#define SX_DEBUG_FIFO 0x0800
-#define func_enter() dprintk (SX_DEBUG_FLOW, "io8: enter %s\n",__FUNCTION__)
-#define func_exit() dprintk (SX_DEBUG_FLOW, "io8: exit %s\n", __FUNCTION__)
+#define func_enter() dprintk (SX_DEBUG_FLOW, "io8: enter %s\n",__func__)
+#define func_exit() dprintk (SX_DEBUG_FLOW, "io8: exit %s\n", __func__)
#define jiffies_from_ms(a) ((((a) * HZ)/1000)+1)
ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \
ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP)
-#undef RS_EVENT_WRITE_WAKEUP
-#define RS_EVENT_WRITE_WAKEUP 0
-
static struct tty_driver *specialix_driver;
static struct specialix_board sx_board[SX_NBOARD] = {
}
-/* Must be called with enabled interrupts */
-/* Ugly. Very ugly. Don't use this for anything else than initialization
- code */
-static inline void sx_long_delay(unsigned long delay)
-{
- unsigned long i;
-
- for (i = jiffies + delay; time_after(i, jiffies); ) ;
-}
-
-
-
/* Set the IRQ using the RTS lines that run to the PAL on the board.... */
static int sx_set_irq ( struct specialix_board *bp)
{
spin_lock_irqsave(&bp->lock, flags);
sx_out_off(bp, CD186x_CCR, CCR_HARDRESET); /* Reset CD186x chip */
spin_unlock_irqrestore(&bp->lock, flags);
- sx_long_delay(HZ/20); /* Delay 0.05 sec */
+ msleep(50); /* Delay 0.05 sec */
spin_lock_irqsave(&bp->lock, flags);
sx_out_off(bp, CD186x_GIVR, SX_ID); /* Set ID for this chip */
sx_out_off(bp, CD186x_GICR, 0); /* Clear all bits */
spin_unlock_irqrestore(&bp->lock, flags);
if (irq) {
printk (KERN_INFO "Missed interrupt... Calling int from timer. \n");
- sx_interrupt (((struct specialix_board *)data)->irq,
- (void*)data);
+ sx_interrupt (-1, bp);
}
mod_timer(&missed_irq_timer, jiffies + sx_poll);
}
sx_wait_CCR(bp);
sx_out(bp, CD186x_CCR, CCR_TXEN); /* Enable transmitter */
sx_out(bp, CD186x_IER, IER_TXRDY); /* Enable tx empty intr */
- sx_long_delay(HZ/20);
+ msleep(50);
irqs = probe_irq_off(irqs);
dprintk (SX_DEBUG_INIT, "SRSR = %02x, ", sx_in(bp, CD186x_SRSR));
* Interrupt processing routines.
* */
-static inline void sx_mark_event(struct specialix_port * port, int event)
-{
- func_enter();
-
- set_bit(event, &port->event);
- schedule_work(&port->tqueue);
-
- func_exit();
-}
-
-
static inline struct specialix_port * sx_get_port(struct specialix_board * bp,
unsigned char const * what)
{
sx_out(bp, CD186x_IER, port->IER);
}
if (port->xmit_cnt <= port->wakeup_chars)
- sx_mark_event(port, RS_EVENT_WRITE_WAKEUP);
+ tty_wakeup(tty);
func_exit();
}
wake_up_interruptible(&port->open_wait);
} else {
dprintk (SX_DEBUG_SIGNALS, "Sending HUP.\n");
- schedule_work(&port->tqueue_hangup);
+ tty_hangup(tty);
}
}
tty->hw_stopped = 0;
port->IER |= IER_TXRDY;
if (port->xmit_cnt <= port->wakeup_chars)
- sx_mark_event(port, RS_EVENT_WRITE_WAKEUP);
+ tty_wakeup(tty);
} else {
tty->hw_stopped = 1;
port->IER &= ~IER_TXRDY;
tty->hw_stopped = 0;
port->IER |= IER_TXRDY;
if (port->xmit_cnt <= port->wakeup_chars)
- sx_mark_event(port, RS_EVENT_WRITE_WAKEUP);
+ tty_wakeup(tty);
} else {
tty->hw_stopped = 1;
port->IER &= ~IER_TXRDY;
/* The main interrupt processing routine */
-static irqreturn_t sx_interrupt(int irq, void *dev_id)
+static irqreturn_t sx_interrupt(int dummy, void *dev_id)
{
unsigned char status;
unsigned char ack;
- struct specialix_board *bp;
+ struct specialix_board *bp = dev_id;
unsigned long loop = 0;
int saved_reg;
unsigned long flags;
func_enter();
- bp = dev_id;
spin_lock_irqsave(&bp->lock, flags);
- dprintk (SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __FUNCTION__, port_No(sx_get_port(bp, "INT")), SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1);
+ dprintk (SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __func__, port_No(sx_get_port(bp, "INT")), SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1);
if (!(bp->flags & SX_BOARD_ACTIVE)) {
- dprintk (SX_DEBUG_IRQ, "sx: False interrupt. irq %d.\n", irq);
+ dprintk (SX_DEBUG_IRQ, "sx: False interrupt. irq %d.\n", bp->irq);
spin_unlock_irqrestore(&bp->lock, flags);
func_exit();
return IRQ_NONE;
return 0;
}
+static void sx_flush_buffer(struct tty_struct *tty)
+{
+ struct specialix_port *port = (struct specialix_port *)tty->driver_data;
+ unsigned long flags;
+ struct specialix_board * bp;
+
+ func_enter();
+
+ if (sx_paranoia_check(port, tty->name, "sx_flush_buffer")) {
+ func_exit();
+ return;
+ }
+
+ bp = port_Board(port);
+ spin_lock_irqsave(&port->lock, flags);
+ port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
+ spin_unlock_irqrestore(&port->lock, flags);
+ tty_wakeup(tty);
+
+ func_exit();
+}
static void sx_close(struct tty_struct * tty, struct file * filp)
{
}
sx_shutdown_port(bp, port);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ sx_flush_buffer(tty);
tty_ldisc_flush(tty);
spin_lock_irqsave(&port->lock, flags);
tty->closing = 0;
- port->event = 0;
port->tty = NULL;
spin_unlock_irqrestore(&port->lock, flags);
if (port->blocked_open) {
}
-static void sx_put_char(struct tty_struct * tty, unsigned char ch)
+static int sx_put_char(struct tty_struct * tty, unsigned char ch)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
unsigned long flags;
if (sx_paranoia_check(port, tty->name, "sx_put_char")) {
func_exit();
- return;
+ return 0;
}
dprintk (SX_DEBUG_TX, "check tty: %p %p\n", tty, port->xmit_buf);
if (!port->xmit_buf) {
func_exit();
- return;
+ return 0;
}
bp = port_Board(port);
spin_lock_irqsave(&port->lock, flags);
spin_unlock_irqrestore(&port->lock, flags);
dprintk (SX_DEBUG_TX, "Exit size\n");
func_exit();
- return;
+ return 0;
}
dprintk (SX_DEBUG_TX, "Handle xmit: %p %p\n", port, port->xmit_buf);
port->xmit_buf[port->xmit_head++] = ch;
spin_unlock_irqrestore(&port->lock, flags);
func_exit();
+ return 1;
}
}
-static void sx_flush_buffer(struct tty_struct *tty)
-{
- struct specialix_port *port = (struct specialix_port *)tty->driver_data;
- unsigned long flags;
- struct specialix_board * bp;
-
- func_enter();
-
- if (sx_paranoia_check(port, tty->name, "sx_flush_buffer")) {
- func_exit();
- return;
- }
-
- bp = port_Board(port);
- spin_lock_irqsave(&port->lock, flags);
- port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
- spin_unlock_irqrestore(&port->lock, flags);
- tty_wakeup(tty);
-
- func_exit();
-}
-
static int sx_tiocmget(struct tty_struct *tty, struct file *file)
{
func_enter();
- if (sx_paranoia_check(port, tty->name, __FUNCTION__)) {
+ if (sx_paranoia_check(port, tty->name, __func__)) {
func_exit();
return -ENODEV;
}
func_enter();
- if (sx_paranoia_check(port, tty->name, __FUNCTION__)) {
+ if (sx_paranoia_check(port, tty->name, __func__)) {
func_exit();
return -ENODEV;
}
int change_speed;
func_enter();
- /*
- if (!access_ok(VERIFY_READ, (void *) newinfo, sizeof(tmp))) {
- func_exit();
- return -EFAULT;
- }
- */
+
if (copy_from_user(&tmp, newinfo, sizeof(tmp))) {
func_enter();
return -EFAULT;
}
-#if 0
- if ((tmp.irq != bp->irq) ||
- (tmp.port != bp->base) ||
- (tmp.type != PORT_CIRRUS) ||
- (tmp.baud_base != (SX_OSCFREQ + CD186x_TPC/2) / CD186x_TPC) ||
- (tmp.custom_divisor != 0) ||
- (tmp.xmit_fifo_size != CD186x_NFIFO) ||
- (tmp.flags & ~SPECIALIX_LEGAL_FLAGS)) {
- func_exit();
- return -EINVAL;
- }
-#endif
+ lock_kernel();
change_speed = ((port->flags & ASYNC_SPD_MASK) !=
(tmp.flags & ASYNC_SPD_MASK));
((tmp.flags & ~ASYNC_USR_MASK) !=
(port->flags & ~ASYNC_USR_MASK))) {
func_exit();
+ unlock_kernel();
return -EPERM;
}
port->flags = ((port->flags & ~ASYNC_USR_MASK) |
sx_change_speed(bp, port);
}
func_exit();
+ unlock_kernel();
return 0;
}
func_enter();
- /*
- if (!access_ok(VERIFY_WRITE, (void *) retinfo, sizeof(tmp)))
- return -EFAULT;
- */
-
memset(&tmp, 0, sizeof(tmp));
+ lock_kernel();
tmp.type = PORT_CIRRUS;
tmp.line = port - sx_port;
tmp.port = bp->base;
tmp.closing_wait = port->closing_wait * HZ/100;
tmp.custom_divisor = port->custom_divisor;
tmp.xmit_fifo_size = CD186x_NFIFO;
+ unlock_kernel();
if (copy_to_user(retinfo, &tmp, sizeof(tmp))) {
func_exit();
return -EFAULT;
sx_send_break(port, arg ? arg*(HZ/10) : HZ/4);
func_exit();
return 0;
- case TIOCGSOFTCAR:
- if (put_user(C_CLOCAL(tty)?1:0, (unsigned long __user *)argp)) {
- func_exit();
- return -EFAULT;
- }
- func_exit();
- return 0;
- case TIOCSSOFTCAR:
- if (get_user(arg, (unsigned long __user *) argp)) {
- func_exit();
- return -EFAULT;
- }
- tty->termios->c_cflag =
- ((tty->termios->c_cflag & ~CLOCAL) |
- (arg ? CLOCAL : 0));
- func_exit();
- return 0;
case TIOCGSERIAL:
func_exit();
return sx_get_serial_info(port, argp);
sx_out(bp, CD186x_CAR, port_No(port));
spin_unlock_irqrestore(&bp->lock, flags);
if (I_IXOFF(tty)) {
- spin_unlock_irqrestore(&bp->lock, flags);
sx_wait_CCR(bp);
spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CCR, CCR_SSCH2);
func_exit();
}
-
-/*
- * This routine is called from the work-queue when the interrupt
- * routine has signalled that a hangup has occurred. The path of
- * hangup processing is:
- *
- * serial interrupt routine -> (workqueue) ->
- * do_sx_hangup() -> tty->hangup() -> sx_hangup()
- *
- */
-static void do_sx_hangup(struct work_struct *work)
-{
- struct specialix_port *port =
- container_of(work, struct specialix_port, tqueue_hangup);
- struct tty_struct *tty;
-
- func_enter();
-
- tty = port->tty;
- if (tty)
- tty_hangup(tty); /* FIXME: module removal race here */
-
- func_exit();
-}
-
-
static void sx_hangup(struct tty_struct * tty)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
sx_shutdown_port(bp, port);
spin_lock_irqsave(&port->lock, flags);
- port->event = 0;
bp->count -= port->count;
if (bp->count < 0) {
printk(KERN_ERR "sx%d: sx_hangup: bad board count: %d port: %d\n",
}
}
-
-static void do_softint(struct work_struct *work)
-{
- struct specialix_port *port =
- container_of(work, struct specialix_port, tqueue);
- struct tty_struct *tty;
-
- func_enter();
-
- if(!(tty = port->tty)) {
- func_exit();
- return;
- }
-
- if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &port->event))
- tty_wakeup(tty);
-
- func_exit();
-}
-
static const struct tty_operations sx_ops = {
.open = sx_open,
.close = sx_close,
memset(sx_port, 0, sizeof(sx_port));
for (i = 0; i < SX_NPORT * SX_NBOARD; i++) {
sx_port[i].magic = SPECIALIX_MAGIC;
- INIT_WORK(&sx_port[i].tqueue, do_softint);
- INIT_WORK(&sx_port[i].tqueue_hangup, do_sx_hangup);
sx_port[i].close_delay = 50 * HZ/100;
sx_port[i].closing_wait = 3000 * HZ/100;
init_waitqueue_head(&sx_port[i].open_wait);