ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \
ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP)
-#undef RS_EVENT_WRITE_WAKEUP
-#define RS_EVENT_WRITE_WAKEUP 0
-
static struct tty_driver *specialix_driver;
static struct specialix_board sx_board[SX_NBOARD] = {
}
-/* Must be called with enabled interrupts */
-/* Ugly. Very ugly. Don't use this for anything else than initialization
- code */
-static inline void sx_long_delay(unsigned long delay)
-{
- unsigned long i;
-
- for (i = jiffies + delay; time_after(i, jiffies); ) ;
-}
-
-
-
/* Set the IRQ using the RTS lines that run to the PAL on the board.... */
static int sx_set_irq ( struct specialix_board *bp)
{
spin_lock_irqsave(&bp->lock, flags);
sx_out_off(bp, CD186x_CCR, CCR_HARDRESET); /* Reset CD186x chip */
spin_unlock_irqrestore(&bp->lock, flags);
- sx_long_delay(HZ/20); /* Delay 0.05 sec */
+ msleep(50); /* Delay 0.05 sec */
spin_lock_irqsave(&bp->lock, flags);
sx_out_off(bp, CD186x_GIVR, SX_ID); /* Set ID for this chip */
sx_out_off(bp, CD186x_GICR, 0); /* Clear all bits */
if (irq) {
printk (KERN_INFO "Missed interrupt... Calling int from timer. \n");
sx_interrupt (((struct specialix_board *)data)->irq,
- (void*)data, NULL);
+ (void*)data);
}
- missed_irq_timer.expires = jiffies + sx_poll;
- add_timer (&missed_irq_timer);
+ mod_timer(&missed_irq_timer, jiffies + sx_poll);
}
#endif
sx_wait_CCR(bp);
sx_out(bp, CD186x_CCR, CCR_TXEN); /* Enable transmitter */
sx_out(bp, CD186x_IER, IER_TXRDY); /* Enable tx empty intr */
- sx_long_delay(HZ/20);
+ msleep(50);
irqs = probe_irq_off(irqs);
dprintk (SX_DEBUG_INIT, "SRSR = %02x, ", sx_in(bp, CD186x_SRSR));
dprintk (SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR) );
#ifdef SPECIALIX_TIMER
- init_timer (&missed_irq_timer);
- missed_irq_timer.function = missed_irq;
- missed_irq_timer.data = (unsigned long) bp;
- missed_irq_timer.expires = jiffies + sx_poll;
- add_timer (&missed_irq_timer);
+ setup_timer(&missed_irq_timer, missed_irq, (unsigned long)bp);
+ mod_timer(&missed_irq_timer, jiffies + sx_poll);
#endif
printk(KERN_INFO"sx%d: specialix IO8+ board detected at 0x%03x, IRQ %d, CD%d Rev. %c.\n",
* Interrupt processing routines.
* */
-static inline void sx_mark_event(struct specialix_port * port, int event)
-{
- func_enter();
-
- set_bit(event, &port->event);
- schedule_work(&port->tqueue);
-
- func_exit();
-}
-
-
static inline struct specialix_port * sx_get_port(struct specialix_board * bp,
unsigned char const * what)
{
sx_out(bp, CD186x_IER, port->IER);
}
if (port->xmit_cnt <= port->wakeup_chars)
- sx_mark_event(port, RS_EVENT_WRITE_WAKEUP);
+ tty_wakeup(tty);
func_exit();
}
wake_up_interruptible(&port->open_wait);
} else {
dprintk (SX_DEBUG_SIGNALS, "Sending HUP.\n");
- schedule_work(&port->tqueue_hangup);
+ tty_hangup(tty);
}
}
tty->hw_stopped = 0;
port->IER |= IER_TXRDY;
if (port->xmit_cnt <= port->wakeup_chars)
- sx_mark_event(port, RS_EVENT_WRITE_WAKEUP);
+ tty_wakeup(tty);
} else {
tty->hw_stopped = 1;
port->IER &= ~IER_TXRDY;
tty->hw_stopped = 0;
port->IER |= IER_TXRDY;
if (port->xmit_cnt <= port->wakeup_chars)
- sx_mark_event(port, RS_EVENT_WRITE_WAKEUP);
+ tty_wakeup(tty);
} else {
tty->hw_stopped = 1;
port->IER &= ~IER_TXRDY;
tty_ldisc_flush(tty);
spin_lock_irqsave(&port->lock, flags);
tty->closing = 0;
- port->event = 0;
port->tty = NULL;
spin_unlock_irqrestore(&port->lock, flags);
if (port->blocked_open) {
sx_out(bp, CD186x_CAR, port_No(port));
spin_unlock_irqrestore(&bp->lock, flags);
if (I_IXOFF(tty)) {
- spin_unlock_irqrestore(&bp->lock, flags);
sx_wait_CCR(bp);
spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CCR, CCR_SSCH2);
func_exit();
}
-
-/*
- * This routine is called from the work-queue when the interrupt
- * routine has signalled that a hangup has occurred. The path of
- * hangup processing is:
- *
- * serial interrupt routine -> (workqueue) ->
- * do_sx_hangup() -> tty->hangup() -> sx_hangup()
- *
- */
-static void do_sx_hangup(struct work_struct *work)
-{
- struct specialix_port *port =
- container_of(work, struct specialix_port, tqueue_hangup);
- struct tty_struct *tty;
-
- func_enter();
-
- tty = port->tty;
- if (tty)
- tty_hangup(tty); /* FIXME: module removal race here */
-
- func_exit();
-}
-
-
static void sx_hangup(struct tty_struct * tty)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
sx_shutdown_port(bp, port);
spin_lock_irqsave(&port->lock, flags);
- port->event = 0;
bp->count -= port->count;
if (bp->count < 0) {
printk(KERN_ERR "sx%d: sx_hangup: bad board count: %d port: %d\n",
}
}
-
-static void do_softint(struct work_struct *work)
-{
- struct specialix_port *port =
- container_of(work, struct specialix_port, tqueue);
- struct tty_struct *tty;
-
- func_enter();
-
- if(!(tty = port->tty)) {
- func_exit();
- return;
- }
-
- if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &port->event)) {
- tty_wakeup(tty);
- //wake_up_interruptible(&tty->write_wait);
- }
-
- func_exit();
-}
-
static const struct tty_operations sx_ops = {
.open = sx_open,
.close = sx_close,
memset(sx_port, 0, sizeof(sx_port));
for (i = 0; i < SX_NPORT * SX_NBOARD; i++) {
sx_port[i].magic = SPECIALIX_MAGIC;
- INIT_WORK(&sx_port[i].tqueue, do_softint);
- INIT_WORK(&sx_port[i].tqueue_hangup, do_sx_hangup);
sx_port[i].close_delay = 50 * HZ/100;
sx_port[i].closing_wait = 3000 * HZ/100;
init_waitqueue_head(&sx_port[i].open_wait);
if (sx_board[i].flags & SX_BOARD_PRESENT)
sx_release_io_range(&sx_board[i]);
#ifdef SPECIALIX_TIMER
- del_timer (&missed_irq_timer);
+ del_timer_sync(&missed_irq_timer);
#endif
func_exit();
projects / linux-2.6 / blobdiff