[PATCH] libata: Add support for the MPC52xx ATA controller

[linux-2.6] / drivers / ata / pata_via.c

diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index ff93e8f71cf8e8900d1cb070c5aa0f1d6a5e3477..f0b6c3b7142931a30cb3524a033fb021393a2c47 100644 (file)
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -23,6 +23,7 @@
  *     VIA VT8233c     -       UDMA100
  *     VIA VT8235      -       UDMA133
  *     VIA VT8237      -       UDMA133
+ *     VIA VT8237S     -       UDMA133
  *     VIA VT8251      -       UDMA133
  *
  *     Most registers remain compatible across chips. Others start reserved
@@ -61,7 +62,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_via"
-#define DRV_VERSION "0.2.0"
+#define DRV_VERSION "0.2.1"
 
 /*
  *     The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
@@ -95,6 +96,7 @@ static const struct via_isa_bridge {
        u8 rev_max;
        u16 flags;
 } via_isa_bridges[] = {
+       { "vt8237s",    PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
        { "vt8251",     PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
        { "cx700",      PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
        { "vt6410",     PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES},
@@ -395,7 +397,7 @@ static void via_config_fifo(struct pci_dev *pdev, unsigned int flags)
        enable &= 3;
        
        if (flags & VIA_SET_FIFO) {
-               u8 fifo_setting[4] = {0x00, 0x60, 0x00, 0x20};
+               static const u8 fifo_setting[4] = {0x00, 0x60, 0x00, 0x20};
                u8 fifo;
 
                pci_read_config_byte(pdev, 0x43, &fifo);