* Note: E7210 appears same as D82875P - zhenyu.z.wang at intel.com
*/
-
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
-
#include <linux/pci.h>
#include <linux/pci_ids.h>
-
#include <linux/slab.h>
-
#include "edac_mc.h"
+#define I82875P_REVISION " Ver: 2.0.1 " __DATE__
+#define EDAC_MOD_STR "i82875p_edac"
#define i82875p_printk(level, fmt, arg...) \
- edac_printk(level, "i82875p", fmt, ##arg)
-
+ edac_printk(level, "i82875p", fmt, ##arg)
#define i82875p_mc_printk(mci, level, fmt, arg...) \
- edac_mc_chipset_printk(mci, level, "i82875p", fmt, ##arg)
-
+ edac_mc_chipset_printk(mci, level, "i82875p", fmt, ##arg)
#ifndef PCI_DEVICE_ID_INTEL_82875_0
#define PCI_DEVICE_ID_INTEL_82875_0 0x2578
#define PCI_DEVICE_ID_INTEL_82875_6 0x257e
#endif /* PCI_DEVICE_ID_INTEL_82875_6 */
-
/* four csrows in dual channel, eight in single channel */
#define I82875P_NR_CSROWS(nr_chans) (8/(nr_chans))
-
/* Intel 82875p register addresses - device 0 function 0 - DRAM Controller */
#define I82875P_EAP 0x58 /* Error Address Pointer (32b)
*
* 0 reserved
*/
-
/* Intel 82875p register addresses - device 6 function 0 - DRAM Controller */
#define I82875P_PCICMD6 0x04 /* PCI Command Register (16b)
*
* 1:0 DRAM type 01=DDR
*/
-
enum i82875p_chips {
I82875P = 0,
};
-
struct i82875p_pvt {
struct pci_dev *ovrfl_pdev;
void __iomem *ovrfl_window;
};
-
struct i82875p_dev_info {
const char *ctl_name;
};
-
struct i82875p_error_info {
u16 errsts;
u32 eap;
u16 errsts2;
};
-
static const struct i82875p_dev_info i82875p_devs[] = {
[I82875P] = {
- .ctl_name = "i82875p"},
+ .ctl_name = "i82875p"
+ },
};
-static struct pci_dev *mci_pdev = NULL; /* init dev: in case that AGP code
- has already registered driver */
+static struct pci_dev *mci_pdev = NULL; /* init dev: in case that AGP code has
+ * already registered driver
+ */
+
static int i82875p_registered = 1;
-static void i82875p_get_error_info (struct mem_ctl_info *mci,
+static void i82875p_get_error_info(struct mem_ctl_info *mci,
struct i82875p_error_info *info)
{
+ struct pci_dev *pdev;
+
+ pdev = to_pci_dev(mci->dev);
+
/*
* This is a mess because there is no atomic way to read all the
* registers at once and the registers can transition from CE being
* overwritten by UE.
*/
- pci_read_config_word(mci->pdev, I82875P_ERRSTS, &info->errsts);
- pci_read_config_dword(mci->pdev, I82875P_EAP, &info->eap);
- pci_read_config_byte(mci->pdev, I82875P_DES, &info->des);
- pci_read_config_byte(mci->pdev, I82875P_DERRSYN, &info->derrsyn);
- pci_read_config_word(mci->pdev, I82875P_ERRSTS, &info->errsts2);
+ pci_read_config_word(pdev, I82875P_ERRSTS, &info->errsts);
+ pci_read_config_dword(pdev, I82875P_EAP, &info->eap);
+ pci_read_config_byte(pdev, I82875P_DES, &info->des);
+ pci_read_config_byte(pdev, I82875P_DERRSYN, &info->derrsyn);
+ pci_read_config_word(pdev, I82875P_ERRSTS, &info->errsts2);
- pci_write_bits16(mci->pdev, I82875P_ERRSTS, 0x0081, 0x0081);
+ pci_write_bits16(pdev, I82875P_ERRSTS, 0x0081, 0x0081);
/*
* If the error is the same then we can for both reads then
*/
if (!(info->errsts2 & 0x0081))
return;
+
if ((info->errsts ^ info->errsts2) & 0x0081) {
- pci_read_config_dword(mci->pdev, I82875P_EAP, &info->eap);
- pci_read_config_byte(mci->pdev, I82875P_DES, &info->des);
- pci_read_config_byte(mci->pdev, I82875P_DERRSYN,
- &info->derrsyn);
+ pci_read_config_dword(pdev, I82875P_EAP, &info->eap);
+ pci_read_config_byte(pdev, I82875P_DES, &info->des);
+ pci_read_config_byte(pdev, I82875P_DERRSYN,
+ &info->derrsyn);
}
}
-static int i82875p_process_error_info (struct mem_ctl_info *mci,
+static int i82875p_process_error_info(struct mem_ctl_info *mci,
struct i82875p_error_info *info, int handle_errors)
{
int row, multi_chan;
edac_mc_handle_ue(mci, info->eap, 0, row, "i82875p UE");
else
edac_mc_handle_ce(mci, info->eap, 0, info->derrsyn, row,
- multi_chan ? (info->des & 0x1) : 0,
- "i82875p CE");
+ multi_chan ? (info->des & 0x1) : 0,
+ "i82875p CE");
return 1;
}
-
static void i82875p_check(struct mem_ctl_info *mci)
{
struct i82875p_error_info info;
i82875p_process_error_info(mci, &info, 1);
}
-
#ifdef CONFIG_PROC_FS
extern int pci_proc_attach_device(struct pci_dev *);
#endif
-static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
+/* Return 0 on success or 1 on failure. */
+static int i82875p_setup_overfl_dev(struct pci_dev *pdev,
+ struct pci_dev **ovrfl_pdev, void __iomem **ovrfl_window)
{
- int rc = -ENODEV;
- int index;
- struct mem_ctl_info *mci = NULL;
- struct i82875p_pvt *pvt = NULL;
- unsigned long last_cumul_size;
- struct pci_dev *ovrfl_pdev;
- void __iomem *ovrfl_window = NULL;
-
- u32 drc;
- u32 drc_chan; /* Number of channels 0=1chan,1=2chan */
- u32 nr_chans;
- u32 drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */
+ struct pci_dev *dev;
+ void __iomem *window;
- debugf0("%s()\n", __func__);
-
- ovrfl_pdev = pci_find_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);
+ *ovrfl_pdev = NULL;
+ *ovrfl_window = NULL;
+ dev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);
- if (!ovrfl_pdev) {
- /*
- * Intel tells BIOS developers to hide device 6 which
+ if (dev == NULL) {
+ /* Intel tells BIOS developers to hide device 6 which
* configures the overflow device access containing
* the DRBs - this is where we expose device 6.
* http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
*/
pci_write_bits8(pdev, 0xf4, 0x2, 0x2);
- ovrfl_pdev =
- pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0));
- if (!ovrfl_pdev)
- goto fail;
+ dev = pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0));
+
+ if (dev == NULL)
+ return 1;
}
+
+ *ovrfl_pdev = dev;
+
#ifdef CONFIG_PROC_FS
- if (!ovrfl_pdev->procent && pci_proc_attach_device(ovrfl_pdev)) {
- i82875p_printk(KERN_ERR,
- "%s(): Failed to attach overflow device\n",
- __func__);
- goto fail;
+ if ((dev->procent == NULL) && pci_proc_attach_device(dev)) {
+ i82875p_printk(KERN_ERR, "%s(): Failed to attach overflow "
+ "device\n", __func__);
+ return 1;
}
-#endif /* CONFIG_PROC_FS */
- if (pci_enable_device(ovrfl_pdev)) {
- i82875p_printk(KERN_ERR,
- "%s(): Failed to enable overflow device\n",
- __func__);
- goto fail;
+#endif /* CONFIG_PROC_FS */
+ if (pci_enable_device(dev)) {
+ i82875p_printk(KERN_ERR, "%s(): Failed to enable overflow "
+ "device\n", __func__);
+ return 1;
}
- if (pci_request_regions(ovrfl_pdev, pci_name(ovrfl_pdev))) {
+ if (pci_request_regions(dev, pci_name(dev))) {
#ifdef CORRECT_BIOS
- goto fail;
+ goto fail0;
#endif
}
+
/* cache is irrelevant for PCI bus reads/writes */
- ovrfl_window = ioremap_nocache(pci_resource_start(ovrfl_pdev, 0),
- pci_resource_len(ovrfl_pdev, 0));
+ window = ioremap_nocache(pci_resource_start(dev, 0),
+ pci_resource_len(dev, 0));
- if (!ovrfl_window) {
+ if (window == NULL) {
i82875p_printk(KERN_ERR, "%s(): Failed to ioremap bar6\n",
__func__);
- goto fail;
+ goto fail1;
}
- /* need to find out the number of channels */
- drc = readl(ovrfl_window + I82875P_DRC);
- drc_chan = ((drc >> 21) & 0x1);
- nr_chans = drc_chan + 1;
- drc_ddim = (drc >> 18) & 0x1;
-
- mci = edac_mc_alloc(sizeof(*pvt), I82875P_NR_CSROWS(nr_chans),
- nr_chans);
+ *ovrfl_window = window;
+ return 0;
- if (!mci) {
- rc = -ENOMEM;
- goto fail;
- }
+fail1:
+ pci_release_regions(dev);
- debugf3("%s(): init mci\n", __func__);
+#ifdef CORRECT_BIOS
+fail0:
+ pci_disable_device(dev);
+#endif
+ /* NOTE: the ovrfl proc entry and pci_dev are intentionally left */
+ return 1;
+}
- mci->pdev = pdev;
- mci->mtype_cap = MEM_FLAG_DDR;
- mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
- mci->edac_cap = EDAC_FLAG_UNKNOWN;
- /* adjust FLAGS */
+/* Return 1 if dual channel mode is active. Else return 0. */
+static inline int dual_channel_active(u32 drc)
+{
+ return (drc >> 21) & 0x1;
+}
- mci->mod_name = EDAC_MOD_STR;
- mci->mod_ver = "$Revision: 1.5.2.11 $";
- mci->ctl_name = i82875p_devs[dev_idx].ctl_name;
- mci->edac_check = i82875p_check;
- mci->ctl_page_to_phys = NULL;
- debugf3("%s(): init pvt\n", __func__);
+static void i82875p_init_csrows(struct mem_ctl_info *mci,
+ struct pci_dev *pdev, void __iomem *ovrfl_window, u32 drc)
+{
+ struct csrow_info *csrow;
+ unsigned long last_cumul_size;
+ u8 value;
+ u32 drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */
+ u32 cumul_size;
+ int index;
- pvt = (struct i82875p_pvt *) mci->pvt_info;
- pvt->ovrfl_pdev = ovrfl_pdev;
- pvt->ovrfl_window = ovrfl_window;
+ drc_ddim = (drc >> 18) & 0x1;
+ last_cumul_size = 0;
- /*
- * The dram row boundary (DRB) reg values are boundary address
+ /* The dram row boundary (DRB) reg values are boundary address
* for each DRAM row with a granularity of 32 or 64MB (single/dual
* channel operation). DRB regs are cumulative; therefore DRB7 will
* contain the total memory contained in all eight rows.
*/
- for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
- u8 value;
- u32 cumul_size;
- struct csrow_info *csrow = &mci->csrows[index];
+
+ for (index = 0; index < mci->nr_csrows; index++) {
+ csrow = &mci->csrows[index];
value = readb(ovrfl_window + I82875P_DRB + index);
cumul_size = value << (I82875P_DRB_SHIFT - PAGE_SHIFT);
csrow->dtype = DEV_UNKNOWN;
csrow->edac_mode = drc_ddim ? EDAC_SECDED : EDAC_NONE;
}
+}
+
+static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
+{
+ int rc = -ENODEV;
+ struct mem_ctl_info *mci;
+ struct i82875p_pvt *pvt;
+ struct pci_dev *ovrfl_pdev;
+ void __iomem *ovrfl_window;
+ u32 drc;
+ u32 nr_chans;
+ struct i82875p_error_info discard;
+
+ debugf0("%s()\n", __func__);
+ ovrfl_pdev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);
+
+ if (i82875p_setup_overfl_dev(pdev, &ovrfl_pdev, &ovrfl_window))
+ return -ENODEV;
+ drc = readl(ovrfl_window + I82875P_DRC);
+ nr_chans = dual_channel_active(drc) + 1;
+ mci = edac_mc_alloc(sizeof(*pvt), I82875P_NR_CSROWS(nr_chans),
+ nr_chans);
+
+ if (!mci) {
+ rc = -ENOMEM;
+ goto fail0;
+ }
- /* clear counters */
- pci_write_bits16(mci->pdev, I82875P_ERRSTS, 0x0081, 0x0081);
+ debugf3("%s(): init mci\n", __func__);
+ mci->dev = &pdev->dev;
+ mci->mtype_cap = MEM_FLAG_DDR;
+ mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+ mci->edac_cap = EDAC_FLAG_UNKNOWN;
+ mci->mod_name = EDAC_MOD_STR;
+ mci->mod_ver = I82875P_REVISION;
+ mci->ctl_name = i82875p_devs[dev_idx].ctl_name;
+ mci->edac_check = i82875p_check;
+ mci->ctl_page_to_phys = NULL;
+ debugf3("%s(): init pvt\n", __func__);
+ pvt = (struct i82875p_pvt *) mci->pvt_info;
+ pvt->ovrfl_pdev = ovrfl_pdev;
+ pvt->ovrfl_window = ovrfl_window;
+ i82875p_init_csrows(mci, pdev, ovrfl_window, drc);
+ i82875p_get_error_info(mci, &discard); /* clear counters */
- if (edac_mc_add_mc(mci)) {
+ /* Here we assume that we will never see multiple instances of this
+ * type of memory controller. The ID is therefore hardcoded to 0.
+ */
+ if (edac_mc_add_mc(mci,0)) {
debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
- goto fail;
+ goto fail1;
}
/* get this far and it's successful */
debugf3("%s(): success\n", __func__);
return 0;
- fail:
- if (mci)
- edac_mc_free(mci);
+fail1:
+ edac_mc_free(mci);
- if (ovrfl_window)
- iounmap(ovrfl_window);
-
- if (ovrfl_pdev) {
- pci_release_regions(ovrfl_pdev);
- pci_disable_device(ovrfl_pdev);
- }
+fail0:
+ iounmap(ovrfl_window);
+ pci_release_regions(ovrfl_pdev);
+ pci_disable_device(ovrfl_pdev);
/* NOTE: the ovrfl proc entry and pci_dev are intentionally left */
return rc;
}
-
/* returns count (>= 0), or negative on error */
static int __devinit i82875p_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
+ const struct pci_device_id *ent)
{
int rc;
debugf0("%s()\n", __func__);
-
i82875p_printk(KERN_INFO, "i82875p init one\n");
- if(pci_enable_device(pdev) < 0)
+
+ if (pci_enable_device(pdev) < 0)
return -EIO;
+
rc = i82875p_probe1(pdev, ent->driver_data);
+
if (mci_pdev == NULL)
mci_pdev = pci_dev_get(pdev);
+
return rc;
}
-
static void __devexit i82875p_remove_one(struct pci_dev *pdev)
{
struct mem_ctl_info *mci;
debugf0("%s()\n", __func__);
- if ((mci = edac_mc_find_mci_by_pdev(pdev)) == NULL)
+ if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
return;
pvt = (struct i82875p_pvt *) mci->pvt_info;
+
if (pvt->ovrfl_window)
iounmap(pvt->ovrfl_window);
pci_dev_put(pvt->ovrfl_pdev);
}
- if (edac_mc_del_mc(mci))
- return;
-
edac_mc_free(mci);
}
-
static const struct pci_device_id i82875p_pci_tbl[] __devinitdata = {
- {PCI_VEND_DEV(INTEL, 82875_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- I82875P},
- {0,} /* 0 terminated list. */
+ {
+ PCI_VEND_DEV(INTEL, 82875_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ I82875P
+ },
+ {
+ 0,
+ } /* 0 terminated list. */
};
MODULE_DEVICE_TABLE(pci, i82875p_pci_tbl);
-
static struct pci_driver i82875p_driver = {
.name = EDAC_MOD_STR,
.probe = i82875p_init_one,
.id_table = i82875p_pci_tbl,
};
-
static int __init i82875p_init(void)
{
int pci_rc;
debugf3("%s()\n", __func__);
pci_rc = pci_register_driver(&i82875p_driver);
+
if (pci_rc < 0)
- return pci_rc;
+ goto fail0;
+
if (mci_pdev == NULL) {
- i82875p_registered = 0;
- mci_pdev =
- pci_get_device(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_82875_0, NULL);
+ mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_82875_0, NULL);
+
if (!mci_pdev) {
debugf0("875p pci_get_device fail\n");
- return -ENODEV;
+ pci_rc = -ENODEV;
+ goto fail1;
}
+
pci_rc = i82875p_init_one(mci_pdev, i82875p_pci_tbl);
+
if (pci_rc < 0) {
debugf0("875p init fail\n");
- pci_dev_put(mci_pdev);
- return -ENODEV;
+ pci_rc = -ENODEV;
+ goto fail1;
}
}
+
return 0;
-}
+fail1:
+ pci_unregister_driver(&i82875p_driver);
+
+fail0:
+ if (mci_pdev != NULL)
+ pci_dev_put(mci_pdev);
+
+ return pci_rc;
+}
static void __exit i82875p_exit(void)
{
debugf3("%s()\n", __func__);
pci_unregister_driver(&i82875p_driver);
+
if (!i82875p_registered) {
i82875p_remove_one(mci_pdev);
pci_dev_put(mci_pdev);
}
}
-
module_init(i82875p_init);
module_exit(i82875p_exit);
-
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh");
MODULE_DESCRIPTION("MC support for Intel 82875 memory hub controllers");