]> err.no Git - linux-2.6/blobdiff - drivers/ata/pata_cypress.c
Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes
[linux-2.6] / drivers / ata / pata_cypress.c
index 07fa1ab363155592a2a6f620642967c7e8f5760f..2ff62608ae37e82069a94dfca757fb0accd09fec 100644 (file)
@@ -62,14 +62,14 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev)
                return;
        }
 
-       time_16 = FIT(t.recover, 0, 15) | (FIT(t.active, 0, 15) << 4);
-       time_8 = FIT(t.act8b, 0, 15) | (FIT(t.rec8b, 0, 15) << 4);
+       time_16 = clamp_val(t.recover, 0, 15) | (clamp_val(t.active, 0, 15) << 4);
+       time_8 = clamp_val(t.act8b, 0, 15) | (clamp_val(t.rec8b, 0, 15) << 4);
 
        if (adev->devno == 0) {
                pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
 
                addr &= ~0x0F;  /* Mask bits */
-               addr |= FIT(t.setup, 0, 15);
+               addr |= clamp_val(t.setup, 0, 15);
 
                pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
                pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16);
@@ -79,7 +79,7 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev)
                pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
 
                addr &= ~0xF0;  /* Mask bits */
-               addr |= (FIT(t.setup, 0, 15) << 4);
+               addr |= (clamp_val(t.setup, 0, 15) << 4);
 
                pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
                pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16);
@@ -114,43 +114,15 @@ static struct scsi_host_template cy82c693_sht = {
 };
 
 static struct ata_port_operations cy82c693_port_ops = {
+       .inherits       = &ata_bmdma_port_ops,
+       .cable_detect   = ata_cable_40wire,
        .set_piomode    = cy82c693_set_piomode,
        .set_dmamode    = cy82c693_set_dmamode,
-       .mode_filter    = ata_pci_default_filter,
-
-       .tf_load        = ata_tf_load,
-       .tf_read        = ata_tf_read,
-       .check_status   = ata_check_status,
-       .exec_command   = ata_exec_command,
-       .dev_select     = ata_std_dev_select,
-
-       .freeze         = ata_bmdma_freeze,
-       .thaw           = ata_bmdma_thaw,
-       .error_handler  = ata_bmdma_error_handler,
-       .post_internal_cmd = ata_bmdma_post_internal_cmd,
-       .cable_detect   = ata_cable_40wire,
-
-       .bmdma_setup    = ata_bmdma_setup,
-       .bmdma_start    = ata_bmdma_start,
-       .bmdma_stop     = ata_bmdma_stop,
-       .bmdma_status   = ata_bmdma_status,
-
-       .qc_prep        = ata_qc_prep,
-       .qc_issue       = ata_qc_issue_prot,
-
-       .data_xfer      = ata_data_xfer,
-
-       .irq_handler    = ata_interrupt,
-       .irq_clear      = ata_bmdma_irq_clear,
-       .irq_on         = ata_irq_on,
-
-       .port_start     = ata_sff_port_start,
 };
 
 static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
        static const struct ata_port_info info = {
-               .sht = &cy82c693_sht,
                .flags = ATA_FLAG_SLAVE_POSS,
                .pio_mask = 0x1f,
                .mwdma_mask = 0x07,
@@ -164,7 +136,7 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i
        if (PCI_FUNC(pdev->devfn) != 1)
                return -ENODEV;
 
-       return ata_pci_init_one(pdev, ppi);
+       return ata_pci_sff_init_one(pdev, ppi, &cy82c693_sht, NULL);
 }
 
 static const struct pci_device_id cy82c693[] = {