/*
* Disk Array driver for HP SA 5xxx and 6xxx Controllers
- * Copyright 2000, 2005 Hewlett-Packard Development Company, L.P.
+ * Copyright 2000, 2006 Hewlett-Packard Development Company, L.P.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/completion.h>
#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
-#define DRIVER_NAME "HP CISS Driver (v 2.6.8)"
-#define DRIVER_VERSION CCISS_DRIVER_VERSION(2,6,8)
+#define DRIVER_NAME "HP CISS Driver (v 2.6.10)"
+#define DRIVER_VERSION CCISS_DRIVER_VERSION(2,6,10)
/* Embedded module documentation macros - see modules.h */
MODULE_AUTHOR("Hewlett-Packard Company");
-MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 2.6.8");
+MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 2.6.10");
MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
" SA6i P600 P800 P400 P400i E200 E200i");
MODULE_LICENSE("GPL");
};
MODULE_DEVICE_TABLE(pci, cciss_pci_device_id);
-#define NR_PRODUCTS (sizeof(products)/sizeof(struct board_type))
+#define NR_PRODUCTS ARRAY_SIZE(products)
/* board_id = Subsystem Device ID & Vendor ID
* product = Marketing Name for the board
unsigned int block_size, InquiryData_struct *inq_buff,
drive_info_struct *drv);
static void cciss_getgeometry(int cntl_num);
-
+static void __devinit cciss_interrupt_mode(ctlr_info_t *, struct pci_dev *, __u32);
static void start_io( ctlr_info_t *h);
static int sendcmd( __u8 cmd, int ctlr, void *buff, size_t size,
unsigned int use_unit_num, unsigned int log_unit, __u8 page_code,
h->product_name,
(unsigned long)h->board_id,
h->firm_ver[0], h->firm_ver[1], h->firm_ver[2], h->firm_ver[3],
- (unsigned int)h->intr,
+ (unsigned int)h->intr[SIMPLE_MODE_INT],
h->num_luns,
h->Qdepth, h->commands_outstanding,
h->maxQsinceinit, h->max_outstanding, h->maxSG);
break;
}
- /* Get the frist entry from the Request Q */
+ /* Get the first entry from the Request Q */
removeQ(&(h->reqQ), c);
h->Qdepth--;
start_io(h);
}
+
+static void cciss_softirq_done(struct request *rq)
+{
+ CommandList_struct *cmd = rq->completion_data;
+ ctlr_info_t *h = hba[cmd->ctlr];
+ unsigned long flags;
+ u64bit temp64;
+ int i, ddir;
+
+ if (cmd->Request.Type.Direction == XFER_READ)
+ ddir = PCI_DMA_FROMDEVICE;
+ else
+ ddir = PCI_DMA_TODEVICE;
+
+ /* command did not need to be retried */
+ /* unmap the DMA mapping for all the scatter gather elements */
+ for(i=0; i<cmd->Header.SGList; i++) {
+ temp64.val32.lower = cmd->SG[i].Addr.lower;
+ temp64.val32.upper = cmd->SG[i].Addr.upper;
+ pci_unmap_page(h->pdev, temp64.val, cmd->SG[i].Len, ddir);
+ }
+
+ complete_buffers(rq->bio, rq->errors);
+
+#ifdef CCISS_DEBUG
+ printk("Done with %p\n", rq);
+#endif /* CCISS_DEBUG */
+
+ spin_lock_irqsave(&h->lock, flags);
+ end_that_request_last(rq, rq->errors);
+ cmd_free(h, cmd,1);
+ spin_unlock_irqrestore(&h->lock, flags);
+}
+
/* checks the status of the job and calls complete buffers to mark all
- * buffers for the completed job.
+ * buffers for the completed job. Note that this function does not need
+ * to hold the hba/queue lock.
*/
static inline void complete_command( ctlr_info_t *h, CommandList_struct *cmd,
int timeout)
{
int status = 1;
- int i;
int retry_cmd = 0;
- u64bit temp64;
if (timeout)
status = 0;
resend_cciss_cmd(h,cmd);
return;
}
- /* command did not need to be retried */
- /* unmap the DMA mapping for all the scatter gather elements */
- for(i=0; i<cmd->Header.SGList; i++) {
- temp64.val32.lower = cmd->SG[i].Addr.lower;
- temp64.val32.upper = cmd->SG[i].Addr.upper;
- pci_unmap_page(hba[cmd->ctlr]->pdev,
- temp64.val, cmd->SG[i].Len,
- (cmd->Request.Type.Direction == XFER_READ) ?
- PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE);
- }
- complete_buffers(cmd->rq->bio, status);
-#ifdef CCISS_DEBUG
- printk("Done with %p\n", cmd->rq);
-#endif /* CCISS_DEBUG */
-
- end_that_request_last(cmd->rq, status ? 1 : -EIO);
- cmd_free(h,cmd,1);
+ cmd->rq->completion_data = cmd;
+ cmd->rq->errors = status;
+ blk_complete_request(cmd->rq);
}
/*
return -1;
}
+/* If MSI/MSI-X is supported by the kernel we will try to enable it on
+ * controllers that are capable. If not, we use IO-APIC mode.
+ */
+
+static void __devinit cciss_interrupt_mode(ctlr_info_t *c, struct pci_dev *pdev, __u32 board_id)
+{
+#ifdef CONFIG_PCI_MSI
+ int err;
+ struct msix_entry cciss_msix_entries[4] = {{0,0}, {0,1},
+ {0,2}, {0,3}};
+
+ /* Some boards advertise MSI but don't really support it */
+ if ((board_id == 0x40700E11) ||
+ (board_id == 0x40800E11) ||
+ (board_id == 0x40820E11) ||
+ (board_id == 0x40830E11))
+ goto default_int_mode;
+
+ if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
+ err = pci_enable_msix(pdev, cciss_msix_entries, 4);
+ if (!err) {
+ c->intr[0] = cciss_msix_entries[0].vector;
+ c->intr[1] = cciss_msix_entries[1].vector;
+ c->intr[2] = cciss_msix_entries[2].vector;
+ c->intr[3] = cciss_msix_entries[3].vector;
+ c->msix_vector = 1;
+ return;
+ }
+ if (err > 0) {
+ printk(KERN_WARNING "cciss: only %d MSI-X vectors "
+ "available\n", err);
+ } else {
+ printk(KERN_WARNING "cciss: MSI-X init failed %d\n",
+ err);
+ }
+ }
+ if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) {
+ if (!pci_enable_msi(pdev)) {
+ c->intr[SIMPLE_MODE_INT] = pdev->irq;
+ c->msi_vector = 1;
+ return;
+ } else {
+ printk(KERN_WARNING "cciss: MSI init failed\n");
+ c->intr[SIMPLE_MODE_INT] = pdev->irq;
+ return;
+ }
+ }
+#endif /* CONFIG_PCI_MSI */
+ /* if we get here we're going to use the default interrupt mode */
+default_int_mode:
+ c->intr[SIMPLE_MODE_INT] = pdev->irq;
+ return;
+}
+
static int cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
{
ushort subsystem_vendor_id, subsystem_device_id, command;
printk("board_id = %x\n", board_id);
#endif /* CCISS_DEBUG */
- c->intr = pdev->irq;
+/* If the kernel supports MSI/MSI-X we will try to enable that functionality,
+ * else we use the IO-APIC interrupt assigned to us by system ROM.
+ */
+ cciss_interrupt_mode(c, pdev, board_id);
/*
* Memory base addr is first addr , the second points to the config
c->board_id = board_id;
#ifdef CCISS_DEBUG
- print_cfg_table(c->cfgtable);
+ print_cfg_table(c->cfgtable);
#endif /* CCISS_DEBUG */
for(i=0; i<NR_PRODUCTS; i++) {
* 8 controller support.
*/
if (i < MAX_CTLR_ORIG)
- hba[i]->major = MAJOR_NR + i;
+ hba[i]->major = COMPAQ_CISS_MAJOR + i;
rc = register_blkdev(hba[i]->major, hba[i]->devname);
if(rc == -EBUSY || rc == -EINVAL) {
printk(KERN_ERR
/* make sure the board interrupts are off */
hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_OFF);
- if( request_irq(hba[i]->intr, do_cciss_intr,
+ if( request_irq(hba[i]->intr[SIMPLE_MODE_INT], do_cciss_intr,
SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM,
hba[i]->devname, hba[i])) {
printk(KERN_ERR "cciss: Unable to get irq %d for %s\n",
- hba[i]->intr, hba[i]->devname);
+ hba[i]->intr[SIMPLE_MODE_INT], hba[i]->devname);
goto clean2;
}
hba[i]->cmd_pool_bits = kmalloc(((NR_CMDS+BITS_PER_LONG-1)/BITS_PER_LONG)*sizeof(unsigned long), GFP_KERNEL);
drv->queue = q;
q->backing_dev_info.ra_pages = READ_AHEAD;
- blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
+ blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
- /* This is a hardware imposed limit. */
- blk_queue_max_hw_segments(q, MAXSGENTRIES);
+ /* This is a hardware imposed limit. */
+ blk_queue_max_hw_segments(q, MAXSGENTRIES);
- /* This is a limit in the driver and could be eliminated. */
- blk_queue_max_phys_segments(q, MAXSGENTRIES);
+ /* This is a limit in the driver and could be eliminated. */
+ blk_queue_max_phys_segments(q, MAXSGENTRIES);
- blk_queue_max_sectors(q, 512);
+ blk_queue_max_sectors(q, 512);
+
+ blk_queue_softirq_done(q, cciss_softirq_done);
q->queuedata = hba[i];
sprintf(disk->disk_name, "cciss/c%dd%d", i, j);
clean4:
#ifdef CONFIG_CISS_SCSI_TAPE
- if(hba[i]->scsi_rejects.complete)
- kfree(hba[i]->scsi_rejects.complete);
+ kfree(hba[i]->scsi_rejects.complete);
#endif
kfree(hba[i]->cmd_pool_bits);
if(hba[i]->cmd_pool)
NR_CMDS * sizeof( ErrorInfo_struct),
hba[i]->errinfo_pool,
hba[i]->errinfo_pool_dhandle);
- free_irq(hba[i]->intr, hba[i]);
+ free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]);
clean2:
unregister_blkdev(hba[i]->major, hba[i]->devname);
clean1:
release_io_mem(hba[i]);
- free_hba(i);
hba[i]->busy_initializing = 0;
+ free_hba(i);
return(-1);
}
printk(KERN_WARNING "Error Flushing cache on controller %d\n",
i);
}
- free_irq(hba[i]->intr, hba[i]);
+ free_irq(hba[i]->intr[2], hba[i]);
+
+#ifdef CONFIG_PCI_MSI
+ if (hba[i]->msix_vector)
+ pci_disable_msix(hba[i]->pdev);
+ else if (hba[i]->msi_vector)
+ pci_disable_msi(hba[i]->pdev);
+#endif /* CONFIG_PCI_MSI */
+
pci_set_drvdata(pdev, NULL);
iounmap(hba[i]->vaddr);
cciss_unregister_scsi(i); /* unhook from SCSI subsystem */
printk(KERN_INFO DRIVER_NAME "\n");
/* Register for our PCI devices */
- return pci_module_init(&cciss_pci_driver);
+ return pci_register_driver(&cciss_pci_driver);
}
static void __exit cciss_cleanup(void)
projects / linux-2.6 / blobdiff