V4L/DVB (7848): Fix dependencies for tuner-xc2028 and em28xx-dvb

[linux-2.6] / drivers / gpio / Kconfig

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 560687c4667e9d0abba8db1d21e1c054ca5b5e33..bbd28342e771f415a4b7365653e3383757a398a2 100644 (file)
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -27,6 +27,47 @@ config DEBUG_GPIO
 
 comment "I2C GPIO expanders:"
 
+config GPIO_PCA953X
+       tristate "PCA953x I/O ports"
+       depends on I2C
+       help
+         Say yes here to support the PCA9534 (8-bit), PCA9535 (16-bit),
+         PCA9536 (4-bit), PCA9537 (4-bit), PCA9538 (8-bit), and PCA9539
+         (16-bit) I/O ports. These parts are made by NXP and TI.
+
+         This driver can also be built as a module.  If so, the module
+         will be called pca953x.
+
+config GPIO_PCF857X
+       tristate "PCF857x, PCA857x, and PCA967x I2C GPIO expanders"
+       depends on I2C
+       help
+         Say yes here to provide access to most "quasi-bidirectional" I2C
+         GPIO expanders used for additional digital outputs or inputs.
+         Most of these parts are from NXP, though TI is a second source for
+         some of them.  Compatible models include:
+
+         8 bits:   pcf8574, pcf8574a, pca8574, pca8574a,
+                   pca9670, pca9672, pca9674, pca9674a
+
+         16 bits:  pcf8575, pcf8575c, pca8575,
+                   pca9671, pca9673, pca9675
+
+         Your board setup code will need to declare the expanders in
+         use, and assign numbers to the GPIOs they expose.  Those GPIOs
+         can then be used from drivers and other kernel code, just like
+         other GPIOs, but only accessible from task contexts.
+
+         This driver provides an in-kernel interface to those GPIOs using
+         platform-neutral GPIO calls.
+
 comment "SPI GPIO expanders:"
 
+config GPIO_MCP23S08
+       tristate "Microchip MCP23S08 I/O expander"
+       depends on SPI_MASTER
+       help
+         SPI driver for Microchip MCP23S08 I/O expander.  This provides
+         a GPIO interface supporting inputs and outputs.
+
 endmenu