*/
struct ub_dev;
-#define UB_MAX_REQ_SG 4
+#define UB_MAX_REQ_SG 9 /* cdrecord requires 32KB and maybe a header */
#define UB_MAX_SECTORS 64
/*
struct bulk_cs_wrap work_bcs;
struct usb_ctrlrequest work_cr;
- int sg_stat[UB_MAX_REQ_SG+1];
+ int sg_stat[6];
struct ub_scsi_trace tr;
};
"qlen %d qmax %d\n",
sc->cmd_queue.qlen, sc->cmd_queue.qmax);
cnt += sprintf(page + cnt,
- "sg %d %d %d %d %d\n",
+ "sg %d %d %d %d %d .. %d\n",
sc->sg_stat[0],
sc->sg_stat[1],
sc->sg_stat[2],
sc->sg_stat[3],
- sc->sg_stat[4]);
+ sc->sg_stat[4],
+ sc->sg_stat[5]);
list_for_each (p, &sc->luns) {
lun = list_entry(p, struct ub_lun, link);
return -1;
}
cmd->nsg = n_elem;
- sc->sg_stat[n_elem]++;
+ sc->sg_stat[n_elem < 5 ? n_elem : 5]++;
/*
* build the command
return -1;
}
cmd->nsg = n_elem;
- sc->sg_stat[n_elem]++;
+ sc->sg_stat[n_elem < 5 ? n_elem : 5]++;
memcpy(&cmd->cdb, rq->cmd, rq->cmd_len);
cmd->cdb_len = rq->cmd_len;
sc->last_pipe = sc->send_bulk_pipe;
usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->send_bulk_pipe,
bcb, US_BULK_CB_WRAP_LEN, ub_urb_complete, sc);
- sc->work_urb.transfer_flags = URB_ASYNC_UNLINK;
/* Fill what we shouldn't be filling, because usb-storage did so. */
sc->work_urb.actual_length = 0;
if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
/* XXX Clear stalls */
- printk("ub: cmd #%d start failed (%d)\n", cmd->tag, rc); /* P3 */
ub_complete(&sc->work_done);
return rc;
}
return;
}
if (urb->status != 0) {
- printk("ub: cmd #%d cmd status (%d)\n", cmd->tag, urb->status); /* P3 */
goto Bad_End;
}
if (urb->actual_length != US_BULK_CB_WRAP_LEN) {
- printk("ub: cmd #%d xferred %d\n", cmd->tag, urb->actual_length); /* P3 */
/* XXX Must do reset here to unconfuse the device */
goto Bad_End;
}
usb_fill_bulk_urb(&sc->work_urb, sc->dev, pipe,
page_address(sg->page) + sg->offset, sg->length,
ub_urb_complete, sc);
- sc->work_urb.transfer_flags = URB_ASYNC_UNLINK;
sc->work_urb.actual_length = 0;
sc->work_urb.error_count = 0;
sc->work_urb.status = 0;
if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
/* XXX Clear stalls */
- printk("ub: data #%d submit failed (%d)\n", cmd->tag, rc); /* P3 */
ub_complete(&sc->work_done);
ub_state_done(sc, cmd, rc);
return;
sc->last_pipe = sc->recv_bulk_pipe;
usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->recv_bulk_pipe,
&sc->work_bcs, US_BULK_CS_WRAP_LEN, ub_urb_complete, sc);
- sc->work_urb.transfer_flags = URB_ASYNC_UNLINK;
sc->work_urb.actual_length = 0;
sc->work_urb.error_count = 0;
sc->work_urb.status = 0;
scmd->nsg = 1;
sg = &scmd->sgv[0];
sg->page = virt_to_page(sc->top_sense);
- sg->offset = (unsigned int)sc->top_sense & (PAGE_SIZE-1);
+ sg->offset = (unsigned long)sc->top_sense & (PAGE_SIZE-1);
sg->length = UB_SENSE_SIZE;
scmd->len = UB_SENSE_SIZE;
scmd->lun = cmd->lun;
usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
(unsigned char*) cr, NULL, 0, ub_urb_complete, sc);
- sc->work_urb.transfer_flags = URB_ASYNC_UNLINK;
sc->work_urb.actual_length = 0;
sc->work_urb.error_count = 0;
sc->work_urb.status = 0;
cmd->nsg = 1;
sg = &cmd->sgv[0];
sg->page = virt_to_page(p);
- sg->offset = (unsigned int)p & (PAGE_SIZE-1);
+ sg->offset = (unsigned long)p & (PAGE_SIZE-1);
sg->length = 8;
cmd->len = 8;
cmd->lun = lun;
usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe,
(unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl);
- sc->work_urb.transfer_flags = 0;
sc->work_urb.actual_length = 0;
sc->work_urb.error_count = 0;
sc->work_urb.status = 0;
if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
if (rc == -EPIPE) {
- printk("%s: Stall at GetMaxLUN, using 1 LUN\n",
+ printk("%s: Stall submitting GetMaxLUN, using 1 LUN\n",
sc->name); /* P3 */
} else {
- printk(KERN_WARNING
+ printk(KERN_NOTICE
"%s: Unable to submit GetMaxLUN (%d)\n",
sc->name, rc);
}
del_timer_sync(&timer);
usb_kill_urb(&sc->work_urb);
+ if ((rc = sc->work_urb.status) < 0) {
+ if (rc == -EPIPE) {
+ printk("%s: Stall at GetMaxLUN, using 1 LUN\n",
+ sc->name); /* P3 */
+ } else {
+ printk(KERN_NOTICE
+ "%s: Error at GetMaxLUN (%d)\n",
+ sc->name, rc);
+ }
+ goto err_io;
+ }
+
if (sc->work_urb.actual_length != 1) {
printk("%s: GetMaxLUN returned %d bytes\n", sc->name,
sc->work_urb.actual_length); /* P3 */
kfree(p);
return nluns;
+err_io:
err_submit:
kfree(p);
err_alloc:
usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
(unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl);
- sc->work_urb.transfer_flags = 0;
sc->work_urb.actual_length = 0;
sc->work_urb.error_count = 0;
sc->work_urb.status = 0;
* This is needed to clear toggles. It is a problem only if we do
* `rmmod ub && modprobe ub` without disconnects, but we like that.
*/
+#if 0 /* iPod Mini fails if we do this (big white iPod works) */
ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
ub_probe_clear_stall(sc, sc->send_bulk_pipe);
+#endif
/*
* The way this is used by the startup code is a little specific.
for (i = 0; i < 3; i++) {
if ((rc = ub_sync_getmaxlun(sc)) < 0) {
/*
- * Some devices (i.e. Iomega Zip100) need this --
- * apparently the bulk pipes get STALLed when the
- * GetMaxLUN request is processed.
- * XXX I have a ZIP-100, verify it does this.
+ * This segment is taken from usb-storage. They say
+ * that ZIP-100 needs this, but my own ZIP-100 works
+ * fine without this.
+ * Still, it does not seem to hurt anything.
*/
if (rc == -EPIPE) {
ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
disk->first_minor = lun->id * UB_MINORS_PER_MAJOR;
disk->fops = &ub_bd_fops;
disk->private_data = lun;
- disk->driverfs_dev = &sc->intf->dev; /* XXX Many to one ok? */
+ disk->driverfs_dev = &sc->intf->dev;
rc = -ENOMEM;
if ((q = blk_init_queue(ub_request_fn, &sc->lock)) == NULL)
{
int rc;
- /* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu ub_lun %zu\n",
- sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev), sizeof(struct ub_lun));
-
if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0)
goto err_regblkdev;
devfs_mk_dir(DEVFS_NAME);