/**
* marvell_pre_reset - check for 40/80 pin
- * @ap: Port
+ * @link: link
* @deadline: deadline jiffies for the operation
*
* Perform the PATA port setup we need.
*/
-static int marvell_pre_reset(struct ata_port *ap, unsigned long deadline)
+static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
{
+ struct ata_port *ap = link->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u32 devices;
void __iomem *barp;
return -ENOMEM;
printk("BAR5:");
for(i = 0; i <= 0x0F; i++)
- printk("%02X:%02X ", i, readb(barp + i));
+ printk("%02X:%02X ", i, ioread8(barp + i));
printk("\n");
- devices = readl(barp + 0x0C);
+ devices = ioread32(barp + 0x0C);
pci_iounmap(pdev, barp);
if ((pdev->device == 0x6145) && (ap->port_no == 0) &&
(!(devices & 0x10))) /* PATA enable ? */
return -ENOENT;
- return ata_std_prereset(ap, deadline);
+ return ata_std_prereset(link, deadline);
}
static int marvell_cable_detect(struct ata_port *ap)
static void marvell_error_handler(struct ata_port *ap)
{
- return ata_bmdma_drive_eh(ap, marvell_pre_reset, ata_std_softreset,
- NULL, ata_std_postreset);
+ ata_bmdma_drive_eh(ap, marvell_pre_reset, ata_std_softreset, NULL,
+ ata_std_postreset);
}
/* No PIO or DMA methods needed for this device */
};
static const struct ata_port_operations marvell_ops = {
- .port_disable = ata_port_disable,
-
/* Task file is PCI ATA format, use helpers */
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .irq_ack = ata_irq_ack,
/* Generic PATA PCI ATA helpers */
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static const struct pci_device_id marvell_pci_tbl[] = {
{ PCI_DEVICE(0x11AB, 0x6101), },
+ { PCI_DEVICE(0x11AB, 0x6121), },
+ { PCI_DEVICE(0x11AB, 0x6123), },
{ PCI_DEVICE(0x11AB, 0x6145), },
{ } /* terminate list */
};