#include <linux/libata.h>
#define DRV_NAME "sata_via"
-#define DRV_VERSION "2.1"
+#define DRV_VERSION "2.2"
enum board_ids_enum {
vt6420,
};
static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg);
-static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
+static int svia_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
+static int svia_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
static void svia_noop_freeze(struct ata_port *ap);
static void vt6420_error_handler(struct ata_port *ap);
static int vt6421_pata_cable_detect(struct ata_port *ap);
{ PCI_VDEVICE(VIA, 0x0591), vt6420 },
{ PCI_VDEVICE(VIA, 0x3149), vt6420 },
{ PCI_VDEVICE(VIA, 0x3249), vt6421 },
+ { PCI_VDEVICE(VIA, 0x5287), vt6420 },
+ { PCI_VDEVICE(VIA, 0x5372), vt6420 },
+ { PCI_VDEVICE(VIA, 0x7372), vt6420 },
{ } /* terminate list */
};
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
- .udma_mask = 0x7f,
+ .udma_mask = ATA_UDMA6,
.port_ops = &vt6420_sata_ops,
};
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
- .udma_mask = 0x7f,
+ .udma_mask = ATA_UDMA6,
.port_ops = &vt6421_sata_ops,
};
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY,
.pio_mask = 0x1f,
.mwdma_mask = 0,
- .udma_mask = 0x7f,
+ .udma_mask = ATA_UDMA6,
.port_ops = &vt6421_pata_ops,
};
MODULE_DEVICE_TABLE(pci, svia_pci_tbl);
MODULE_VERSION(DRV_VERSION);
-static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg)
+static int svia_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
{
if (sc_reg > SCR_CONTROL)
- return 0xffffffffU;
- return ioread32(ap->ioaddr.scr_addr + (4 * sc_reg));
+ return -EINVAL;
+ *val = ioread32(ap->ioaddr.scr_addr + (4 * sc_reg));
+ return 0;
}
-static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
+static int svia_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
{
if (sc_reg > SCR_CONTROL)
- return;
+ return -EINVAL;
iowrite32(val, ap->ioaddr.scr_addr + (4 * sc_reg));
+ return 0;
}
static void svia_noop_freeze(struct ata_port *ap)
if (!(ap->pflags & ATA_PFLAG_LOADING))
goto skip_scr;
- /* Resume phy. This is the old resume sequence from
- * __sata_phy_reset().
- */
+ /* Resume phy. This is the old SATA resume sequence */
svia_scr_write(ap, SCR_CONTROL, 0x300);
- svia_scr_read(ap, SCR_CONTROL); /* flush */
+ svia_scr_read(ap, SCR_CONTROL, &scontrol); /* flush */
/* wait for phy to become ready, if necessary */
do {
msleep(200);
- if ((svia_scr_read(ap, SCR_STATUS) & 0xf) != 1)
+ svia_scr_read(ap, SCR_STATUS, &sstatus);
+ if ((sstatus & 0xf) != 1)
break;
} while (time_before(jiffies, timeout));
/* open code sata_print_link_status() */
- sstatus = svia_scr_read(ap, SCR_STATUS);
- scontrol = svia_scr_read(ap, SCR_CONTROL);
+ svia_scr_read(ap, SCR_STATUS, &sstatus);
+ svia_scr_read(ap, SCR_CONTROL, &scontrol);
online = (sstatus & 0xf) == 0x3;
online ? "up" : "down", sstatus, scontrol);
/* SStatus is read one more time */
- svia_scr_read(ap, SCR_STATUS);
+ svia_scr_read(ap, SCR_STATUS, &sstatus);
if (!online) {
/* tell EH to bail */
struct ata_host *host;
int rc;
- rc = ata_pci_prepare_native_host(pdev, ppi, &host);
+ rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
if (rc)
return rc;
*r_host = host;
return -ENOMEM;
}
- rc = pcim_iomap_regions(pdev, 0x1f, DRV_NAME);
+ rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev, "failed to request/iomap "
"PCI BARs (errno=%d)\n", rc);