#include <scsi/scsi_device.h>
#define DRV_NAME "sata_inic162x"
-#define DRV_VERSION "0.2"
+#define DRV_VERSION "0.3"
enum {
MMIO_BAR = 5,
u8 cached_pirq_mask;
};
-static int inic_slave_config(struct scsi_device *sdev)
-{
- /* This controller is braindamaged. dma_boundary is 0xffff
- * like others but it will lock up the whole machine HARD if
- * 65536 byte PRD entry is fed. Reduce maximum segment size.
- */
- blk_queue_max_segment_size(sdev->request_queue, 65536 - 512);
-
- return ata_scsi_slave_config(sdev);
-}
-
static struct scsi_host_template inic_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = inic_slave_config,
+ .slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
[SCR_CONTROL] = 2,
};
-static void __iomem * inic_port_base(struct ata_port *ap)
+static void __iomem *inic_port_base(struct ata_port *ap)
{
return ap->host->iomap[MMIO_BAR] + ap->port_no * PORT_SIZE;
}
writew(ctl, idma_ctl);
}
-static u32 inic_scr_read(struct ata_port *ap, unsigned sc_reg)
+static int inic_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val)
{
void __iomem *scr_addr = ap->ioaddr.scr_addr;
void __iomem *addr;
- u32 val;
if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
- return 0xffffffffU;
+ return -EINVAL;
addr = scr_addr + scr_map[sc_reg] * 4;
- val = readl(scr_addr + scr_map[sc_reg] * 4);
+ *val = readl(scr_addr + scr_map[sc_reg] * 4);
/* this controller has stuck DIAG.N, ignore it */
if (sc_reg == SCR_ERROR)
- val &= ~SERR_PHYRDY_CHG;
- return val;
+ *val &= ~SERR_PHYRDY_CHG;
+ return 0;
}
-static void inic_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
+static int inic_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
{
void __iomem *scr_addr = ap->ioaddr.scr_addr;
void __iomem *addr;
if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
- return;
+ return -EINVAL;
addr = scr_addr + scr_map[sc_reg] * 4;
writel(val, scr_addr + scr_map[sc_reg] * 4);
+ return 0;
}
/*
static void inic_host_intr(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
- struct ata_eh_info *ehi = &ap->eh_info;
+ struct ata_eh_info *ehi = &ap->link.eh_info;
u8 irq_stat;
/* fetch and clear irq */
writeb(irq_stat, port_base + PORT_IRQ_STAT);
if (likely(!(irq_stat & PIRQ_ERR))) {
- struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
+ struct ata_queued_cmd *qc =
+ ata_qc_from_tag(ap, ap->link.active_tag);
if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
ata_chk_status(ap); /* clear ATA interrupt */
* SRST and SControl hardreset don't give valid signature on this
* controller. Only controller specific hardreset mechanism works.
*/
-static int inic_hardreset(struct ata_port *ap, unsigned int *class,
+static int inic_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
+ struct ata_port *ap = link->ap;
void __iomem *port_base = inic_port_base(ap);
void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
- const unsigned long *timing = sata_ehc_deb_timing(&ap->eh_context);
+ const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
u16 val;
int rc;
msleep(1);
writew(val & ~IDMA_CTL_RST_ATA, idma_ctl);
- rc = sata_phy_resume(ap, timing, deadline);
+ rc = sata_link_resume(link, timing, deadline);
if (rc) {
- ata_port_printk(ap, KERN_WARNING, "failed to resume "
+ ata_link_printk(link, KERN_WARNING, "failed to resume "
"link after reset (errno=%d)\n", rc);
return rc;
}
*class = ATA_DEV_NONE;
- if (ata_port_online(ap)) {
+ if (ata_link_online(link)) {
struct ata_taskfile tf;
/* wait a while before checking status */
- msleep(150);
+ ata_wait_after_reset(ap, deadline);
rc = ata_wait_ready(ap, deadline);
/* link occupied, -ENODEV too is an error */
if (rc) {
- ata_port_printk(ap, KERN_WARNING, "device not ready "
+ ata_link_printk(link, KERN_WARNING, "device not ready "
"after hardreset (errno=%d)\n", rc);
return rc;
}
}
static struct ata_port_operations inic_port_ops = {
- .port_disable = ata_port_disable,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.irq_clear = inic_irq_clear,
.irq_on = ata_irq_on,
- .irq_ack = ata_irq_ack,
.qc_prep = ata_qc_prep,
.qc_issue = inic_qc_issue,
};
static struct ata_port_info inic_port_info = {
- /* For some reason, ATA_PROT_ATAPI is broken on this
+ /* For some reason, ATAPI_PROT_PIO is broken on this
* controller, and no, PIO_POLLING does't fix it. It somehow
* manages to report the wrong ireason and ignoring ireason
* results in machine lock up. Tell libata to always prefer
host->iomap = iomap = pcim_iomap_table(pdev);
for (i = 0; i < NR_PORTS; i++) {
- struct ata_ioports *port = &host->ports[i]->ioaddr;
- void __iomem *port_base = iomap[MMIO_BAR] + i * PORT_SIZE;
+ struct ata_port *ap = host->ports[i];
+ struct ata_ioports *port = &ap->ioaddr;
+ unsigned int offset = i * PORT_SIZE;
port->cmd_addr = iomap[2 * i];
port->altstatus_addr =
port->ctl_addr = (void __iomem *)
((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS);
- port->scr_addr = port_base + PORT_SCR;
+ port->scr_addr = iomap[MMIO_BAR] + offset + PORT_SCR;
ata_std_ports(port);
+
+ ata_port_pbar_desc(ap, MMIO_BAR, -1, "mmio");
+ ata_port_pbar_desc(ap, MMIO_BAR, offset, "port");
+ ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
+ (unsigned long long)pci_resource_start(pdev, 2 * i),
+ (unsigned long long)pci_resource_start(pdev, (2 * i + 1)) |
+ ATA_PCI_CTL_OFS);
}
hpriv->cached_hctl = readw(iomap[MMIO_BAR] + HOST_CTL);
return rc;
}
+ /*
+ * This controller is braindamaged. dma_boundary is 0xffff
+ * like others but it will lock up the whole machine HARD if
+ * 65536 byte PRD entry is fed. Reduce maximum segment size.
+ */
+ rc = pci_set_dma_max_seg_size(pdev, 65536 - 512);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "failed to set the maximum segment size.\n");
+ return rc;
+ }
+
rc = init_controller(iomap[MMIO_BAR], hpriv->cached_hctl);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,