (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)
- || lm87_read_value(new_client, LM87_REG_COMPANY_ID) != 0x02) {
+ if (cid == 0x02 /* National Semiconductor */
+ && (rev >= 0x01 && rev <= 0x08))
+ kind = lm87;
+ else if (cid == 0x41 /* Analog Devices */
+ && (rev & 0xf0) == 0x10)
+ kind = adm1024;
+
+ if (kind < 0
+ || (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)) {
dev_dbg(&adapter->dev,
"LM87 detection failed at 0x%02x.\n",
- address);
- goto exit_free;
+ new_client->addr);
+ return -ENODEV;
}
}
- /* We can fill in the remaining client fields */
- strlcpy(new_client->name, "lm87", I2C_NAME_SIZE);
+ strlcpy(info->type, names[kind - 1], I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int lm87_probe(struct i2c_client *new_client,
+ const struct i2c_device_id *id)
+{
+ struct lm87_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct lm87_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(new_client, data);
data->valid = 0;
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
-
/* Initialize the LM87 chip */
lm87_init_client(new_client);
/* Register sysfs hooks */
if ((err = sysfs_create_group(&new_client->dev.kobj, &lm87_group)))
- goto exit_detach;
+ goto exit_free;
if (data->channel & CHAN_NO_FAN(0)) {
if ((err = device_create_file(&new_client->dev,
exit_remove:
sysfs_remove_group(&new_client->dev.kobj, &lm87_group);
sysfs_remove_group(&new_client->dev.kobj, &lm87_group_opt);
-exit_detach:
- i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
}
}
-static int lm87_detach_client(struct i2c_client *client)
+static int lm87_remove(struct i2c_client *client)
{
struct lm87_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm87_group);
sysfs_remove_group(&client->dev.kobj, &lm87_group_opt);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
}