const unsigned long sata_deb_timing_hotplug[] = { 25, 500, 2000 };
const unsigned long sata_deb_timing_long[] = { 100, 2000, 5000 };
+const struct ata_port_operations ata_base_port_ops = {
+ .irq_clear = ata_noop_irq_clear,
+ .prereset = ata_std_prereset,
+ .hardreset = sata_std_hardreset,
+ .postreset = ata_std_postreset,
+ .error_handler = ata_std_error_handler,
+};
+
+const struct ata_port_operations sata_port_ops = {
+ .inherits = &ata_base_port_ops,
+
+ .qc_defer = ata_std_qc_defer,
+ .dev_select = ata_noop_dev_select,
+};
+
+const struct ata_port_operations sata_pmp_port_ops = {
+ .inherits = &sata_port_ops,
+
+ .pmp_prereset = sata_pmp_std_prereset,
+ .pmp_hardreset = sata_pmp_std_hardreset,
+ .pmp_postreset = sata_pmp_std_postreset,
+ .error_handler = sata_pmp_error_handler,
+};
+
+const struct ata_port_operations ata_sff_port_ops = {
+ .inherits = &ata_base_port_ops,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .softreset = ata_std_softreset,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .dev_select = ata_std_dev_select,
+ .check_status = ata_check_status,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .exec_command = ata_exec_command,
+ .data_xfer = ata_data_xfer,
+ .irq_on = ata_irq_on,
+
+ .port_start = ata_sff_port_start,
+};
+
+const struct ata_port_operations ata_bmdma_port_ops = {
+ .inherits = &ata_sff_port_ops,
+
+ .mode_filter = ata_pci_default_filter,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+ .irq_clear = ata_bmdma_irq_clear,
+};
+
static unsigned int ata_dev_init_params(struct ata_device *dev,
u16 heads, u16 sectors);
static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
static int ata_force_tbl_size;
static char ata_force_param_buf[PAGE_SIZE] __initdata;
-module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0444);
+/* param_buf is thrown away after initialization, disallow read */
+module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0);
MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/kernel-parameters.txt for details)");
int atapi_enabled = 1;
}
}
+/**
+ * atapi_cmd_type - Determine ATAPI command type from SCSI opcode
+ * @opcode: SCSI opcode
+ *
+ * Determine ATAPI command type from @opcode.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * ATAPI_{READ|WRITE|READ_CD|PASS_THRU|MISC}
+ */
+int atapi_cmd_type(u8 opcode)
+{
+ switch (opcode) {
+ case GPCMD_READ_10:
+ case GPCMD_READ_12:
+ return ATAPI_READ;
+
+ case GPCMD_WRITE_10:
+ case GPCMD_WRITE_12:
+ case GPCMD_WRITE_AND_VERIFY_10:
+ return ATAPI_WRITE;
+
+ case GPCMD_READ_CD:
+ case GPCMD_READ_CD_MSF:
+ return ATAPI_READ_CD;
+
+ case ATA_16:
+ case ATA_12:
+ if (atapi_passthru16)
+ return ATAPI_PASS_THRU;
+ /* fall thru */
+ default:
+ return ATAPI_MISC;
+ }
+}
+
/**
* ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
* @tf: Taskfile to convert
void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy)
{
ap->pm_policy = policy;
- ap->link.eh_info.action |= ATA_EHI_LPM;
+ ap->link.eh_info.action |= ATA_EH_LPM;
ap->link.eh_info.flags |= ATA_EHI_NO_AUTOPSY;
ata_port_schedule_eh(ap);
}
/* read native max address */
rc = ata_read_native_max_address(dev, &native_sectors);
if (rc) {
- /* If HPA isn't going to be unlocked, skip HPA
- * resizing from the next try.
+ /* If device aborted the command or HPA isn't going to
+ * be unlocked, skip HPA resizing.
*/
- if (!ata_ignore_hpa) {
+ if (rc == -EACCES || !ata_ignore_hpa) {
ata_dev_printk(dev, KERN_WARNING, "HPA support seems "
- "broken, will skip HPA handling\n");
+ "broken, skipping HPA handling\n");
dev->horkage |= ATA_HORKAGE_BROKEN_HPA;
/* we can continue if device aborted the command */
cancel_rearming_delayed_work(&ap->port_task);
if (ata_msg_ctl(ap))
- ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __FUNCTION__);
+ ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __func__);
}
static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
int rc;
if (ata_msg_ctl(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
+ ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
- ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */
retry:
ata_tf_init(dev, &tf);
id, sizeof(id[0]) * ATA_ID_WORDS, 0);
if (err_mask) {
if (err_mask & AC_ERR_NODEV_HINT) {
- DPRINTK("ata%u.%d: NODEV after polling detection\n",
- ap->print_id, dev->devno);
+ ata_dev_printk(dev, KERN_DEBUG,
+ "NODEV after polling detection\n");
return -ENOENT;
}
- /* Device or controller might have reported the wrong
- * device class. Give a shot at the other IDENTIFY if
- * the current one is aborted by the device.
- */
- if (may_fallback &&
- (err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
- may_fallback = 0;
+ if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
+ /* Device or controller might have reported
+ * the wrong device class. Give a shot at the
+ * other IDENTIFY if the current one is
+ * aborted by the device.
+ */
+ if (may_fallback) {
+ may_fallback = 0;
- if (class == ATA_DEV_ATA)
- class = ATA_DEV_ATAPI;
- else
- class = ATA_DEV_ATA;
- goto retry;
+ if (class == ATA_DEV_ATA)
+ class = ATA_DEV_ATAPI;
+ else
+ class = ATA_DEV_ATA;
+ goto retry;
+ }
+
+ /* Control reaches here iff the device aborted
+ * both flavors of IDENTIFYs which happens
+ * sometimes with phantom devices.
+ */
+ ata_dev_printk(dev, KERN_DEBUG,
+ "both IDENTIFYs aborted, assuming NODEV\n");
+ return -ENOENT;
}
rc = -EIO;
if (!ata_dev_enabled(dev) && ata_msg_info(ap)) {
ata_dev_printk(dev, KERN_INFO, "%s: ENTER/EXIT -- nodev\n",
- __FUNCTION__);
+ __func__);
return 0;
}
if (ata_msg_probe(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
+ ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
/* set horkage */
dev->horkage |= ata_dev_blacklisted(dev);
ata_dev_printk(dev, KERN_DEBUG,
"%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x "
"85:%04x 86:%04x 87:%04x 88:%04x\n",
- __FUNCTION__,
+ __func__,
id[49], id[82], id[83], id[84],
id[85], id[86], id[87], id[88]);
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n",
- __FUNCTION__, ata_chk_status(ap));
+ __func__, ata_chk_status(ap));
return 0;
err_out_nosup:
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG,
- "%s: EXIT, err\n", __FUNCTION__);
+ "%s: EXIT, err\n", __func__);
return rc;
}
specific sequence bass-ackwards so that PDIAG- is released by
the slave device */
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_link_for_each_dev_reverse(dev, &ap->link) {
if (tries[dev->devno])
dev->class = classes[dev->devno];
const unsigned long *timing = sata_ehc_deb_timing(ehc);
int rc;
- /* handle link resume */
- if ((ehc->i.flags & ATA_EHI_RESUME_LINK) &&
- (link->flags & ATA_LFLAG_HRST_TO_RESUME))
- ehc->i.action |= ATA_EH_HARDRESET;
-
- /* Some PMPs don't work with only SRST, force hardreset if PMP
- * is supported.
- */
- if (ap->flags & ATA_FLAG_PMP)
- ehc->i.action |= ATA_EH_HARDRESET;
-
/* if we're about to do hardreset, nothing more to do */
if (ehc->i.action & ATA_EH_HARDRESET)
return 0;
"link for reset (errno=%d)\n", rc);
}
- /* Wait for !BSY if the controller can wait for the first D2H
- * Reg FIS and we don't know that no device is attached.
- */
- if (!(link->flags & ATA_LFLAG_SKIP_D2H_BSY) && !ata_link_offline(link)) {
+ /* wait for !BSY if we don't know that no device is attached */
+ if (!ata_link_offline(link)) {
rc = ata_wait_ready(ap, deadline);
if (rc && rc != -ENODEV) {
ata_link_printk(link, KERN_WARNING, "device not ready "
if (ata_sg_setup(qc))
goto sg_err;
- /* if device is sleeping, schedule softreset and abort the link */
+ /* if device is sleeping, schedule reset and abort the link */
if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) {
- link->eh_info.action |= ATA_EH_SOFTRESET;
+ link->eh_info.action |= ATA_EH_RESET;
ata_ehi_push_desc(&link->eh_info, "waking up from sleep");
ata_link_abort(link);
return;
*/
void ata_host_resume(struct ata_host *host)
{
- ata_host_request_pm(host, PMSG_ON, ATA_EH_SOFTRESET,
+ ata_host_request_pm(host, PMSG_ON, ATA_EH_RESET,
ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
host->dev->power.power_state = PMSG_ON;
if (!host->ops && (pi->port_ops != &ata_dummy_port_ops))
host->ops = pi->port_ops;
- if (!host->private_data && pi->private_data)
- host->private_data = pi->private_data;
}
return host;
host->ops->host_stop(host);
}
+/**
+ * ata_finalize_port_ops - finalize ata_port_operations
+ * @ops: ata_port_operations to finalize
+ *
+ * An ata_port_operations can inherit from another ops and that
+ * ops can again inherit from another. This can go on as many
+ * times as necessary as long as there is no loop in the
+ * inheritance chain.
+ *
+ * Ops tables are finalized when the host is started. NULL or
+ * unspecified entries are inherited from the closet ancestor
+ * which has the method and the entry is populated with it.
+ * After finalization, the ops table directly points to all the
+ * methods and ->inherits is no longer necessary and cleared.
+ *
+ * Using ATA_OP_NULL, inheriting ops can force a method to NULL.
+ *
+ * LOCKING:
+ * None.
+ */
+static void ata_finalize_port_ops(struct ata_port_operations *ops)
+{
+ static spinlock_t lock = SPIN_LOCK_UNLOCKED;
+ const struct ata_port_operations *cur;
+ void **begin = (void **)ops;
+ void **end = (void **)&ops->inherits;
+ void **pp;
+
+ if (!ops || !ops->inherits)
+ return;
+
+ spin_lock(&lock);
+
+ for (cur = ops->inherits; cur; cur = cur->inherits) {
+ void **inherit = (void **)cur;
+
+ for (pp = begin; pp < end; pp++, inherit++)
+ if (!*pp)
+ *pp = *inherit;
+ }
+
+ for (pp = begin; pp < end; pp++)
+ if (IS_ERR(*pp))
+ *pp = NULL;
+
+ ops->inherits = NULL;
+
+ spin_unlock(&lock);
+}
+
/**
* ata_host_start - start and freeze ports of an ATA host
* @host: ATA host to start ports for
if (host->flags & ATA_HOST_STARTED)
return 0;
+ ata_finalize_port_ops(host->ops);
+
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
+ ata_finalize_port_ops(ap->ops);
+
if (!host->ops && !ata_port_is_dummy(ap))
host->ops = ap->ops;
*/
/* KILLME - the only user left is ipr */
void ata_host_init(struct ata_host *host, struct device *dev,
- unsigned long flags, const struct ata_port_operations *ops)
+ unsigned long flags, struct ata_port_operations *ops)
{
spin_lock_init(&host->lock);
host->dev = dev;
/* kick EH for boot probing */
spin_lock_irqsave(ap->lock, flags);
- ehi->probe_mask =
- (1 << ata_link_max_devices(&ap->link)) - 1;
- ehi->action |= ATA_EH_SOFTRESET;
+ ehi->probe_mask |= ATA_ALL_DEVICES;
+ ehi->action |= ATA_EH_RESET;
ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
ap->pflags &= ~ATA_PFLAG_INITIALIZING;
return AC_ERR_SYSTEM;
}
-const struct ata_port_operations ata_dummy_port_ops = {
+struct ata_port_operations ata_dummy_port_ops = {
.check_status = ata_dummy_check_status,
.check_altstatus = ata_dummy_check_status,
.dev_select = ata_noop_dev_select,
EXPORT_SYMBOL_GPL(sata_deb_timing_normal);
EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
EXPORT_SYMBOL_GPL(sata_deb_timing_long);
+EXPORT_SYMBOL_GPL(ata_base_port_ops);
+EXPORT_SYMBOL_GPL(sata_port_ops);
+EXPORT_SYMBOL_GPL(sata_pmp_port_ops);
+EXPORT_SYMBOL_GPL(ata_sff_port_ops);
+EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
EXPORT_SYMBOL_GPL(ata_dummy_port_info);
EXPORT_SYMBOL_GPL(ata_std_bios_param);
EXPORT_SYMBOL_GPL(ata_noop_dev_select);
EXPORT_SYMBOL_GPL(ata_std_dev_select);
EXPORT_SYMBOL_GPL(sata_print_link_status);
+EXPORT_SYMBOL_GPL(atapi_cmd_type);
EXPORT_SYMBOL_GPL(ata_tf_to_fis);
EXPORT_SYMBOL_GPL(ata_tf_from_fis);
EXPORT_SYMBOL_GPL(ata_pack_xfermask);
EXPORT_SYMBOL_GPL(ata_bmdma_setup);
EXPORT_SYMBOL_GPL(ata_bmdma_start);
EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
+EXPORT_SYMBOL_GPL(ata_noop_irq_clear);
EXPORT_SYMBOL_GPL(ata_bmdma_status);
EXPORT_SYMBOL_GPL(ata_bmdma_stop);
EXPORT_SYMBOL_GPL(ata_bmdma_freeze);
EXPORT_SYMBOL_GPL(ata_bmdma_thaw);
-EXPORT_SYMBOL_GPL(ata_bmdma_drive_eh);
EXPORT_SYMBOL_GPL(ata_bmdma_error_handler);
EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
EXPORT_SYMBOL_GPL(ata_port_probe);
EXPORT_SYMBOL_GPL(sata_pmp_std_prereset);
EXPORT_SYMBOL_GPL(sata_pmp_std_hardreset);
EXPORT_SYMBOL_GPL(sata_pmp_std_postreset);
-EXPORT_SYMBOL_GPL(sata_pmp_do_eh);
+EXPORT_SYMBOL_GPL(sata_pmp_error_handler);
EXPORT_SYMBOL_GPL(__ata_ehi_push_desc);
EXPORT_SYMBOL_GPL(ata_ehi_push_desc);
EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
EXPORT_SYMBOL_GPL(ata_do_eh);
+EXPORT_SYMBOL_GPL(ata_std_error_handler);
EXPORT_SYMBOL_GPL(ata_irq_on);
EXPORT_SYMBOL_GPL(ata_dev_try_classify);
projects / linux-2.6 / blobdiff