* nozomi.c -- HSDPA driver Broadband Wireless Data Card - Globe Trotter
*
* Written by: Ulf Jakobsson,
- * Jan �erfeldt,
+ * Jan Åkerfeldt,
* Stefan Thomasson,
*
* Maintained by: Paul Hardwick (p.hardwick@option.com)
* --------------------------------------------------------------------------
*/
-/*
- * CHANGELOG
- * Version 2.1d
- * 11-November-2007 Jiri Slaby, Frank Seidel
- * - Big rework of multicard support by Jiri
- * - Major cleanups (semaphore to mutex, endianess, no major reservation)
- * - Optimizations
- *
- * Version 2.1c
- * 30-October-2007 Frank Seidel
- * - Completed multicard support
- * - Minor cleanups
- *
- * Version 2.1b
- * 07-August-2007 Frank Seidel
- * - Minor cleanups
- * - theoretical multicard support
- *
- * Version 2.1
- * 03-July-2006 Paul Hardwick
- *
- * - Stability Improvements. Incorporated spinlock wraps patch.
- * - Updated for newer 2.6.14+ kernels (tty_buffer_request_room)
- * - using __devexit macro for tty
- *
- *
- * Version 2.0
- * 08-feb-2006 15:34:10:Ulf
- *
- * -Fixed issue when not waking up line disipine layer, could probably result
- * in better uplink performance for 2.4.
- *
- * -Fixed issue with big endian during initalization, now proper toggle flags
- * are handled between preloader and maincode.
- *
- * -Fixed flow control issue.
- *
- * -Added support for setting DTR.
- *
- * -For 2.4 kernels, removing temporary buffer that's not needed.
- *
- * -Reading CTS only for modem port (only port that supports it).
- *
- * -Return 0 in write_room instead of netative value, it's not handled in
- * upper layer.
- *
- * --------------------------------------------------------------------------
- * Version 1.0
- *
- * First version of driver, only tested with card of type F32_2.
- * Works fine with 2.4 and 2.6 kernels.
- * Driver also support big endian architecture.
- */
-
/* Enable this to have a lot of debug printouts */
#define DEBUG
/* Do we need this settable at runtime? */
static int debug = NOZOMI_DEBUG_LEVEL;
-#define D(lvl, args...) do {if (lvl & debug) NFO(KERN_DEBUG, ##args); } \
- while (0)
+#define D(lvl, args...) do \
+ {if (lvl & debug) NFO(KERN_DEBUG, ##args); } \
+ while (0)
#define D_(lvl, args...) D(lvl, ##args)
/* These printouts are always printed */
/* Big endian */
struct toggles {
- unsigned enabled:5; /*
+ unsigned int enabled:5; /*
* Toggle fields are valid if enabled is 0,
* else A-channels must always be used.
*/
- unsigned diag_dl:1;
- unsigned mdm_dl:1;
- unsigned mdm_ul:1;
+ unsigned int diag_dl:1;
+ unsigned int mdm_dl:1;
+ unsigned int mdm_ul:1;
} __attribute__ ((packed));
/* Configuration table to read at startup of card */
/* This stores all control downlink flags */
struct ctrl_dl {
u8 port;
- unsigned reserved:4;
- unsigned CTS:1;
- unsigned RI:1;
- unsigned DCD:1;
- unsigned DSR:1;
+ unsigned int reserved:4;
+ unsigned int CTS:1;
+ unsigned int RI:1;
+ unsigned int DCD:1;
+ unsigned int DSR:1;
} __attribute__ ((packed));
/* This stores all control uplink flags */
struct ctrl_ul {
u8 port;
- unsigned reserved:6;
- unsigned RTS:1;
- unsigned DTR:1;
+ unsigned int reserved:6;
+ unsigned int RTS:1;
+ unsigned int DTR:1;
} __attribute__ ((packed));
#else
/* This represents the toggle information */
struct toggles {
- unsigned mdm_ul:1;
- unsigned mdm_dl:1;
- unsigned diag_dl:1;
- unsigned enabled:5; /*
+ unsigned int mdm_ul:1;
+ unsigned int mdm_dl:1;
+ unsigned int diag_dl:1;
+ unsigned int enabled:5; /*
* Toggle fields are valid if enabled is 0,
* else A-channels must always be used.
*/
/* This stores all control downlink flags */
struct ctrl_dl {
- unsigned DSR:1;
- unsigned DCD:1;
- unsigned RI:1;
- unsigned CTS:1;
- unsigned reserverd:4;
+ unsigned int DSR:1;
+ unsigned int DCD:1;
+ unsigned int RI:1;
+ unsigned int CTS:1;
+ unsigned int reserverd:4;
u8 port;
} __attribute__ ((packed));
/* This stores all control uplink flags */
struct ctrl_ul {
- unsigned DTR:1;
- unsigned RTS:1;
- unsigned reserved:6;
+ unsigned int DTR:1;
+ unsigned int RTS:1;
+ unsigned int reserved:6;
u8 port;
} __attribute__ ((packed));
#endif
} __attribute__ ((packed));
/* Global variables */
-static struct pci_device_id nozomi_pci_tbl[] = {
+static const struct pci_device_id nozomi_pci_tbl[] __devinitconst = {
{PCI_DEVICE(VENDOR1, DEVICE1)},
{},
};
* -Optimize
* -Rewrite cleaner
*/
-static u32 write_mem32(void __iomem *mem_addr_start, u32 *buf,
+static u32 write_mem32(void __iomem *mem_addr_start, const u32 *buf,
u32 size_bytes)
{
u32 i = 0;
u32 *ptr = (__force u32 *) mem_addr_start;
- u16 *buf16;
+ const u16 *buf16;
if (unlikely(!ptr || !buf))
return 0;
/* shortcut for extremely often used cases */
switch (size_bytes) {
case 2: /* 2 bytes */
- buf16 = (u16 *) buf;
+ buf16 = (const u16 *)buf;
writew(__cpu_to_le16(*buf16), (void __iomem *)ptr);
return 2;
break;
while (i < size_bytes) {
if (size_bytes - i == 2) {
/* 2 bytes */
- buf16 = (u16 *) buf;
+ buf16 = (const u16 *)buf;
writew(__cpu_to_le16(*buf16), (void __iomem *)ptr);
i += 2;
} else {
dc->config_table.ul_ctrl_len);
}
#else
-static __inline__ void dump_table(const struct nozomi *dc) { }
+static inline void dump_table(const struct nozomi *dc) { }
#endif
/*
/* Enable uplink interrupts */
static void enable_transmit_ul(enum port_type port, struct nozomi *dc)
{
- u16 mask[NOZOMI_MAX_PORTS] = \
- {MDM_UL, DIAG_UL, APP1_UL, APP2_UL, CTRL_UL};
+ static const u16 mask[] = {MDM_UL, DIAG_UL, APP1_UL, APP2_UL, CTRL_UL};
if (port < NOZOMI_MAX_PORTS) {
dc->last_ier |= mask[port];
/* Disable uplink interrupts */
static void disable_transmit_ul(enum port_type port, struct nozomi *dc)
{
- u16 mask[NOZOMI_MAX_PORTS] = \
- {~MDM_UL, ~DIAG_UL, ~APP1_UL, ~APP2_UL, ~CTRL_UL};
+ static const u16 mask[] =
+ {~MDM_UL, ~DIAG_UL, ~APP1_UL, ~APP2_UL, ~CTRL_UL};
if (port < NOZOMI_MAX_PORTS) {
dc->last_ier &= mask[port];
/* Enable downlink interrupts */
static void enable_transmit_dl(enum port_type port, struct nozomi *dc)
{
- u16 mask[NOZOMI_MAX_PORTS] = \
- {MDM_DL, DIAG_DL, APP1_DL, APP2_DL, CTRL_DL};
+ static const u16 mask[] = {MDM_DL, DIAG_DL, APP1_DL, APP2_DL, CTRL_DL};
if (port < NOZOMI_MAX_PORTS) {
dc->last_ier |= mask[port];
/* Disable downlink interrupts */
static void disable_transmit_dl(enum port_type port, struct nozomi *dc)
{
- u16 mask[NOZOMI_MAX_PORTS] = \
- {~MDM_DL, ~DIAG_DL, ~APP1_DL, ~APP2_DL, ~CTRL_DL};
+ static const u16 mask[] =
+ {~MDM_DL, ~DIAG_DL, ~APP1_DL, ~APP2_DL, ~CTRL_DL};
if (port < NOZOMI_MAX_PORTS) {
dc->last_ier &= mask[port];
* Return 1 - send buffer to card and ack.
* Return 0 - don't ack, don't send buffer to card.
*/
-static int send_data(enum port_type index, struct nozomi *dc)
+static int send_data(enum port_type index, const struct nozomi *dc)
{
u32 size = 0;
- struct port *port = &dc->port[index];
- u8 toggle = port->toggle_ul;
+ const struct port *port = &dc->port[index];
+ const u8 toggle = port->toggle_ul;
void __iomem *addr = port->ul_addr[toggle];
- u32 ul_size = port->ul_size[toggle];
+ const u32 ul_size = port->ul_size[toggle];
struct tty_struct *tty = port->tty;
/* Get data from tty and place in buf for now */
}
/*
- * Handle donlink data, ports that are handled are modem and diagnostics
+ * Handle downlink data, ports that are handled are modem and diagnostics
* Return 1 - ok
* Return 0 - toggle fields are out of sync
*/
static ssize_t card_type_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev));
+ const struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev));
return sprintf(buf, "%d\n", dc->card_type);
}
-static DEVICE_ATTR(card_type, 0444, card_type_show, NULL);
+static DEVICE_ATTR(card_type, S_IRUGO, card_type_show, NULL);
static ssize_t open_ttys_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev));
+ const struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev));
return sprintf(buf, "%u\n", dc->open_ttys);
}
-static DEVICE_ATTR(open_ttys, 0444, open_ttys_show, NULL);
+static DEVICE_ATTR(open_ttys, S_IRUGO, open_ttys_show, NULL);
static void make_sysfs_files(struct nozomi *dc)
{
{
struct port *port = tty->driver_data;
int room = 0;
- struct nozomi *dc = get_dc_by_tty(tty);
+ const struct nozomi *dc = get_dc_by_tty(tty);
if (!dc || !port)
return 0;
/* Gets io control parameters */
static int ntty_tiocmget(struct tty_struct *tty, struct file *file)
{
- struct port *port = tty->driver_data;
- struct ctrl_dl *ctrl_dl = &port->ctrl_dl;
- struct ctrl_ul *ctrl_ul = &port->ctrl_ul;
+ const struct port *port = tty->driver_data;
+ const struct ctrl_dl *ctrl_dl = &port->ctrl_dl;
+ const struct ctrl_ul *ctrl_ul = &port->ctrl_ul;
return (ctrl_ul->RTS ? TIOCM_RTS : 0) |
(ctrl_ul->DTR ? TIOCM_DTR : 0) |
static int ntty_cflags_changed(struct port *port, unsigned long flags,
struct async_icount *cprev)
{
- struct async_icount cnow = port->tty_icount;
+ const struct async_icount cnow = port->tty_icount;
int ret;
ret = ((flags & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
static int ntty_ioctl_tiocgicount(struct port *port, void __user *argp)
{
- struct async_icount cnow = port->tty_icount;
+ const struct async_icount cnow = port->tty_icount;
struct serial_icounter_struct icount;
icount.cts = cnow.cts;
/* just to discard single character writes */
static void ntty_put_char(struct tty_struct *tty, unsigned char c)
{
- /* FIXME !!! */
+ /*
+ * card does not react correct when we write single chars
+ * to the card, so we discard them
+ */
DBG2("PUT CHAR Function: %c", c);
}
return rval;
}
-static struct tty_operations tty_ops = {
+static const struct tty_operations tty_ops = {
.ioctl = ntty_ioctl,
.open = ntty_open,
.close = ntty_close,
projects / linux-2.6 / blobdiff