*
* Revision 1.36.3.8 1996/06/07 16:29:00 bentson
* starting minor number at zero; added missing verify_area
- * as noted by Heiko Eissfeldt <heiko@colossus.escape.de>
+ * as noted by Heiko Eißfeldt <heiko@colossus.escape.de>
*
* Revision 1.36.3.7 1996/04/19 21:06:18 bentson
* remove unneeded boot message & fix CLOCAL hardware flow
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/bitops.h>
+#include <linux/firmware.h>
#include <asm/system.h>
#include <asm/io.h>
static void cy_throttle(struct tty_struct *tty);
static void cy_send_xchar(struct tty_struct *tty, char ch);
-#define IS_CYC_Z(card) ((card).num_chips == -1)
+#define IS_CYC_Z(card) ((card).num_chips == (unsigned int)-1)
#define Z_FPGA_CHECK(card) \
((readl(&((struct RUNTIME_9060 __iomem *) \
#define STD_COM_FLAGS (0)
+/* firmware stuff */
+#define ZL_MAX_BLOCKS 16
+#define DRIVER_VERSION 0x02010203
+#define RAM_SIZE 0x80000
+
+#define Z_FPGA_LOADED(X) ((readl(&(X)->init_ctrl) & (1<<17)) != 0)
+
+enum zblock_type {
+ ZBLOCK_PRG = 0,
+ ZBLOCK_FPGA = 1
+};
+
+struct zfile_header {
+ char name[64];
+ char date[32];
+ char aux[32];
+ u32 n_config;
+ u32 config_offset;
+ u32 n_blocks;
+ u32 block_offset;
+ u32 reserved[9];
+} __attribute__ ((packed));
+
+struct zfile_config {
+ char name[64];
+ u32 mailbox;
+ u32 function;
+ u32 n_blocks;
+ u32 block_list[ZL_MAX_BLOCKS];
+} __attribute__ ((packed));
+
+struct zfile_block {
+ u32 type;
+ u32 file_offset;
+ u32 ram_offset;
+ u32 size;
+} __attribute__ ((packed));
+
static struct tty_driver *cy_serial_driver;
#ifdef CONFIG_ISA
driver to probe addresses at a different address, add it to
this table. If the driver is probing some other board and
causing problems, remove the offending address from this table.
- The cy_setup function extracts additional addresses from the
- boot options line. The form is "cyclades=address,address..."
*/
static unsigned int cy_isa_addresses[] = {
return 0;
} /* serial_paranoia_check */
-/*
- * This routine is used by the interrupt handler to schedule
- * processing in the software interrupt portion of the driver
- * (also known as the "bottom half"). This can be called any
- * number of times for any channel without harm.
- */
-static inline void cy_sched_event(struct cyclades_port *info, int event)
-{
- info->event |= 1 << event; /* remember what kind of event and who */
- schedule_work(&info->tqueue);
-} /* cy_sched_event */
-
-/*
- * This routine is used to handle the "bottom half" processing for the
- * serial driver, known also the "software interrupt" processing.
- * This processing is done at the kernel interrupt level, after the
- * cy#/_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This
- * is where time-consuming activities which can not be done in the
- * interrupt driver proper are done; the interrupt driver schedules
- * them using cy_sched_event(), and they get done here.
- *
- * This is done through one level of indirection--the task queue.
- * When a hardware interrupt service routine wants service by the
- * driver's bottom half, it enqueues the appropriate tq_struct (one
- * per port) to the keventd work queue and sets a request flag
- * that the work queue be processed.
- *
- * Although this may seem unwieldy, it gives the system a way to
- * pass an argument (in this case the pointer to the cyclades_port
- * structure) to the bottom half of the driver. Previous kernels
- * had to poll every port to see if that port needed servicing.
- */
-static void
-do_softint(struct work_struct *work)
-{
- struct cyclades_port *info =
- container_of(work, struct cyclades_port, tqueue);
- struct tty_struct *tty;
-
- tty = info->tty;
- if (!tty)
- return;
-
- if (test_and_clear_bit(Cy_EVENT_HANGUP, &info->event)) {
- tty_hangup(info->tty);
- wake_up_interruptible(&info->open_wait);
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
- }
- if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event))
- wake_up_interruptible(&info->open_wait);
-#ifdef CONFIG_CYZ_INTR
- if (test_and_clear_bit(Cy_EVENT_Z_RX_FULL, &info->event) &&
- !timer_pending(&cyz_rx_full_timer[info->line]))
- mod_timer(&cyz_rx_full_timer[info->line], jiffies + 1);
-#endif
- if (test_and_clear_bit(Cy_EVENT_DELTA_WAKEUP, &info->event))
- wake_up_interruptible(&info->delta_msr_wait);
- tty_wakeup(tty);
-#ifdef Z_WAKE
- if (test_and_clear_bit(Cy_EVENT_SHUTDOWN_WAKEUP, &info->event))
- complete(&info->shutdown_wait);
-#endif
-} /* do_softint */
-
-
/***********************************************************/
/********* Start of block of Cyclom-Y specific code ********/
}
#endif /* CONFIG_ISA */
-static void cyy_intr_chip(struct cyclades_card *cinfo, int chip,
- void __iomem * base_addr, int status, int index)
+static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
+ void __iomem *base_addr)
{
struct cyclades_port *info;
struct tty_struct *tty;
- int char_count;
- int j, len, mdm_change, mdm_status, outch;
- int save_xir, channel, save_car;
- char data;
+ int len, index = cinfo->bus_index;
+ u8 save_xir, channel, save_car, data, char_count;
- if (status & CySRReceive) { /* reception interrupt */
#ifdef CY_DEBUG_INTERRUPTS
- printk(KERN_DEBUG "cyy_interrupt: rcvd intr, chip %d\n", chip);
+ printk(KERN_DEBUG "cyy_interrupt: rcvd intr, chip %d\n", chip);
#endif
- /* determine the channel & change to that context */
- spin_lock(&cinfo->card_lock);
- save_xir = (u_char) readb(base_addr + (CyRIR << index));
- channel = (u_short) (save_xir & CyIRChannel);
- info = &cinfo->ports[channel + chip * 4];
- save_car = readb(base_addr + (CyCAR << index));
- cy_writeb(base_addr + (CyCAR << index), save_xir);
-
- /* if there is nowhere to put the data, discard it */
- if (info->tty == NULL) {
- j = (readb(base_addr + (CyRIVR << index)) &
- CyIVRMask);
- if (j == CyIVRRxEx) { /* exception */
+ /* determine the channel & change to that context */
+ save_xir = readb(base_addr + (CyRIR << index));
+ channel = save_xir & CyIRChannel;
+ info = &cinfo->ports[channel + chip * 4];
+ save_car = readb(base_addr + (CyCAR << index));
+ cy_writeb(base_addr + (CyCAR << index), save_xir);
+
+ /* if there is nowhere to put the data, discard it */
+ if (info->tty == NULL) {
+ if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
+ CyIVRRxEx) { /* exception */
+ data = readb(base_addr + (CyRDSR << index));
+ } else { /* normal character reception */
+ char_count = readb(base_addr + (CyRDCR << index));
+ while (char_count--)
data = readb(base_addr + (CyRDSR << index));
- } else { /* normal character reception */
- char_count = readb(base_addr +
- (CyRDCR << index));
- while (char_count--) {
- data = readb(base_addr +
- (CyRDSR << index));
- }
- }
- } else { /* there is an open port for this data */
- tty = info->tty;
- j = (readb(base_addr + (CyRIVR << index)) &
- CyIVRMask);
- if (j == CyIVRRxEx) { /* exception */
- data = readb(base_addr + (CyRDSR << index));
-
- /* For statistics only */
- if (data & CyBREAK)
- info->icount.brk++;
- else if (data & CyFRAME)
- info->icount.frame++;
- else if (data & CyPARITY)
- info->icount.parity++;
- else if (data & CyOVERRUN)
- info->icount.overrun++;
-
- if (data & info->ignore_status_mask) {
+ }
+ goto end;
+ }
+ /* there is an open port for this data */
+ tty = info->tty;
+ if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
+ CyIVRRxEx) { /* exception */
+ data = readb(base_addr + (CyRDSR << index));
+
+ /* For statistics only */
+ if (data & CyBREAK)
+ info->icount.brk++;
+ else if (data & CyFRAME)
+ info->icount.frame++;
+ else if (data & CyPARITY)
+ info->icount.parity++;
+ else if (data & CyOVERRUN)
+ info->icount.overrun++;
+
+ if (data & info->ignore_status_mask) {
+ info->icount.rx++;
+ return;
+ }
+ if (tty_buffer_request_room(tty, 1)) {
+ if (data & info->read_status_mask) {
+ if (data & CyBREAK) {
+ tty_insert_flip_char(tty,
+ readb(base_addr + (CyRDSR <<
+ index)), TTY_BREAK);
+ info->icount.rx++;
+ if (info->flags & ASYNC_SAK)
+ do_SAK(tty);
+ } else if (data & CyFRAME) {
+ tty_insert_flip_char( tty,
+ readb(base_addr + (CyRDSR <<
+ index)), TTY_FRAME);
+ info->icount.rx++;
+ info->idle_stats.frame_errs++;
+ } else if (data & CyPARITY) {
+ /* Pieces of seven... */
+ tty_insert_flip_char(tty,
+ readb(base_addr + (CyRDSR <<
+ index)), TTY_PARITY);
+ info->icount.rx++;
+ info->idle_stats.parity_errs++;
+ } else if (data & CyOVERRUN) {
+ tty_insert_flip_char(tty, 0,
+ TTY_OVERRUN);
+ info->icount.rx++;
+ /* If the flip buffer itself is
+ overflowing, we still lose
+ the next incoming character.
+ */
+ tty_insert_flip_char(tty,
+ readb(base_addr + (CyRDSR <<
+ index)), TTY_FRAME);
info->icount.rx++;
- spin_unlock(&cinfo->card_lock);
- return;
- }
- if (tty_buffer_request_room(tty, 1)) {
- if (data & info->read_status_mask) {
- if (data & CyBREAK) {
- tty_insert_flip_char(
- tty,
- readb(
- base_addr +
- (CyRDSR <<
- index)),
- TTY_BREAK);
- info->icount.rx++;
- if (info->flags &
- ASYNC_SAK) {
- do_SAK(tty);
- }
- } else if (data & CyFRAME) {
- tty_insert_flip_char(
- tty,
- readb(
- base_addr +
- (CyRDSR <<
- index)),
- TTY_FRAME);
- info->icount.rx++;
- info->idle_stats.
- frame_errs++;
- } else if (data & CyPARITY) {
- /* Pieces of seven... */
- tty_insert_flip_char(
- tty,
- readb(
- base_addr +
- (CyRDSR <<
- index)),
- TTY_PARITY);
- info->icount.rx++;
- info->idle_stats.
- parity_errs++;
- } else if (data & CyOVERRUN) {
- tty_insert_flip_char(
- tty, 0,
- TTY_OVERRUN);
- info->icount.rx++;
- /* If the flip buffer itself is
- overflowing, we still lose
- the next incoming character.
- */
- tty_insert_flip_char(
- tty,
- readb(
- base_addr +
- (CyRDSR <<
- index)),
- TTY_FRAME);
- info->icount.rx++;
- info->idle_stats.
- overruns++;
- /* These two conditions may imply */
- /* a normal read should be done. */
- /* }else if(data & CyTIMEOUT){ */
- /* }else if(data & CySPECHAR){ */
- } else {
- tty_insert_flip_char(
- tty, 0,
- TTY_NORMAL);
- info->icount.rx++;
- }
- } else {
- tty_insert_flip_char(tty, 0,
- TTY_NORMAL);
- info->icount.rx++;
- }
- } else {
- /* there was a software buffer
- overrun and nothing could be
- done about it!!! */
- info->icount.buf_overrun++;
info->idle_stats.overruns++;
+ /* These two conditions may imply */
+ /* a normal read should be done. */
+ /* } else if(data & CyTIMEOUT) { */
+ /* } else if(data & CySPECHAR) { */
+ } else {
+ tty_insert_flip_char(tty, 0,
+ TTY_NORMAL);
+ info->icount.rx++;
}
- } else { /* normal character reception */
- /* load # chars available from the chip */
- char_count = readb(base_addr +
- (CyRDCR << index));
+ } else {
+ tty_insert_flip_char(tty, 0, TTY_NORMAL);
+ info->icount.rx++;
+ }
+ } else {
+ /* there was a software buffer overrun and nothing
+ * could be done about it!!! */
+ info->icount.buf_overrun++;
+ info->idle_stats.overruns++;
+ }
+ } else { /* normal character reception */
+ /* load # chars available from the chip */
+ char_count = readb(base_addr + (CyRDCR << index));
#ifdef CY_ENABLE_MONITORING
- ++info->mon.int_count;
- info->mon.char_count += char_count;
- if (char_count > info->mon.char_max)
- info->mon.char_max = char_count;
- info->mon.char_last = char_count;
+ ++info->mon.int_count;
+ info->mon.char_count += char_count;
+ if (char_count > info->mon.char_max)
+ info->mon.char_max = char_count;
+ info->mon.char_last = char_count;
#endif
- len = tty_buffer_request_room(tty, char_count);
- while (len--) {
- data = readb(base_addr +
- (CyRDSR << index));
- tty_insert_flip_char(tty, data,
- TTY_NORMAL);
- info->idle_stats.recv_bytes++;
- info->icount.rx++;
+ len = tty_buffer_request_room(tty, char_count);
+ while (len--) {
+ data = readb(base_addr + (CyRDSR << index));
+ tty_insert_flip_char(tty, data, TTY_NORMAL);
+ info->idle_stats.recv_bytes++;
+ info->icount.rx++;
#ifdef CY_16Y_HACK
- udelay(10L);
+ udelay(10L);
#endif
- }
- info->idle_stats.recv_idle = jiffies;
- }
- tty_schedule_flip(tty);
}
- /* end of service */
- cy_writeb(base_addr + (CyRIR << index), (save_xir & 0x3f));
- cy_writeb(base_addr + (CyCAR << index), (save_car));
- spin_unlock(&cinfo->card_lock);
+ info->idle_stats.recv_idle = jiffies;
}
+ tty_schedule_flip(tty);
+end:
+ /* end of service */
+ cy_writeb(base_addr + (CyRIR << index), save_xir & 0x3f);
+ cy_writeb(base_addr + (CyCAR << index), save_car);
+}
+
+static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
+ void __iomem *base_addr)
+{
+ struct cyclades_port *info;
+ int char_count, index = cinfo->bus_index;
+ u8 save_xir, channel, save_car, outch;
- if (status & CySRTransmit) { /* transmission interrupt */
- /* Since we only get here when the transmit buffer
- is empty, we know we can always stuff a dozen
- characters. */
+ /* Since we only get here when the transmit buffer
+ is empty, we know we can always stuff a dozen
+ characters. */
#ifdef CY_DEBUG_INTERRUPTS
- printk(KERN_DEBUG "cyy_interrupt: xmit intr, chip %d\n", chip);
+ printk(KERN_DEBUG "cyy_interrupt: xmit intr, chip %d\n", chip);
#endif
- /* determine the channel & change to that context */
- spin_lock(&cinfo->card_lock);
- save_xir = (u_char) readb(base_addr + (CyTIR << index));
- channel = (u_short) (save_xir & CyIRChannel);
- save_car = readb(base_addr + (CyCAR << index));
- cy_writeb(base_addr + (CyCAR << index), save_xir);
+ /* determine the channel & change to that context */
+ save_xir = readb(base_addr + (CyTIR << index));
+ channel = save_xir & CyIRChannel;
+ save_car = readb(base_addr + (CyCAR << index));
+ cy_writeb(base_addr + (CyCAR << index), save_xir);
- /* validate the port# (as configured and open) */
- if (channel + chip * 4 >= cinfo->nports) {
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr + (CySRER << index)) &
- ~CyTxRdy);
- goto txend;
- }
- info = &cinfo->ports[channel + chip * 4];
- if (info->tty == NULL) {
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr + (CySRER << index)) &
- ~CyTxRdy);
- goto txdone;
- }
+ /* validate the port# (as configured and open) */
+ if (channel + chip * 4 >= cinfo->nports) {
+ cy_writeb(base_addr + (CySRER << index),
+ readb(base_addr + (CySRER << index)) & ~CyTxRdy);
+ goto end;
+ }
+ info = &cinfo->ports[channel + chip * 4];
+ if (info->tty == NULL) {
+ cy_writeb(base_addr + (CySRER << index),
+ readb(base_addr + (CySRER << index)) & ~CyTxRdy);
+ goto end;
+ }
- /* load the on-chip space for outbound data */
- char_count = info->xmit_fifo_size;
+ /* load the on-chip space for outbound data */
+ char_count = info->xmit_fifo_size;
- if (info->x_char) { /* send special char */
- outch = info->x_char;
- cy_writeb(base_addr + (CyTDR << index), outch);
- char_count--;
- info->icount.tx++;
- info->x_char = 0;
- }
+ if (info->x_char) { /* send special char */
+ outch = info->x_char;
+ cy_writeb(base_addr + (CyTDR << index), outch);
+ char_count--;
+ info->icount.tx++;
+ info->x_char = 0;
+ }
- if (info->breakon || info->breakoff) {
- if (info->breakon) {
- cy_writeb(base_addr + (CyTDR << index), 0);
- cy_writeb(base_addr + (CyTDR << index), 0x81);
- info->breakon = 0;
- char_count -= 2;
- }
- if (info->breakoff) {
- cy_writeb(base_addr + (CyTDR << index), 0);
- cy_writeb(base_addr + (CyTDR << index), 0x83);
- info->breakoff = 0;
- char_count -= 2;
- }
+ if (info->breakon || info->breakoff) {
+ if (info->breakon) {
+ cy_writeb(base_addr + (CyTDR << index), 0);
+ cy_writeb(base_addr + (CyTDR << index), 0x81);
+ info->breakon = 0;
+ char_count -= 2;
}
+ if (info->breakoff) {
+ cy_writeb(base_addr + (CyTDR << index), 0);
+ cy_writeb(base_addr + (CyTDR << index), 0x83);
+ info->breakoff = 0;
+ char_count -= 2;
+ }
+ }
- while (char_count-- > 0) {
- if (!info->xmit_cnt) {
- if (readb(base_addr + (CySRER << index)) &
- CyTxMpty) {
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr +
- (CySRER << index)) &
+ while (char_count-- > 0) {
+ if (!info->xmit_cnt) {
+ if (readb(base_addr + (CySRER << index)) & CyTxMpty) {
+ cy_writeb(base_addr + (CySRER << index),
+ readb(base_addr + (CySRER << index)) &
~CyTxMpty);
- } else {
- cy_writeb(base_addr + (CySRER << index),
- (readb(base_addr +
- (CySRER << index)) &
+ } else {
+ cy_writeb(base_addr + (CySRER << index),
+ (readb(base_addr + (CySRER << index)) &
~CyTxRdy) | CyTxMpty);
- }
- goto txdone;
}
- if (info->xmit_buf == NULL) {
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr + (CySRER << index)) &
+ goto done;
+ }
+ if (info->xmit_buf == NULL) {
+ cy_writeb(base_addr + (CySRER << index),
+ readb(base_addr + (CySRER << index)) &
~CyTxRdy);
- goto txdone;
- }
- if (info->tty->stopped || info->tty->hw_stopped) {
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr + (CySRER << index)) &
+ goto done;
+ }
+ if (info->tty->stopped || info->tty->hw_stopped) {
+ cy_writeb(base_addr + (CySRER << index),
+ readb(base_addr + (CySRER << index)) &
~CyTxRdy);
- goto txdone;
- }
- /* Because the Embedded Transmit Commands have
- been enabled, we must check to see if the
- escape character, NULL, is being sent. If it
- is, we must ensure that there is room for it
- to be doubled in the output stream. Therefore
- we no longer advance the pointer when the
- character is fetched, but rather wait until
- after the check for a NULL output character.
- This is necessary because there may not be
- room for the two chars needed to send a NULL.)
- */
- outch = info->xmit_buf[info->xmit_tail];
- if (outch) {
+ goto done;
+ }
+ /* Because the Embedded Transmit Commands have been enabled,
+ * we must check to see if the escape character, NULL, is being
+ * sent. If it is, we must ensure that there is room for it to
+ * be doubled in the output stream. Therefore we no longer
+ * advance the pointer when the character is fetched, but
+ * rather wait until after the check for a NULL output
+ * character. This is necessary because there may not be room
+ * for the two chars needed to send a NULL.)
+ */
+ outch = info->xmit_buf[info->xmit_tail];
+ if (outch) {
+ info->xmit_cnt--;
+ info->xmit_tail = (info->xmit_tail + 1) &
+ (SERIAL_XMIT_SIZE - 1);
+ cy_writeb(base_addr + (CyTDR << index), outch);
+ info->icount.tx++;
+ } else {
+ if (char_count > 1) {
info->xmit_cnt--;
info->xmit_tail = (info->xmit_tail + 1) &
- (SERIAL_XMIT_SIZE - 1);
+ (SERIAL_XMIT_SIZE - 1);
cy_writeb(base_addr + (CyTDR << index), outch);
+ cy_writeb(base_addr + (CyTDR << index), 0);
info->icount.tx++;
- } else {
- if (char_count > 1) {
- info->xmit_cnt--;
- info->xmit_tail = (info->xmit_tail + 1)&
- (SERIAL_XMIT_SIZE - 1);
- cy_writeb(base_addr + (CyTDR << index),
- outch);
- cy_writeb(base_addr + (CyTDR << index),
- 0);
- info->icount.tx++;
- char_count--;
- }
+ char_count--;
}
}
-
-txdone:
- if (info->xmit_cnt < WAKEUP_CHARS) {
- cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP);
- }
-txend:
- /* end of service */
- cy_writeb(base_addr + (CyTIR << index), (save_xir & 0x3f));
- cy_writeb(base_addr + (CyCAR << index), (save_car));
- spin_unlock(&cinfo->card_lock);
}
- if (status & CySRModem) { /* modem interrupt */
+done:
+ tty_wakeup(info->tty);
+end:
+ /* end of service */
+ cy_writeb(base_addr + (CyTIR << index), save_xir & 0x3f);
+ cy_writeb(base_addr + (CyCAR << index), save_car);
+}
- /* determine the channel & change to that context */
- spin_lock(&cinfo->card_lock);
- save_xir = (u_char) readb(base_addr + (CyMIR << index));
- channel = (u_short) (save_xir & CyIRChannel);
- info = &cinfo->ports[channel + chip * 4];
- save_car = readb(base_addr + (CyCAR << index));
- cy_writeb(base_addr + (CyCAR << index), save_xir);
+static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
+ void __iomem *base_addr)
+{
+ struct cyclades_port *info;
+ int index = cinfo->bus_index;
+ u8 save_xir, channel, save_car, mdm_change, mdm_status;
- mdm_change = readb(base_addr + (CyMISR << index));
- mdm_status = readb(base_addr + (CyMSVR1 << index));
+ /* determine the channel & change to that context */
+ save_xir = readb(base_addr + (CyMIR << index));
+ channel = save_xir & CyIRChannel;
+ info = &cinfo->ports[channel + chip * 4];
+ save_car = readb(base_addr + (CyCAR << index));
+ cy_writeb(base_addr + (CyCAR << index), save_xir);
- if (info->tty) {
- if (mdm_change & CyANY_DELTA) {
- /* For statistics only */
- if (mdm_change & CyDCD)
- info->icount.dcd++;
- if (mdm_change & CyCTS)
- info->icount.cts++;
- if (mdm_change & CyDSR)
- info->icount.dsr++;
- if (mdm_change & CyRI)
- info->icount.rng++;
-
- cy_sched_event(info, Cy_EVENT_DELTA_WAKEUP);
- }
+ mdm_change = readb(base_addr + (CyMISR << index));
+ mdm_status = readb(base_addr + (CyMSVR1 << index));
- if ((mdm_change & CyDCD) &&
- (info->flags & ASYNC_CHECK_CD)) {
- if (mdm_status & CyDCD) {
- cy_sched_event(info,
- Cy_EVENT_OPEN_WAKEUP);
- } else {
- cy_sched_event(info, Cy_EVENT_HANGUP);
- }
- }
- if ((mdm_change & CyCTS) &&
- (info->flags & ASYNC_CTS_FLOW)) {
- if (info->tty->hw_stopped) {
- if (mdm_status & CyCTS) {
- /* cy_start isn't used
- because... !!! */
- info->tty->hw_stopped = 0;
- cy_writeb(base_addr +
- (CySRER << index),
- readb(base_addr +
- (CySRER <<
- index))|
- CyTxRdy);
- cy_sched_event(info,
- Cy_EVENT_WRITE_WAKEUP);
- }
- } else {
- if (!(mdm_status & CyCTS)) {
- /* cy_stop isn't used
- because ... !!! */
- info->tty->hw_stopped = 1;
- cy_writeb(base_addr +
- (CySRER << index),
- readb(base_addr +
- (CySRER <<
- index)) &
- ~CyTxRdy);
- }
- }
+ if (!info->tty)
+ goto end;
+
+ if (mdm_change & CyANY_DELTA) {
+ /* For statistics only */
+ if (mdm_change & CyDCD)
+ info->icount.dcd++;
+ if (mdm_change & CyCTS)
+ info->icount.cts++;
+ if (mdm_change & CyDSR)
+ info->icount.dsr++;
+ if (mdm_change & CyRI)
+ info->icount.rng++;
+
+ wake_up_interruptible(&info->delta_msr_wait);
+ }
+
+ if ((mdm_change & CyDCD) && (info->flags & ASYNC_CHECK_CD)) {
+ if (!(mdm_status & CyDCD)) {
+ tty_hangup(info->tty);
+ info->flags &= ~ASYNC_NORMAL_ACTIVE;
+ }
+ wake_up_interruptible(&info->open_wait);
+ }
+ if ((mdm_change & CyCTS) && (info->flags & ASYNC_CTS_FLOW)) {
+ if (info->tty->hw_stopped) {
+ if (mdm_status & CyCTS) {
+ /* cy_start isn't used
+ because... !!! */
+ info->tty->hw_stopped = 0;
+ cy_writeb(base_addr + (CySRER << index),
+ readb(base_addr + (CySRER << index)) |
+ CyTxRdy);
+ tty_wakeup(info->tty);
}
-/* if (mdm_change & CyDSR) {
+ } else {
+ if (!(mdm_status & CyCTS)) {
+ /* cy_stop isn't used
+ because ... !!! */
+ info->tty->hw_stopped = 1;
+ cy_writeb(base_addr + (CySRER << index),
+ readb(base_addr + (CySRER << index)) &
+ ~CyTxRdy);
}
- if (mdm_change & CyRI) {
- }*/
}
- /* end of service */
- cy_writeb(base_addr + (CyMIR << index), (save_xir & 0x3f));
- cy_writeb(base_addr + (CyCAR << index), save_car);
- spin_unlock(&cinfo->card_lock);
}
+/* if (mdm_change & CyDSR) {
+ }
+ if (mdm_change & CyRI) {
+ }*/
+end:
+ /* end of service */
+ cy_writeb(base_addr + (CyMIR << index), save_xir & 0x3f);
+ cy_writeb(base_addr + (CyCAR << index), save_car);
}
/* The real interrupt service routine is called
int status;
struct cyclades_card *cinfo = dev_id;
void __iomem *base_addr, *card_base_addr;
- int chip;
+ unsigned int chip, too_many, had_work;
int index;
- int too_many;
- int had_work;
if (unlikely(cinfo == NULL)) {
#ifdef CY_DEBUG_INTERRUPTS
chips to be checked in a round-robin fashion (after
draining each of a bunch (1000) of characters).
*/
- if (1000 < too_many++) {
+ if (1000 < too_many++)
break;
- }
- cyy_intr_chip(cinfo, chip, base_addr, status,
- index);
+ spin_lock(&cinfo->card_lock);
+ if (status & CySRReceive) /* rx intr */
+ cyy_chip_rx(cinfo, chip, base_addr);
+ if (status & CySRTransmit) /* tx intr */
+ cyy_chip_tx(cinfo, chip, base_addr);
+ if (status & CySRModem) /* modem intr */
+ cyy_chip_modem(cinfo, chip, base_addr);
+ spin_unlock(&cinfo->card_lock);
}
}
} while (had_work);
struct ZFW_CTRL __iomem *zfw_ctrl;
struct BOARD_CTRL __iomem *board_ctrl;
__u32 __iomem *pci_doorbell;
- int index;
+ unsigned int index;
firm_id = cinfo->base_addr + ID_ADDRESS;
if (!ISZLOADED(*cinfo)) {
return 0;
} /* cyz_issue_cmd */
-static void
-cyz_handle_rx(struct cyclades_port *info, struct CH_CTRL __iomem *ch_ctrl,
+static void cyz_handle_rx(struct cyclades_port *info,
struct BUF_CTRL __iomem *buf_ctrl)
{
struct cyclades_card *cinfo = info->card;
struct tty_struct *tty = info->tty;
- int char_count;
+ unsigned int char_count;
int len;
#ifdef BLOCKMOVE
unsigned char *buf;
char_count = rx_put - rx_get;
else
char_count = rx_put - rx_get + rx_bufsize;
- if (char_count >= (int)readl(&buf_ctrl->rx_threshold)) {
- cy_sched_event(info, Cy_EVENT_Z_RX_FULL);
- }
+ if (char_count >= readl(&buf_ctrl->rx_threshold) &&
+ !timer_pending(&cyz_rx_full_timer[
+ info->line]))
+ mod_timer(&cyz_rx_full_timer[info->line],
+ jiffies + 1);
#endif
info->idle_stats.recv_idle = jiffies;
tty_schedule_flip(tty);
}
}
-static void
-cyz_handle_tx(struct cyclades_port *info, struct CH_CTRL __iomem *ch_ctrl,
+static void cyz_handle_tx(struct cyclades_port *info,
struct BUF_CTRL __iomem *buf_ctrl)
{
struct cyclades_card *cinfo = info->card;
struct tty_struct *tty = info->tty;
- char data;
- int char_count;
+ u8 data;
+ unsigned int char_count;
#ifdef BLOCKMOVE
int small_count;
#endif
info->icount.tx++;
}
#endif
+ tty_wakeup(tty);
ztxdone:
- if (info->xmit_cnt < WAKEUP_CHARS) {
- cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP);
- }
/* Update tx_put */
cy_writel(&buf_ctrl->tx_put, tx_put);
}
if ((fw_ver > 241 ? ((u_long) param) :
readl(&ch_ctrl->rs_status)) &
C_RS_DCD) {
- cy_sched_event(info,
- Cy_EVENT_OPEN_WAKEUP);
+ wake_up_interruptible(&info->open_wait);
} else {
- cy_sched_event(info, Cy_EVENT_HANGUP);
+ tty_hangup(info->tty);
+ wake_up_interruptible(&info->open_wait);
+ info->flags &= ~ASYNC_NORMAL_ACTIVE;
}
}
break;
break;
#ifdef Z_WAKE
case C_CM_IOCTLW:
- cy_sched_event(info, Cy_EVENT_SHUTDOWN_WAKEUP);
+ complete(&info->shutdown_wait);
break;
#endif
#ifdef CONFIG_CYZ_INTR
printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, "
"port %ld\n", info->card, channel);
#endif
- cyz_handle_rx(info, ch_ctrl, buf_ctrl);
+ cyz_handle_rx(info, buf_ctrl);
break;
case C_CM_TXBEMPTY:
case C_CM_TXLOWWM:
printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, "
"port %ld\n", info->card, channel);
#endif
- cyz_handle_tx(info, ch_ctrl, buf_ctrl);
+ cyz_handle_tx(info, buf_ctrl);
break;
#endif /* CONFIG_CYZ_INTR */
case C_CM_FATAL:
break;
}
if (delta_count)
- cy_sched_event(info, Cy_EVENT_DELTA_WAKEUP);
+ wake_up_interruptible(&info->delta_msr_wait);
if (special_count)
tty_schedule_flip(tty);
}
struct cyclades_card *cinfo;
struct cyclades_port *info;
struct tty_struct *tty;
- static struct FIRM_ID *firm_id;
- static struct ZFW_CTRL *zfw_ctrl;
- static struct BOARD_CTRL *board_ctrl;
- static struct CH_CTRL *ch_ctrl;
- static struct BUF_CTRL *buf_ctrl;
+ struct FIRM_ID __iomem *firm_id;
+ struct ZFW_CTRL __iomem *zfw_ctrl;
+ struct BOARD_CTRL __iomem *board_ctrl;
+ struct BUF_CTRL __iomem *buf_ctrl;
unsigned long expires = jiffies + HZ;
- int card, port;
+ unsigned int port, card;
for (card = 0; card < NR_CARDS; card++) {
cinfo = &cy_card[card];
for (port = 0; port < cinfo->nports; port++) {
info = &cinfo->ports[port];
tty = info->tty;
- ch_ctrl = &(zfw_ctrl->ch_ctrl[port]);
buf_ctrl = &(zfw_ctrl->buf_ctrl[port]);
if (!info->throttle)
- cyz_handle_rx(info, ch_ctrl, buf_ctrl);
- cyz_handle_tx(info, ch_ctrl, buf_ctrl);
+ cyz_handle_rx(info, buf_ctrl);
+ cyz_handle_tx(info, buf_ctrl);
}
/* poll every 'cyz_polling_cycle' period */
expires = jiffies + cyz_polling_cycle;
struct ZFW_CTRL __iomem *zfw_ctrl;
struct BOARD_CTRL __iomem *board_ctrl;
struct CH_CTRL __iomem *ch_ctrl;
- int retval;
base_addr = card->base_addr;
struct ZFW_CTRL __iomem *zfw_ctrl;
struct BOARD_CTRL __iomem *board_ctrl;
struct CH_CTRL __iomem *ch_ctrl;
- int retval;
base_addr = cinfo->base_addr;
firm_id = base_addr + ID_ADDRESS;
static int cy_open(struct tty_struct *tty, struct file *filp)
{
struct cyclades_port *info;
- unsigned int i;
- int retval, line;
+ unsigned int i, line;
+ int retval;
line = tty->index;
- if ((line < 0) || (NR_PORTS <= line)) {
+ if ((tty->index < 0) || (NR_PORTS <= line)) {
return -ENODEV;
}
for (i = 0; i < NR_CARDS; i++)
spin_lock_irqsave(&card->card_lock, flags);
tty->closing = 0;
- info->event = 0;
info->tty = NULL;
if (info->blocked_open) {
spin_unlock_irqrestore(&card->card_lock, flags);
cy_flush_buffer(tty);
shutdown(info);
- info->event = 0;
info->count = 0;
#ifdef CY_DEBUG_COUNT
printk(KERN_DEBUG "cyc:cy_hangup (%d): setting count to 0\n",
static int __devinit cy_init_card(struct cyclades_card *cinfo)
{
struct cyclades_port *info;
- u32 mailbox;
- unsigned int nports;
+ u32 uninitialized_var(mailbox);
+ unsigned int nports, port;
unsigned short chip_number;
- int index, port;
+ int uninitialized_var(index);
spin_lock_init(&cinfo->card_lock);
info->closing_wait = CLOSING_WAIT_DELAY;
info->close_delay = 5 * HZ / 10;
- INIT_WORK(&info->tqueue, do_softint);
init_waitqueue_head(&info->open_wait);
init_waitqueue_head(&info->close_wait);
init_completion(&info->shutdown_wait);
} /* cy_detect_isa */
#ifdef CONFIG_PCI
-static void __devinit plx_init(void __iomem * addr, __u32 initctl)
+static inline int __devinit cyc_isfwstr(const char *str, unsigned int size)
+{
+ unsigned int a;
+
+ for (a = 0; a < size && *str; a++, str++)
+ if (*str & 0x80)
+ return -EINVAL;
+
+ for (; a < size; a++, str++)
+ if (*str)
+ return -EINVAL;
+
+ return 0;
+}
+
+static inline void __devinit cyz_fpga_copy(void __iomem *fpga, u8 *data,
+ unsigned int size)
+{
+ for (; size > 0; size--) {
+ cy_writel(fpga, *data++);
+ udelay(10);
+ }
+}
+
+static void __devinit plx_init(struct pci_dev *pdev, int irq,
+ struct RUNTIME_9060 __iomem *addr)
{
/* Reset PLX */
- cy_writel(addr + initctl, readl(addr + initctl) | 0x40000000);
+ cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x40000000);
udelay(100L);
- cy_writel(addr + initctl, readl(addr + initctl) & ~0x40000000);
+ cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x40000000);
/* Reload Config. Registers from EEPROM */
- cy_writel(addr + initctl, readl(addr + initctl) | 0x20000000);
+ cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x20000000);
udelay(100L);
- cy_writel(addr + initctl, readl(addr + initctl) & ~0x20000000);
+ cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x20000000);
+
+ /* For some yet unknown reason, once the PLX9060 reloads the EEPROM,
+ * the IRQ is lost and, thus, we have to re-write it to the PCI config.
+ * registers. This will remain here until we find a permanent fix.
+ */
+ pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq);
+}
+
+static int __devinit __cyz_load_fw(const struct firmware *fw,
+ const char *name, const u32 mailbox, void __iomem *base,
+ void __iomem *fpga)
+{
+ void *ptr = fw->data;
+ struct zfile_header *h = ptr;
+ struct zfile_config *c, *cs;
+ struct zfile_block *b, *bs;
+ unsigned int a, tmp, len = fw->size;
+#define BAD_FW KERN_ERR "Bad firmware: "
+ if (len < sizeof(*h)) {
+ printk(BAD_FW "too short: %u<%zu\n", len, sizeof(*h));
+ return -EINVAL;
+ }
+
+ cs = ptr + h->config_offset;
+ bs = ptr + h->block_offset;
+
+ if ((void *)(cs + h->n_config) > ptr + len ||
+ (void *)(bs + h->n_blocks) > ptr + len) {
+ printk(BAD_FW "too short");
+ return -EINVAL;
+ }
+
+ if (cyc_isfwstr(h->name, sizeof(h->name)) ||
+ cyc_isfwstr(h->date, sizeof(h->date))) {
+ printk(BAD_FW "bad formatted header string\n");
+ return -EINVAL;
+ }
+
+ if (strncmp(name, h->name, sizeof(h->name))) {
+ printk(BAD_FW "bad name '%s' (expected '%s')\n", h->name, name);
+ return -EINVAL;
+ }
+
+ tmp = 0;
+ for (c = cs; c < cs + h->n_config; c++) {
+ for (a = 0; a < c->n_blocks; a++)
+ if (c->block_list[a] > h->n_blocks) {
+ printk(BAD_FW "bad block ref number in cfgs\n");
+ return -EINVAL;
+ }
+ if (c->mailbox == mailbox && c->function == 0) /* 0 is normal */
+ tmp++;
+ }
+ if (!tmp) {
+ printk(BAD_FW "nothing appropriate\n");
+ return -EINVAL;
+ }
+
+ for (b = bs; b < bs + h->n_blocks; b++)
+ if (b->file_offset + b->size > len) {
+ printk(BAD_FW "bad block data offset\n");
+ return -EINVAL;
+ }
+
+ /* everything is OK, let's seek'n'load it */
+ for (c = cs; c < cs + h->n_config; c++)
+ if (c->mailbox == mailbox && c->function == 0)
+ break;
+
+ for (a = 0; a < c->n_blocks; a++) {
+ b = &bs[c->block_list[a]];
+ if (b->type == ZBLOCK_FPGA) {
+ if (fpga != NULL)
+ cyz_fpga_copy(fpga, ptr + b->file_offset,
+ b->size);
+ } else {
+ if (base != NULL)
+ memcpy_toio(base + b->ram_offset,
+ ptr + b->file_offset, b->size);
+ }
+ }
+#undef BAD_FW
+ return 0;
+}
+
+static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
+ struct RUNTIME_9060 __iomem *ctl_addr, int irq)
+{
+ const struct firmware *fw;
+ struct FIRM_ID __iomem *fid = base_addr + ID_ADDRESS;
+ struct CUSTOM_REG __iomem *cust = base_addr;
+ struct ZFW_CTRL __iomem *pt_zfwctrl;
+ void __iomem *tmp;
+ u32 mailbox, status;
+ unsigned int i;
+ int retval;
+
+ retval = request_firmware(&fw, "cyzfirm.bin", &pdev->dev);
+ if (retval) {
+ dev_err(&pdev->dev, "can't get firmware\n");
+ goto err;
+ }
+
+ /* Check whether the firmware is already loaded and running. If
+ positive, skip this board */
+ if (Z_FPGA_LOADED(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) {
+ u32 cntval = readl(base_addr + 0x190);
+
+ udelay(100);
+ if (cntval != readl(base_addr + 0x190)) {
+ /* FW counter is working, FW is running */
+ dev_dbg(&pdev->dev, "Cyclades-Z FW already loaded. "
+ "Skipping board.\n");
+ retval = 0;
+ goto err_rel;
+ }
+ }
+
+ /* start boot */
+ cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) &
+ ~0x00030800UL);
+
+ mailbox = readl(&ctl_addr->mail_box_0);
+
+ if (mailbox == 0 || Z_FPGA_LOADED(ctl_addr)) {
+ /* stops CPU and set window to beginning of RAM */
+ cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
+ cy_writel(&cust->cpu_stop, 0);
+ cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
+ udelay(100);
+ }
+
+ plx_init(pdev, irq, ctl_addr);
+
+ if (mailbox != 0) {
+ /* load FPGA */
+ retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, NULL,
+ base_addr);
+ if (retval)
+ goto err_rel;
+ if (!Z_FPGA_LOADED(ctl_addr)) {
+ dev_err(&pdev->dev, "fw upload successful, but fw is "
+ "not loaded\n");
+ goto err_rel;
+ }
+ }
+
+ /* stops CPU and set window to beginning of RAM */
+ cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
+ cy_writel(&cust->cpu_stop, 0);
+ cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
+ udelay(100);
+
+ /* clear memory */
+ for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++)
+ cy_writeb(tmp, 255);
+ if (mailbox != 0) {
+ /* set window to last 512K of RAM */
+ cy_writel(&ctl_addr->loc_addr_base, WIN_RAM + RAM_SIZE);
+ //sleep(1);
+ for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++)
+ cy_writeb(tmp, 255);
+ /* set window to beginning of RAM */
+ cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
+ //sleep(1);
+ }
+
+ retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, base_addr, NULL);
+ release_firmware(fw);
+ if (retval)
+ goto err;
+
+ /* finish boot and start boards */
+ cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
+ cy_writel(&cust->cpu_start, 0);
+ cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
+ i = 0;
+ while ((status = readl(&fid->signature)) != ZFIRM_ID && i++ < 40)
+ msleep(100);
+ if (status != ZFIRM_ID) {
+ if (status == ZFIRM_HLT) {
+ dev_err(&pdev->dev, "you need an external power supply "
+ "for this number of ports. Firmware halted and "
+ "board reset.\n");
+ retval = -EIO;
+ goto err;
+ }
+ dev_warn(&pdev->dev, "fid->signature = 0x%x... Waiting "
+ "some more time\n", status);
+ while ((status = readl(&fid->signature)) != ZFIRM_ID &&
+ i++ < 200)
+ msleep(100);
+ if (status != ZFIRM_ID) {
+ dev_err(&pdev->dev, "Board not started in 20 seconds! "
+ "Giving up. (fid->signature = 0x%x)\n",
+ status);
+ dev_info(&pdev->dev, "*** Warning ***: if you are "
+ "upgrading the FW, please power cycle the "
+ "system before loading the new FW to the "
+ "Cyclades-Z.\n");
+
+ if (Z_FPGA_LOADED(ctl_addr))
+ plx_init(pdev, irq, ctl_addr);
+
+ retval = -EIO;
+ goto err;
+ }
+ dev_dbg(&pdev->dev, "Firmware started after %d seconds.\n",
+ i / 10);
+ }
+ pt_zfwctrl = base_addr + readl(&fid->zfwctrl_addr);
+
+ dev_dbg(&pdev->dev, "fid=> %p, zfwctrl_addr=> %x, npt_zfwctrl=> %p\n",
+ base_addr + ID_ADDRESS, readl(&fid->zfwctrl_addr),
+ base_addr + readl(&fid->zfwctrl_addr));
+
+ dev_info(&pdev->dev, "Cyclades-Z FW loaded: version = %x, ports = %u\n",
+ readl(&pt_zfwctrl->board_ctrl.fw_version),
+ readl(&pt_zfwctrl->board_ctrl.n_channel));
+
+ if (readl(&pt_zfwctrl->board_ctrl.n_channel) == 0) {
+ dev_warn(&pdev->dev, "no Cyclades-Z ports were found. Please "
+ "check the connection between the Z host card and the "
+ "serial expanders.\n");
+
+ if (Z_FPGA_LOADED(ctl_addr))
+ plx_init(pdev, irq, ctl_addr);
+
+ dev_info(&pdev->dev, "Null number of ports detected. Board "
+ "reset.\n");
+ retval = 0;
+ goto err;
+ }
+
+ cy_writel(&pt_zfwctrl->board_ctrl.op_system, C_OS_LINUX);
+ cy_writel(&pt_zfwctrl->board_ctrl.dr_version, DRIVER_VERSION);
+
+ /*
+ Early firmware failed to start looking for commands.
+ This enables firmware interrupts for those commands.
+ */
+ cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) |
+ (1 << 17));
+ cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) |
+ 0x00030800UL);
+
+ plx_init(pdev, irq, ctl_addr);
+
+ return 0;
+err_rel:
+ release_firmware(fw);
+err:
+ return retval;
}
static int __devinit cy_pci_probe(struct pci_dev *pdev,
}
/* Disable interrupts on the PLX before resetting it */
- cy_writew(addr0 + 0x68,
- readw(addr0 + 0x68) & ~0x0900);
+ cy_writew(addr0 + 0x68, readw(addr0 + 0x68) & ~0x0900);
- plx_init(addr0, 0x6c);
- /* For some yet unknown reason, once the PLX9060 reloads
- the EEPROM, the IRQ is lost and, thus, we have to
- re-write it to the PCI config. registers.
- This will remain here until we find a permanent
- fix. */
- pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq);
+ plx_init(pdev, irq, addr0);
mailbox = (u32)readl(&ctl_addr->mail_box_0);
if ((mailbox == ZO_V1) || (mailbox == ZO_V2))
cy_writel(addr2 + ID_ADDRESS, 0L);
+ retval = cyz_load_fw(pdev, addr2, addr0, irq);
+ if (retval)
+ goto err_unmap;
/* This must be a Cyclades-8Zo/PCI. The extendable
version will have a different device_id and will
be allocated its maximum number of ports. */
}
}
#endif /* CONFIG_CYZ_INTR */
- cy_card[card_no].num_chips = -1;
+ cy_card[card_no].num_chips = (unsigned int)-1;
}
/* set cy_card */
case PLX_9060:
case PLX_9080:
default: /* Old boards, use PLX_9060 */
-
- plx_init(addr0, 0x6c);
- /* For some yet unknown reason, once the PLX9060 reloads
- the EEPROM, the IRQ is lost and, thus, we have to
- re-write it to the PCI config. registers.
- This will remain here until we find a permanent
- fix. */
- pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq);
-
+ plx_init(pdev, irq, addr0);
cy_writew(addr0 + 0x68, readw(addr0 + 0x68) | 0x0900);
break;
}
#ifdef CONFIG_PCI
/* look for pci boards */
retval = pci_register_driver(&cy_pci_driver);
- if (retval && !nboards)
- goto err_unr;
+ if (retval && !nboards) {
+ tty_unregister_driver(cy_serial_driver);
+ goto err_frtty;
+ }
#endif
return 0;
-err_unr:
- tty_unregister_driver(cy_serial_driver);
err_frtty:
put_tty_driver(cy_serial_driver);
err:
static void __exit cy_cleanup_module(void)
{
struct cyclades_card *card;
- int i, e1;
+ unsigned int i, e1;
#ifndef CONFIG_CYZ_INTR
del_timer_sync(&cyz_timerlist);
#endif /* CONFIG_CYZ_INTR */
)
free_irq(card->irq, card);
- for (e1 = card->first_line;
- e1 < card->first_line +
+ for (e1 = card->first_line; e1 < card->first_line +
card->nports; e1++)
tty_unregister_device(cy_serial_driver, e1);
kfree(card->ports);