Supports: IT8705F Super I/O chip w/LPC interface
IT8712F Super I/O chip w/LPC interface & SMBus
IT8716F Super I/O chip w/LPC interface
+ IT8718F Super I/O chip w/LPC interface
Sis950 A clone of the IT8705F
Copyright (C) 2001 Chris Gauthron <chrisg@0-in.com>
static unsigned short isa_address;
/* Insmod parameters */
-I2C_CLIENT_INSMOD_3(it87, it8712, it8716);
+I2C_CLIENT_INSMOD_4(it87, it8712, it8716, it8718);
#define REG 0x2e /* The register to read/write */
#define DEV 0x07 /* Register: Logical device select */
#define VAL 0x2f /* The value to read/write */
#define PME 0x04 /* The device with the fan registers in it */
+#define GPIO 0x07 /* The device with the IT8718F VID value in it */
#define DEVID 0x20 /* Register: Device ID */
#define DEVREV 0x22 /* Register: Device Revision */
}
static inline void
-superio_select(void)
+superio_select(int ldn)
{
outb(DEV, REG);
- outb(PME, VAL);
+ outb(ldn, VAL);
}
static inline void
outb(0x02, VAL);
}
+/* Logical device 4 registers */
#define IT8712F_DEVID 0x8712
#define IT8705F_DEVID 0x8705
#define IT8716F_DEVID 0x8716
+#define IT8718F_DEVID 0x8718
#define IT87_ACT_REG 0x30
#define IT87_BASE_REG 0x60
+/* Logical device 7 registers (IT8712F and later) */
+#define IT87_SIO_PINX2_REG 0x2c /* Pin selection */
+#define IT87_SIO_VID_REG 0xfc /* VID value */
+
/* Update battery voltage after every reading if true */
static int update_vbat;
/* Not all BIOSes properly configure the PWM registers */
static int fix_pwm_polarity;
-/* Chip Type */
-
+/* Values read from Super-I/O config space */
static u16 chip_type;
+static u8 vid_value;
/* Many IT87 constants specified below */
#define IT87_REG_ALARM2 0x02
#define IT87_REG_ALARM3 0x03
+/* The IT8718F has the VID value in a different register, in Super-I/O
+ configuration space. */
#define IT87_REG_VID 0x0a
/* Warning: register 0x0b is used for something completely different in
new chips/revisions. I suspect only 16-bit tachometer mode will work
static int DIV_TO_REG(int val)
{
int answer = 0;
- while ((val >>= 1) != 0)
+ while (answer < 7 && (val >>= 1))
answer++;
return answer;
}
unsigned long last_updated; /* In jiffies */
u8 in[9]; /* Register value */
- u8 in_max[9]; /* Register value */
- u8 in_min[9]; /* Register value */
+ u8 in_max[8]; /* Register value */
+ u8 in_min[8]; /* Register value */
u8 has_fan; /* Bitfield, fans enabled */
u16 fan[3]; /* Register values, possibly combined */
u16 fan_min[3]; /* Register values, possibly combined */
struct i2c_client *client = to_i2c_client(dev);
struct it87_data *data = i2c_get_clientdata(client);
- int val = simple_strtol(buf, NULL, 10);
- int i, min[3];
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+ int min;
u8 old;
mutex_lock(&data->update_lock);
old = it87_read_value(client, IT87_REG_FAN_DIV);
- for (i = 0; i < 3; i++)
- min[i] = FAN_FROM_REG(data->fan_min[i], DIV_FROM_REG(data->fan_div[i]));
+ /* Save fan min limit */
+ min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr]));
switch (nr) {
case 0:
val |= 0x1 << 6;
it87_write_value(client, IT87_REG_FAN_DIV, val);
- for (i = 0; i < 3; i++) {
- data->fan_min[i]=FAN_TO_REG(min[i], DIV_FROM_REG(data->fan_div[i]));
- it87_write_value(client, IT87_REG_FAN_MIN(i), data->fan_min[i]);
- }
+ /* Restore fan min limit */
+ data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+ it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
+
mutex_unlock(&data->update_lock);
return count;
}
chip_type = superio_inw(DEVID);
if (chip_type != IT8712F_DEVID
&& chip_type != IT8716F_DEVID
+ && chip_type != IT8718F_DEVID
&& chip_type != IT8705F_DEVID)
goto exit;
- superio_select();
+ superio_select(PME);
if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
pr_info("it87: Device not activated, skipping\n");
goto exit;
pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
chip_type, *address, superio_inb(DEVREV) & 0x0f);
+ /* Read GPIO config and VID value from LDN 7 (GPIO) */
+ if (chip_type != IT8705F_DEVID) {
+ int reg;
+
+ superio_select(GPIO);
+ if (chip_type == it8718)
+ vid_value = superio_inb(IT87_SIO_VID_REG);
+
+ reg = superio_inb(IT87_SIO_PINX2_REG);
+ if (reg & (1 << 0))
+ pr_info("it87: in3 is VCC (+5V)\n");
+ if (reg & (1 << 1))
+ pr_info("it87: in7 is VCCH (+5V Stand-By)\n");
+ }
+
exit:
superio_exit();
return err;
case IT8716F_DEVID:
kind = it8716;
break;
+ case IT8718F_DEVID:
+ kind = it8718;
+ break;
}
}
}
name = "it8712";
} else if (kind == it8716) {
name = "it8716";
+ } else if (kind == it8718) {
+ name = "it8718";
}
/* Fill in the remaining client fields and put it into the global list */
device_create_file(&new_client->dev, &sensor_dev_attr_temp3_type.dev_attr);
/* Do not create fan files for disabled fans */
- if (data->type == it8716) { /* 16-bit tachometers */
+ if (data->type == it8716 || data->type == it8718) {
+ /* 16-bit tachometers */
if (data->has_fan & (1 << 0)) {
device_create_file(&new_client->dev,
&sensor_dev_attr_fan1_input16.dev_attr);
&sensor_dev_attr_fan3_min16.dev_attr);
}
} else {
+ /* 8-bit tachometers with clock divider */
if (data->has_fan & (1 << 0)) {
device_create_file(&new_client->dev,
&sensor_dev_attr_fan1_input.dev_attr);
device_create_file(&new_client->dev, &sensor_dev_attr_pwm3.dev_attr);
}
- if (data->type == it8712 || data->type == it8716) {
+ if (data->type == it8712 || data->type == it8716
+ || data->type == it8718) {
data->vrm = vid_which_vrm();
+ /* VID reading from Super-I/O config space if available */
+ data->vid = vid_value;
device_create_file_vrm(new_client);
device_create_file_vid(new_client);
}
data->manual_pwm_ctl[i] = 0xff;
}
+ /* Some chips seem to have default value 0xff for all limit
+ * registers. For low voltage limits it makes no sense and triggers
+ * alarms, so change to 0 instead. For high temperature limits, it
+ * means -1 degree C, which surprisingly doesn't trigger an alarm,
+ * but is still confusing, so change to 127 degrees C. */
+ for (i = 0; i < 8; i++) {
+ tmp = it87_read_value(client, IT87_REG_VIN_MIN(i));
+ if (tmp == 0xff)
+ it87_write_value(client, IT87_REG_VIN_MIN(i), 0);
+ }
+ for (i = 0; i < 3; i++) {
+ tmp = it87_read_value(client, IT87_REG_TEMP_HIGH(i));
+ if (tmp == 0xff)
+ it87_write_value(client, IT87_REG_TEMP_HIGH(i), 127);
+ }
+
/* Check if temperature channnels are reset manually or by some reason */
tmp = it87_read_value(client, IT87_REG_TEMP_ENABLE);
if ((tmp & 0x3f) == 0) {
data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
/* Set tachometers to 16-bit mode if needed */
- if (data->type == it8716) {
+ if (data->type == it8716 || data->type == it8718) {
tmp = it87_read_value(client, IT87_REG_FAN_16BIT);
if (~tmp & 0x07 & data->has_fan) {
dev_dbg(&client->dev,
data->in_max[i] =
it87_read_value(client, IT87_REG_VIN_MAX(i));
}
+ /* in8 (battery) has no limit registers */
data->in[8] =
it87_read_value(client, IT87_REG_VIN(8));
- /* Temperature sensor doesn't have limit registers, set
- to min and max value */
- data->in_min[8] = 0;
- data->in_max[8] = 255;
for (i = 0; i < 3; i++) {
/* Skip disabled fans */
data->fan[i] = it87_read_value(client,
IT87_REG_FAN(i));
/* Add high byte if in 16-bit mode */
- if (data->type == it8716) {
+ if (data->type == it8716 || data->type == it8718) {
data->fan[i] |= it87_read_value(client,
IT87_REG_FANX(i)) << 8;
data->fan_min[i] |= it87_read_value(client,
}
/* Newer chips don't have clock dividers */
- if ((data->has_fan & 0x07) && data->type != it8716) {
+ if ((data->has_fan & 0x07) && data->type != it8716
+ && data->type != it8718) {
i = it87_read_value(client, IT87_REG_FAN_DIV);
data->fan_div[0] = i & 0x07;
data->fan_div[1] = (i >> 3) & 0x07;
MODULE_AUTHOR("Chris Gauthron <chrisg@0-in.com>");
-MODULE_DESCRIPTION("IT8705F/8712F/8716F, SiS950 driver");
+MODULE_DESCRIPTION("IT8705F/8712F/8716F/8718F, SiS950 driver");
module_param(update_vbat, bool, 0);
MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
module_param(fix_pwm_polarity, bool, 0);
projects / linux-2.6 / blobdiff