it821x_program(ap, adev, itdev->pio[adev->devno]);
itdev->last_device = device;
}
- ata_std_dev_select(ap, device);
+ ata_sff_dev_select(ap, device);
}
/**
- * it821x_smart_qc_issue_prot - wrap qc issue prot
+ * it821x_smart_qc_issue - wrap qc issue prot
* @qc: command
*
* Wrap the command issue sequence for the IT821x. We need to
* usual happenings kick off
*/
-static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int it821x_smart_qc_issue(struct ata_queued_cmd *qc)
{
switch(qc->tf.command)
{
case ATA_CMD_ID_ATA:
/* Arguably should just no-op this one */
case ATA_CMD_SET_FEATURES:
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
printk(KERN_DEBUG "it821x: can't process command 0x%02X\n", qc->tf.command);
return AC_ERR_DEV;
}
/**
- * it821x_passthru_qc_issue_prot - wrap qc issue prot
+ * it821x_passthru_qc_issue - wrap qc issue prot
* @qc: command
*
* Wrap the command issue sequence for the IT821x. We need to
* usual happenings kick off
*/
-static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int it821x_passthru_qc_issue(struct ata_queued_cmd *qc)
{
it821x_passthru_dev_select(qc->ap, qc->dev->devno);
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
/**
};
static struct ata_port_operations it821x_smart_port_ops = {
- .set_mode = it821x_smart_set_mode,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .mode_filter = ata_pci_default_filter,
+ .inherits = &ata_bmdma_port_ops,
- .check_status = ata_check_status,
.check_atapi_dma= it821x_check_atapi_dma,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
- .dev_config = it821x_dev_config,
+ .qc_issue = it821x_smart_qc_issue,
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = it821x_ident_hack,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = it821x_smart_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
+ .set_mode = it821x_smart_set_mode,
+ .dev_config = it821x_dev_config,
.port_start = it821x_port_start,
};
static struct ata_port_operations it821x_passthru_port_ops = {
- .set_piomode = it821x_passthru_set_piomode,
- .set_dmamode = it821x_passthru_set_dmamode,
- .mode_filter = ata_pci_default_filter,
+ .inherits = &ata_bmdma_port_ops,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
.check_atapi_dma= it821x_check_atapi_dma,
- .dev_select = it821x_passthru_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_unknown,
-
- .bmdma_setup = ata_bmdma_setup,
+ .sff_dev_select = it821x_passthru_dev_select,
.bmdma_start = it821x_passthru_bmdma_start,
.bmdma_stop = it821x_passthru_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = it821x_passthru_qc_issue_prot,
+ .qc_issue = it821x_passthru_qc_issue,
- .data_xfer = ata_data_xfer,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_handler = ata_interrupt,
- .irq_on = ata_irq_on,
+ .cable_detect = ata_cable_unknown,
+ .set_piomode = it821x_passthru_set_piomode,
+ .set_dmamode = it821x_passthru_set_dmamode,
.port_start = it821x_port_start,
};
u8 conf;
static const struct ata_port_info info_smart = {
- .sht = &it821x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &it821x_smart_port_ops
};
static const struct ata_port_info info_passthru = {
- .sht = &it821x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
else
ppi[0] = &info_smart;
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL);
}
#ifdef CONFIG_PM