[PATCH] IP27: Really set PCI64_ATTR_VIRTUAL, not PCI64_ATTR_PREC.

[linux-2.6] / drivers / hwmon / lm83.c

diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c
index 26dfa9e216c2814f9419b318ed8289e46f6b8a21..2137d7879df668f1f91e46d94a77ed8a2adca043 100644 (file)
--- a/drivers/hwmon/lm83.c
+++ b/drivers/hwmon/lm83.c
@@ -12,6 +12,10 @@
  * Since the datasheet omits to give the chip stepping code, I give it
  * here: 0x03 (at register 0xff).
  *
+ * Also supports the LM82 temp sensor, which is basically a stripped down
+ * model of the LM83.  Datasheet is here:
+ * http://www.national.com/pf/LM/LM82.html
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -35,6 +39,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/hwmon.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 /*
  * Addresses to scan
@@ -51,7 +56,7 @@ static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
  * Insmod parameters
  */
 
-I2C_CLIENT_INSMOD_1(lm83);
+I2C_CLIENT_INSMOD_2(lm83, lm82);
 
 /*
  * The LM83 registers
@@ -139,7 +144,7 @@ static struct i2c_driver lm83_driver = {
 struct lm83_data {
        struct i2c_client client;
        struct class_device *class_dev;
-       struct semaphore update_lock;
+       struct mutex update_lock;
        char valid; /* zero until following fields are valid */
        unsigned long last_updated; /* in jiffies */
 
@@ -171,11 +176,11 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *devattr,
        long val = simple_strtol(buf, NULL, 10);
        int nr = attr->index;
 
-       down(&data->update_lock);
+       mutex_lock(&data->update_lock);
        data->temp[nr] = TEMP_TO_REG(val);
        i2c_smbus_write_byte_data(client, LM83_REG_W_HIGH[nr - 4],
                                  data->temp[nr]);
-       up(&data->update_lock);
+       mutex_unlock(&data->update_lock);
        return count;
 }
 
@@ -282,6 +287,9 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind)
                if (man_id == 0x01) { /* National Semiconductor */
                        if (chip_id == 0x03) {
                                kind = lm83;
+                       } else
+                       if (chip_id == 0x01) {
+                               kind = lm82;
                        }
                }
 
@@ -295,12 +303,15 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind)
 
        if (kind == lm83) {
                name = "lm83";
+       } else
+       if (kind == lm82) {
+               name = "lm82";
        }
 
        /* We can fill in the remaining client fields */
        strlcpy(new_client->name, name, I2C_NAME_SIZE);
        data->valid = 0;
-       init_MUTEX(&data->update_lock);
+       mutex_init(&data->update_lock);
 
        /* Tell the I2C layer a new client has arrived */
        if ((err = i2c_attach_client(new_client)))
@@ -318,32 +329,46 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind)
                goto exit_detach;
        }
 
+       /*
+        * The LM82 can only monitor one external diode which is
+        * at the same register as the LM83 temp3 entry - so we
+        * declare 1 and 3 common, and then 2 and 4 only for the LM83.
+        */
+
        device_create_file(&new_client->dev,
                           &sensor_dev_attr_temp1_input.dev_attr);
-       device_create_file(&new_client->dev,
-                          &sensor_dev_attr_temp2_input.dev_attr);
        device_create_file(&new_client->dev,
                           &sensor_dev_attr_temp3_input.dev_attr);
-       device_create_file(&new_client->dev,
-                          &sensor_dev_attr_temp4_input.dev_attr);
+
        device_create_file(&new_client->dev,
                           &sensor_dev_attr_temp1_max.dev_attr);
-       device_create_file(&new_client->dev,
-                          &sensor_dev_attr_temp2_max.dev_attr);
        device_create_file(&new_client->dev,
                           &sensor_dev_attr_temp3_max.dev_attr);
-       device_create_file(&new_client->dev,
-                          &sensor_dev_attr_temp4_max.dev_attr);
+
        device_create_file(&new_client->dev,
                           &sensor_dev_attr_temp1_crit.dev_attr);
-       device_create_file(&new_client->dev,
-                          &sensor_dev_attr_temp2_crit.dev_attr);
        device_create_file(&new_client->dev,
                           &sensor_dev_attr_temp3_crit.dev_attr);
-       device_create_file(&new_client->dev,
-                          &sensor_dev_attr_temp4_crit.dev_attr);
+
        device_create_file(&new_client->dev, &dev_attr_alarms);
 
+       if (kind == lm83) {
+               device_create_file(&new_client->dev,
+                                  &sensor_dev_attr_temp2_input.dev_attr);
+               device_create_file(&new_client->dev,
+                                  &sensor_dev_attr_temp4_input.dev_attr);
+
+               device_create_file(&new_client->dev,
+                                  &sensor_dev_attr_temp2_max.dev_attr);
+               device_create_file(&new_client->dev,
+                                  &sensor_dev_attr_temp4_max.dev_attr);
+
+               device_create_file(&new_client->dev,
+                                  &sensor_dev_attr_temp2_crit.dev_attr);
+               device_create_file(&new_client->dev,
+                                  &sensor_dev_attr_temp4_crit.dev_attr);
+       }
+
        return 0;
 
 exit_detach:
@@ -373,7 +398,7 @@ static struct lm83_data *lm83_update_device(struct device *dev)
        struct i2c_client *client = to_i2c_client(dev);
        struct lm83_data *data = i2c_get_clientdata(client);
 
-       down(&data->update_lock);
+       mutex_lock(&data->update_lock);
 
        if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
                int nr;
@@ -393,7 +418,7 @@ static struct lm83_data *lm83_update_device(struct device *dev)
                data->valid = 1;
        }
 
-       up(&data->update_lock);
+       mutex_unlock(&data->update_lock);
 
        return data;
 }