return tmp;
}
-u8 ata_dummy_irq_on (struct ata_port *ap) { return 0; }
-
-/**
- * ata_irq_ack - Acknowledge a device interrupt.
- * @ap: Port on which interrupts are enabled.
- *
- * Wait up to 10 ms for legacy IDE device to become idle (BUSY
- * or BUSY+DRQ clear). Obtain dma status and port status from
- * device. Clear the interrupt. Return port status.
- *
- * LOCKING:
- */
-
-u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq)
-{
- unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
- u8 host_stat = 0, post_stat = 0, status;
-
- status = ata_busy_wait(ap, bits, 1000);
- if (status & bits)
- if (ata_msg_err(ap))
- printk(KERN_ERR "abnormal status 0x%X\n", status);
-
- if (ap->ioaddr.bmdma_addr) {
- /* get controller status; clear intr, err bits */
- host_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
- iowrite8(host_stat | ATA_DMA_INTR | ATA_DMA_ERR,
- ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
-
- post_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
- }
- if (ata_msg_intr(ap))
- printk(KERN_INFO "%s: irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n",
- __FUNCTION__,
- host_stat, post_stat, status);
- return status;
-}
-
-u8 ata_dummy_irq_ack(struct ata_port *ap, unsigned int chk_drq) { return 0; }
-
/**
* ata_tf_load - send taskfile registers to host controller
* @ap: Port to which output is sent
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- tf->command = ata_check_status(ap);
+ tf->command = ata_chk_status(ap);
tf->feature = ioread8(ioaddr->error_addr);
tf->nsect = ioread8(ioaddr->nsect_addr);
tf->lbal = ioread8(ioaddr->lbal_addr);
* LOCKING:
* spin_lock_irqsave(host lock)
*/
-void ata_bmdma_start (struct ata_queued_cmd *qc)
+void ata_bmdma_start(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
u8 dmactl;
ata_reset_fn_t hardreset;
hardreset = NULL;
- if (sata_scr_valid(ap))
+ if (sata_scr_valid(&ap->link))
hardreset = sata_std_hardreset;
ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset,
if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) &&
(ioread8(bmdma + 2) & 0x80))
host->flags |= ATA_HOST_SIMPLEX;
+
+ ata_port_desc(ap, "bmdma 0x%llx",
+ (unsigned long long)pci_resource_start(pdev, 4) + 8 * i);
}
return 0;
((unsigned long)iomap[base + 1] | ATA_PCI_CTL_OFS);
ata_std_ports(&ap->ioaddr);
+ ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
+ (unsigned long long)pci_resource_start(pdev, base),
+ (unsigned long long)pci_resource_start(pdev, base + 1));
+
mask |= 1 << i;
}
IRQF_SHARED, DRV_NAME, host);
if (rc)
goto err_out;
- host->irq = pdev->irq;
+
+ ata_port_desc(host->ports[0], "irq %d", pdev->irq);
+ ata_port_desc(host->ports[1], "irq %d", pdev->irq);
} else {
if (!ata_port_is_dummy(host->ports[0])) {
- host->irq = ATA_PRIMARY_IRQ(pdev);
- rc = devm_request_irq(dev, host->irq,
+ rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev),
pi->port_ops->irq_handler,
IRQF_SHARED, DRV_NAME, host);
if (rc)
goto err_out;
+
+ ata_port_desc(host->ports[0], "irq %d",
+ ATA_PRIMARY_IRQ(pdev));
}
if (!ata_port_is_dummy(host->ports[1])) {
- host->irq2 = ATA_SECONDARY_IRQ(pdev);
- rc = devm_request_irq(dev, host->irq2,
+ rc = devm_request_irq(dev, ATA_SECONDARY_IRQ(pdev),
pi->port_ops->irq_handler,
IRQF_SHARED, DRV_NAME, host);
if (rc)
goto err_out;
+
+ ata_port_desc(host->ports[1], "irq %d",
+ ATA_SECONDARY_IRQ(pdev));
}
}
* @pdev: PCI device
*
* Some PCI ATA devices report simplex mode but in fact can be told to
- * enter non simplex mode. This implements the neccessary logic to
+ * enter non simplex mode. This implements the necessary logic to
* perform the task on such devices. Calling it on other devices will
* have -undefined- behaviour.
*/
/* Filter out DMA modes if the device has been configured by
the BIOS as PIO only */
- if (adev->link->ap->ioaddr.bmdma_addr == 0)
+ if (adev->link->ap->ioaddr.bmdma_addr == NULL)
xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
return xfer_mask;
}