libata: cable logic

[linux-2.6] / drivers / ata / sata_svw.c

diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index c8768396e006caac66743802b54793a42690164f..16aa6839aa5a68e435060d7035fbb129c18dc951 100644 (file)
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -233,7 +233,7 @@ static void k2_bmdma_setup_mmio(struct ata_queued_cmd *qc)
 
        /* issue r/w command if this is not a ATA DMA command*/
        if (qc->tf.protocol != ATA_PROT_DMA)
-               ap->ops->exec_command(ap, &qc->tf);
+               ap->ops->sff_exec_command(ap, &qc->tf);
 }
 
 /**
@@ -269,7 +269,7 @@ static void k2_bmdma_start_mmio(struct ata_queued_cmd *qc)
           and the start command. */
        /* issue r/w command if the access is to ATA*/
        if (qc->tf.protocol == ATA_PROT_DMA)
-               ap->ops->exec_command(ap, &qc->tf);
+               ap->ops->sff_exec_command(ap, &qc->tf);
 }
 
 
@@ -334,30 +334,16 @@ static struct scsi_host_template k2_sata_sht = {
 };
 
 
-static const struct ata_port_operations k2_sata_ops = {
-       .tf_load                = k2_sata_tf_load,
-       .tf_read                = k2_sata_tf_read,
-       .check_status           = k2_stat_check_status,
-       .exec_command           = ata_exec_command,
-       .dev_select             = ata_std_dev_select,
+static struct ata_port_operations k2_sata_ops = {
+       .inherits               = &ata_bmdma_port_ops,
+       .sff_tf_load            = k2_sata_tf_load,
+       .sff_tf_read            = k2_sata_tf_read,
+       .sff_check_status       = k2_stat_check_status,
        .check_atapi_dma        = k2_sata_check_atapi_dma,
        .bmdma_setup            = k2_bmdma_setup_mmio,
        .bmdma_start            = k2_bmdma_start_mmio,
-       .bmdma_stop             = ata_bmdma_stop,
-       .bmdma_status           = ata_bmdma_status,
-       .qc_prep                = ata_qc_prep,
-       .qc_issue               = ata_qc_issue_prot,
-       .data_xfer              = ata_data_xfer,
-       .mode_filter            = ata_pci_default_filter,
-       .freeze                 = ata_bmdma_freeze,
-       .thaw                   = ata_bmdma_thaw,
-       .error_handler          = ata_bmdma_error_handler,
-       .post_internal_cmd      = ata_bmdma_post_internal_cmd,
-       .irq_clear              = ata_bmdma_irq_clear,
-       .irq_on                 = ata_irq_on,
        .scr_read               = k2_sata_scr_read,
        .scr_write              = k2_sata_scr_write,
-       .port_start             = ata_sff_port_start,
 };
 
 static const struct ata_port_info k2_port_info[] = {
@@ -506,8 +492,8 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en
        writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
 
        pci_set_master(pdev);
-       return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
-                                &k2_sata_sht);
+       return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+                                IRQF_SHARED, &k2_sata_sht);
 }
 
 /* 0x240 is device ID for Apple K2 device