# ATM device configuration
#
-menu "ATM drivers"
+menuconfig ATM_DRIVERS
+ bool "ATM drivers"
depends on NETDEVICES && ATM
+ default y
+ ---help---
+ Say Y here to get to see options for Asynchronous Transfer Mode
+ device drivers. This option alone does not add any kernel code.
+
+ If you say N, all options in this submenu will be skipped and disabled.
+
+if ATM_DRIVERS && NETDEVICES && ATM
config ATM_DUMMY
tristate "Dummy ATM driver"
- depends on ATM
help
Dummy ATM driver. Useful for proxy signalling, testing,
and development. If unsure, say N.
config ATM_TCP
tristate "ATM over TCP"
- depends on INET && ATM
+ depends on INET
help
ATM over TCP driver. Useful mainly for development and for
experiments. If unsure, say N.
config ATM_ENI
tristate "Efficient Networks ENI155P"
- depends on PCI && ATM
+ depends on PCI
---help---
Driver for the Efficient Networks ENI155p series and SMC ATM
Power155 155 Mbps ATM adapters. Both, the versions with 512KB and
config ATM_FIRESTREAM
tristate "Fujitsu FireStream (FS50/FS155) "
- depends on PCI && ATM
+ depends on PCI && VIRT_TO_BUS
help
Driver for the Fujitsu FireStream 155 (MB86697) and
FireStream 50 (MB86695) ATM PCI chips.
config ATM_ZATM
tristate "ZeitNet ZN1221/ZN1225"
- depends on PCI && ATM
+ depends on PCI && VIRT_TO_BUS
help
Driver for the ZeitNet ZN1221 (MMF) and ZN1225 (UTP-5) 155 Mbps ATM
adapters.
config ATM_NICSTAR
tristate "IDT 77201 (NICStAR) (ForeRunnerLE)"
- depends on PCI && ATM && !64BIT
+ depends on PCI && !64BIT && VIRT_TO_BUS
help
The NICStAR chipset family is used in a large number of ATM NICs for
25 and for 155 Mbps, including IDT cards and the Fore ForeRunnerLE
config ATM_IDT77252
tristate "IDT 77252 (NICStAR II)"
- depends on PCI && ATM
+ depends on PCI
help
Driver for the IDT 77252 ATM PCI chips.
config ATM_AMBASSADOR
tristate "Madge Ambassador (Collage PCI 155 Server)"
- depends on PCI && ATM
+ depends on PCI && VIRT_TO_BUS
select BITREVERSE
help
This is a driver for ATMizer based ATM card produced by Madge
config ATM_HORIZON
tristate "Madge Horizon [Ultra] (Collage PCI 25 and Collage PCI 155 Client)"
- depends on PCI && ATM
+ depends on PCI && VIRT_TO_BUS
help
This is a driver for the Horizon chipset ATM adapter cards once
produced by Madge Networks Ltd. Say Y (or M to compile as a module
config ATM_IA
tristate "Interphase ATM PCI x575/x525/x531"
- depends on PCI && ATM && !64BIT
+ depends on PCI
---help---
This is a driver for the Interphase (i)ChipSAR adapter cards
which include a variety of variants in term of the size of the
speed of the driver, and the size of your syslog files! When
inactive, they will have only a modest impact on performance.
-config ATM_FORE200E_MAYBE
+config ATM_FORE200E
tristate "FORE Systems 200E-series"
- depends on (PCI || SBUS) && ATM
+ depends on (PCI || SBUS)
+ select FW_LOADER
---help---
This is a driver for the FORE Systems 200E-series ATM adapter
cards. It simultaneously supports PCA-200E and SBA-200E models
on PCI and SBUS hosts. Say Y (or M to compile as a module
named fore_200e) here if you have one of these ATM adapters.
- Note that the driver will actually be compiled only if you
- additionally enable the support for PCA-200E and/or SBA-200E
- cards.
-
See the file <file:Documentation/networking/fore200e.txt> for
further details.
-config ATM_FORE200E_PCA
- bool "PCA-200E support"
- depends on ATM_FORE200E_MAYBE && PCI
- help
- Say Y here if you want your PCA-200E cards to be probed.
-
-config ATM_FORE200E_PCA_DEFAULT_FW
- bool "Use default PCA-200E firmware (normally enabled)"
- depends on ATM_FORE200E_PCA
- help
- Use the default PCA-200E firmware data shipped with the driver.
-
- Normal users do not have to deal with the firmware stuff, so
- they should say Y here.
-
-config ATM_FORE200E_PCA_FW
- string "Pathname of user-supplied binary firmware"
- depends on ATM_FORE200E_PCA && !ATM_FORE200E_PCA_DEFAULT_FW
- default ""
- help
- This defines the pathname of an alternative PCA-200E binary
- firmware image supplied by the user. This pathname may be
- absolute or relative to the drivers/atm directory.
-
- The driver comes with an adequate firmware image, so normal users do
- not have to supply an alternative one. They just say Y to "Use
- default PCA-200E firmware" instead.
-
-config ATM_FORE200E_SBA
- bool "SBA-200E support"
- depends on ATM_FORE200E_MAYBE && SBUS
- help
- Say Y here if you want your SBA-200E cards to be probed.
-
-config ATM_FORE200E_SBA_DEFAULT_FW
- bool "Use default SBA-200E firmware (normally enabled)"
- depends on ATM_FORE200E_SBA
- help
- Use the default SBA-200E firmware data shipped with the driver.
-
- Normal users do not have to deal with the firmware stuff, so
- they should say Y here.
-
-config ATM_FORE200E_SBA_FW
- string "Pathname of user-supplied binary firmware"
- depends on ATM_FORE200E_SBA && !ATM_FORE200E_SBA_DEFAULT_FW
- default ""
- help
- This defines the pathname of an alternative SBA-200E binary
- firmware image supplied by the user. This pathname may be
- absolute or relative to the drivers/atm directory.
-
- The driver comes with an adequate firmware image, so normal users do
- not have to supply an alternative one. They just say Y to "Use
- default SBA-200E firmware", above.
-
config ATM_FORE200E_USE_TASKLET
bool "Defer interrupt work to a tasklet"
- depends on (PCI || SBUS) && (ATM_FORE200E_PCA || ATM_FORE200E_SBA)
+ depends on ATM_FORE200E
default n
help
This defers work to be done by the interrupt handler to a
config ATM_FORE200E_TX_RETRY
int "Maximum number of tx retries"
- depends on (PCI || SBUS) && (ATM_FORE200E_PCA || ATM_FORE200E_SBA)
+ depends on ATM_FORE200E
default "16"
---help---
Specifies the number of times the driver attempts to transmit
config ATM_FORE200E_DEBUG
int "Debugging level (0-3)"
- depends on (PCI || SBUS) && (ATM_FORE200E_PCA || ATM_FORE200E_SBA)
+ depends on ATM_FORE200E
default "0"
help
Specifies the level of debugging messages issued by the driver.
the performances of the driver, and the size of your syslog files!
Keep the debugging level to 0 during normal operations.
-config ATM_FORE200E
- tristate
- depends on (PCI || SBUS) && (ATM_FORE200E_PCA || ATM_FORE200E_SBA)
- default m if ATM_FORE200E_MAYBE!=y
- default y if ATM_FORE200E_MAYBE=y
-
config ATM_HE
tristate "ForeRunner HE Series"
- depends on PCI && ATM
+ depends on PCI
help
This is a driver for the Marconi ForeRunner HE-series ATM adapter
cards. It simultaneously supports the 155 and 622 versions.
Support for the S/UNI-Ultra and S/UNI-622 found in the ForeRunner
HE cards. This driver provides carrier detection some statistics.
-endmenu
-
+endif # ATM