if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
-}
-
-
-static void sl82c105_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, sl82c105_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
struct ata_port *alt = host->ports[1 ^ qc->ap->port_no];
int rc;
- /* First apply the usual rules */
+ /* First apply the usual rules */
rc = ata_std_qc_defer(qc);
if (rc != 0)
return rc;
};
static struct ata_port_operations sl82c105_port_ops = {
- .set_piomode = sl82c105_set_piomode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = sl82c105_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
+ .inherits = &ata_bmdma_port_ops,
+ .qc_defer = sl82c105_qc_defer,
.bmdma_start = sl82c105_bmdma_start,
.bmdma_stop = sl82c105_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_defer = sl82c105_qc_defer,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .cable_detect = ata_cable_40wire,
+ .set_piomode = sl82c105_set_piomode,
+ .prereset = sl82c105_pre_reset,
};
/**
static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info_dma = {
- .sht = &sl82c105_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &sl82c105_port_ops
};
static const struct ata_port_info info_early = {
- .sht = &sl82c105_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.port_ops = &sl82c105_port_ops
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(dev, 0x40, val);
- return ata_pci_init_one(dev, ppi);
+ return ata_pci_sff_init_one(dev, ppi, &sl82c105_sht, NULL);
}
static const struct pci_device_id sl82c105[] = {