#define DRV_NAME "pata_pcmcia"
-#define DRV_VERSION "0.3.2"
+#define DRV_VERSION "0.3.3"
/*
* Private data structure to glue stuff together
/**
* ata_data_xfer_8bit - Transfer data by 8bit PIO
- * @adev: device to target
+ * @dev: device to target
* @buf: data buffer
* @buflen: buffer length
- * @write_data: read/write
+ * @rw: read/write
*
* Transfer data from/to the device data register by 8 bit PIO.
*
* Inherited from caller.
*/
-static void ata_data_xfer_8bit(struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int write_data)
+static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
+ unsigned char *buf, unsigned int buflen, int rw)
{
- struct ata_port *ap = adev->link->ap;
- if (write_data)
- iowrite8_rep(ap->ioaddr.data_addr, buf, buflen);
- else
+ struct ata_port *ap = dev->link->ap;
+
+ if (rw == READ)
ioread8_rep(ap->ioaddr.data_addr, buf, buflen);
+ else
+ iowrite8_rep(ap->ioaddr.data_addr, buf, buflen);
+
+ return buflen;
}
static struct scsi_host_template pcmcia_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations pcmcia_port_ops = {
- .set_mode = pcmcia_set_mode,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .inherits = &ata_sff_port_ops,
+ .sff_data_xfer = ata_sff_data_xfer_noirq,
.cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer_noirq,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .set_mode = pcmcia_set_mode,
};
static struct ata_port_operations pcmcia_8bit_port_ops = {
- .set_mode = pcmcia_set_mode_8bit,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .inherits = &ata_sff_port_ops,
+ .sff_data_xfer = ata_data_xfer_8bit,
.cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer_8bit,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .set_mode = pcmcia_set_mode_8bit,
};
#define CS_CHECK(fn, ret) \
/**
* pcmcia_init_one - attach a PCMCIA interface
* @pdev: pcmcia device
- * @ops: operations for this device
*
* Register a PCMCIA IDE interface. Such interfaces are PIO 0 and
* shared IRQ.
cistpl_cftable_entry_t dflt;
} *stk = NULL;
cistpl_cftable_entry_t *cfg;
- int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM;
+ int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p;
unsigned long io_base, ctl_base;
void __iomem *io_addr, *ctl_addr;
+ int n_ports = 1;
struct ata_port_operations *ops = &pcmcia_port_ops;
/* FIXME: Could be more ports at base + 0x10 but we only deal with
one right now */
if (pdev->io.NumPorts1 >= 0x20)
- printk(KERN_WARNING DRV_NAME ": second channel not yet supported.\n");
+ n_ports = 2;
if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620)
ops = &pcmcia_8bit_port_ops;
* sane.
*/
ret = -ENOMEM;
- host = ata_host_alloc(&pdev->dev, 1);
+ host = ata_host_alloc(&pdev->dev, n_ports);
if (!host)
goto failed;
- ap = host->ports[0];
- ap->ops = ops;
- ap->pio_mask = 1; /* ISA so PIO 0 cycles */
- ap->flags |= ATA_FLAG_SLAVE_POSS;
- ap->ioaddr.cmd_addr = io_addr;
- ap->ioaddr.altstatus_addr = ctl_addr;
- ap->ioaddr.ctl_addr = ctl_addr;
- ata_std_ports(&ap->ioaddr);
+ for (p = 0; p < n_ports; p++) {
+ ap = host->ports[p];
- ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base);
+ ap->ops = ops;
+ ap->pio_mask = 1; /* ISA so PIO 0 cycles */
+ ap->flags |= ATA_FLAG_SLAVE_POSS;
+ ap->ioaddr.cmd_addr = io_addr + 0x10 * p;
+ ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p;
+ ap->ioaddr.ctl_addr = ctl_addr + 0x10 * p;
+ ata_sff_std_ports(&ap->ioaddr);
+
+ ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base);
+ }
/* activate */
- ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_interrupt,
+ ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_sff_interrupt,
IRQF_SHARED, &pcmcia_sht);
if (ret)
goto failed;