#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
#include <linux/hwmon.h>
#include <linux/err.h>
+#include <linux/mutex.h>
#include "lm75.h"
/* Addresses to scan */
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
/* Insmod parameters */
-SENSORS_INSMOD_1(ds1621);
+I2C_CLIENT_INSMOD_1(ds1621);
static int polarity = -1;
module_param(polarity, int, 0);
MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low");
struct ds1621_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
/* This is the driver that will be inserted */
static struct i2c_driver ds1621_driver = {
- .owner = THIS_MODULE,
- .name = "ds1621",
+ .driver = {
+ .name = "ds1621",
+ },
.id = I2C_DRIVERID_DS1621,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = ds1621_attach_adapter,
.detach_client = ds1621_detach_client,
};
struct ds1621_data *data = ds1621_update_client(dev); \
u16 val = LM75_TEMP_TO_REG(simple_strtoul(buf, NULL, 10)); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->value = val; \
ds1621_write_value(client, reg, data->value); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
static int ds1621_attach_adapter(struct i2c_adapter *adapter)
{
+ if (!(adapter->class & I2C_CLASS_HWMON))
+ return 0;
return i2c_probe(adapter, &addr_data, ds1621_detect);
}
/* This function is called by i2c_probe */
-int ds1621_detect(struct i2c_adapter *adapter, int address,
- int kind)
+static int ds1621_detect(struct i2c_adapter *adapter, int address,
+ int kind)
{
int conf, temp;
struct i2c_client *new_client;
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access ds1621_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct ds1621_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct ds1621_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct ds1621_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
/* Fill in remaining client fields and put it into the global list */
strlcpy(new_client->name, "ds1621", I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
struct ds1621_data *data = i2c_get_clientdata(client);
u8 new_conf;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}