Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com> */
-#include <linux/config.h>
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/module.h>
#include <linux/scx200_gpio.h>
#include <linux/nsc_gpio.h>
-#define NAME "scx200_gpio"
-#define DEVNAME NAME
+#define DRVNAME "scx200_gpio"
static struct platform_device *pdev;
MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>");
-MODULE_DESCRIPTION("NatSemi SCx200 GPIO Pin Driver");
+MODULE_DESCRIPTION("NatSemi/AMD SCx200 GPIO Pin Driver");
MODULE_LICENSE("GPL");
static int major = 0; /* default to dynamic major */
module_param(major, int, 0);
MODULE_PARM_DESC(major, "Major device number");
-extern void scx200_gpio_dump(unsigned index);
+#define MAX_PINS 32 /* 64 later, when known ok */
-struct nsc_gpio_ops scx200_access = {
+struct nsc_gpio_ops scx200_gpio_ops = {
.owner = THIS_MODULE,
.gpio_config = scx200_gpio_configure,
- .gpio_dump = scx200_gpio_dump,
+ .gpio_dump = nsc_gpio_dump,
.gpio_get = scx200_gpio_get,
.gpio_set = scx200_gpio_set,
- .gpio_set_high = scx200_gpio_set_high,
- .gpio_set_low = scx200_gpio_set_low,
.gpio_change = scx200_gpio_change,
.gpio_current = scx200_gpio_current
};
-
-static ssize_t scx200_gpio_write(struct file *file, const char __user *data,
- size_t len, loff_t *ppos)
-{
- unsigned m = iminor(file->f_dentry->d_inode);
- size_t i;
- int err = 0;
-
- for (i = 0; i < len; ++i) {
- char c;
- if (get_user(c, data + i))
- return -EFAULT;
- switch (c) {
- case '0':
- scx200_gpio_set(m, 0);
- break;
- case '1':
- scx200_gpio_set(m, 1);
- break;
- case 'O':
- printk(KERN_INFO NAME ": GPIO%d output enabled\n", m);
- scx200_gpio_configure(m, ~1, 1);
- break;
- case 'o':
- printk(KERN_INFO NAME ": GPIO%d output disabled\n", m);
- scx200_gpio_configure(m, ~1, 0);
- break;
- case 'T':
- printk(KERN_INFO NAME ": GPIO%d output is push pull\n", m);
- scx200_gpio_configure(m, ~2, 2);
- break;
- case 't':
- printk(KERN_INFO NAME ": GPIO%d output is open drain\n", m);
- scx200_gpio_configure(m, ~2, 0);
- break;
- case 'P':
- printk(KERN_INFO NAME ": GPIO%d pull up enabled\n", m);
- scx200_gpio_configure(m, ~4, 4);
- break;
- case 'p':
- printk(KERN_INFO NAME ": GPIO%d pull up disabled\n", m);
- scx200_gpio_configure(m, ~4, 0);
- break;
-
- case 'v':
- /* View Current pin settings */
- scx200_gpio_dump(m);
- break;
- case '\n':
- /* end of settings string, do nothing */
- break;
- default:
- printk(KERN_ERR NAME
- ": GPIO-%2d bad setting: chr<0x%2x>\n", m,
- (int)c);
- err++;
- }
- }
- if (err)
- return -EINVAL; /* full string handled, report error */
-
- return len;
-}
-
-static ssize_t scx200_gpio_read(struct file *file, char __user *buf,
- size_t len, loff_t *ppos)
-{
- unsigned m = iminor(file->f_dentry->d_inode);
- int value;
-
- value = scx200_gpio_get(m);
- if (put_user(value ? '1' : '0', buf))
- return -EFAULT;
-
- return 1;
-}
+EXPORT_SYMBOL_GPL(scx200_gpio_ops);
static int scx200_gpio_open(struct inode *inode, struct file *file)
{
unsigned m = iminor(inode);
- if (m > 63)
+ file->private_data = &scx200_gpio_ops;
+
+ if (m >= MAX_PINS)
return -EINVAL;
return nonseekable_open(inode, file);
}
return 0;
}
-
-static struct file_operations scx200_gpio_fops = {
+static const struct file_operations scx200_gpio_fileops = {
.owner = THIS_MODULE,
- .write = scx200_gpio_write,
- .read = scx200_gpio_read,
+ .write = nsc_gpio_write,
+ .read = nsc_gpio_read,
.open = scx200_gpio_open,
.release = scx200_gpio_release,
};
-struct cdev *scx200_devices;
-static int num_pins = 32;
+static struct cdev scx200_gpio_cdev; /* use 1 cdev for all pins */
static int __init scx200_gpio_init(void)
{
- int rc, i;
- dev_t dev = MKDEV(major, 0);
+ int rc;
+ dev_t devid;
if (!scx200_gpio_present()) {
- printk(KERN_ERR NAME ": no SCx200 gpio present\n");
+ printk(KERN_ERR DRVNAME ": no SCx200 gpio present\n");
return -ENODEV;
}
/* support dev_dbg() with pdev->dev */
- pdev = platform_device_alloc(DEVNAME, 0);
+ pdev = platform_device_alloc(DRVNAME, 0);
if (!pdev)
return -ENOMEM;
if (rc)
goto undo_malloc;
- if (major)
- rc = register_chrdev_region(dev, num_pins, "scx200_gpio");
- else {
- rc = alloc_chrdev_region(&dev, 0, num_pins, "scx200_gpio");
- major = MAJOR(dev);
+ /* nsc_gpio uses dev_dbg(), so needs this */
+ scx200_gpio_ops.dev = &pdev->dev;
+
+ if (major) {
+ devid = MKDEV(major, 0);
+ rc = register_chrdev_region(devid, MAX_PINS, "scx200_gpio");
+ } else {
+ rc = alloc_chrdev_region(&devid, 0, MAX_PINS, "scx200_gpio");
+ major = MAJOR(devid);
}
if (rc < 0) {
dev_err(&pdev->dev, "SCx200 chrdev_region err: %d\n", rc);
goto undo_platform_device_add;
}
- scx200_devices = kzalloc(num_pins * sizeof(struct cdev), GFP_KERNEL);
- if (!scx200_devices) {
- rc = -ENOMEM;
- goto undo_chrdev_region;
- }
- for (i = 0; i < num_pins; i++) {
- struct cdev *cdev = &scx200_devices[i];
- cdev_init(cdev, &scx200_gpio_fops);
- cdev->owner = THIS_MODULE;
- rc = cdev_add(cdev, MKDEV(major, i), 1);
- /* tolerate 'minor' errors */
- if (rc)
- dev_err(&pdev->dev, "Error %d on minor %d", rc, i);
- }
+
+ cdev_init(&scx200_gpio_cdev, &scx200_gpio_fileops);
+ cdev_add(&scx200_gpio_cdev, devid, MAX_PINS);
return 0; /* succeed */
-undo_chrdev_region:
- unregister_chrdev_region(dev, num_pins);
undo_platform_device_add:
- platform_device_put(pdev);
+ platform_device_del(pdev);
undo_malloc:
- kfree(pdev);
+ platform_device_put(pdev);
+
return rc;
}
static void __exit scx200_gpio_cleanup(void)
{
- kfree(scx200_devices);
- unregister_chrdev_region(MKDEV(major, 0), num_pins);
- platform_device_put(pdev);
+ cdev_del(&scx200_gpio_cdev);
+ /* cdev_put(&scx200_gpio_cdev); */
+
+ unregister_chrdev_region(MKDEV(major, 0), MAX_PINS);
platform_device_unregister(pdev);
- /* kfree(pdev); */
}
module_init(scx200_gpio_init);