#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
-#include <asm/semaphore.h>
#include <asm/byteorder.h>
#include <linux/cdrom.h>
.qc_defer = ata_std_qc_defer,
.hardreset = sata_std_hardreset,
- .sff_dev_select = ata_noop_dev_select,
-};
-
-const struct ata_port_operations sata_pmp_port_ops = {
- .inherits = &sata_port_ops,
-
- .pmp_prereset = ata_std_prereset,
- .pmp_hardreset = sata_std_hardreset,
- .pmp_postreset = ata_std_postreset,
- .error_handler = sata_pmp_error_handler,
};
static unsigned int ata_dev_init_params(struct ata_device *dev,
return 0;
}
-/**
- * ata_noop_dev_select - Select device 0/1 on ATA bus
- * @ap: ATA channel to manipulate
- * @device: ATA device (numbered from zero) to select
- *
- * This function performs no actual function.
- *
- * May be used as the dev_select() entry in ata_port_operations.
- *
- * LOCKING:
- * caller.
- */
-void ata_noop_dev_select(struct ata_port *ap, unsigned int device)
-{
-}
-
/**
* ata_dump_id - IDENTIFY DEVICE info debugging output
* @id: IDENTIFY DEVICE page to dump
dev->horkage |= ata_dev_blacklisted(dev);
ata_force_horkage(dev);
+ if (dev->horkage & ATA_HORKAGE_DISABLE) {
+ ata_dev_printk(dev, KERN_INFO,
+ "unsupported device, disabling\n");
+ ata_dev_disable(dev);
+ return 0;
+ }
+
/* let ACPI work its magic */
rc = ata_acpi_on_devcfg(dev);
if (rc)
* changed notifications and ATAPI ANs.
*/
if ((ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) &&
- (!ap->nr_pmp_links ||
+ (!sata_pmp_attached(ap) ||
sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) {
unsigned int err_mask;
* LOCKING:
* None.
*/
-void sata_print_link_status(struct ata_link *link)
+static void sata_print_link_status(struct ata_link *link)
{
u32 sstatus, scontrol, tmp;
* RETURNS:
* 1 if SATA spd configuration is needed, 0 otherwise.
*/
-int sata_set_spd_needed(struct ata_link *link)
+static int sata_set_spd_needed(struct ata_link *link)
{
u32 scontrol;
if (rc)
return rc;
- /* Old CFA may refuse this command, which is just fine */
- if (dev->xfer_shift == ATA_SHIFT_PIO && ata_id_is_cfa(dev->id))
- ign_dev_err = 1;
-
- /* Some very old devices and some bad newer ones fail any kind of
- SET_XFERMODE request but support PIO0-2 timings and no IORDY */
- if (dev->xfer_shift == ATA_SHIFT_PIO && !ata_id_has_iordy(dev->id) &&
- dev->pio_mode <= XFER_PIO_2)
- ign_dev_err = 1;
-
+ if (dev->xfer_shift == ATA_SHIFT_PIO) {
+ /* Old CFA may refuse this command, which is just fine */
+ if (ata_id_is_cfa(dev->id))
+ ign_dev_err = 1;
+ /* Catch several broken garbage emulations plus some pre
+ ATA devices */
+ if (ata_id_major_version(dev->id) == 0 &&
+ dev->pio_mode <= XFER_PIO_2)
+ ign_dev_err = 1;
+ /* Some very old devices and some bad newer ones fail
+ any kind of SET_XFERMODE request but support PIO0-2
+ timings and no IORDY */
+ if (!ata_id_has_iordy(dev->id) && dev->pio_mode <= XFER_PIO_2)
+ ign_dev_err = 1;
+ }
/* Early MWDMA devices do DMA but don't allow DMA mode setting.
Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */
if (dev->xfer_shift == ATA_SHIFT_MWDMA &&
* RETURNS:
* 0 if @linke is ready before @deadline; otherwise, -errno.
*/
-extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
+int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
int (*check_ready)(struct ata_link *link))
{
msleep(ATA_WAIT_AFTER_RESET_MSECS);
if ((rc = sata_link_debounce(link, params, deadline)))
return rc;
- /* Clear SError. PMP and some host PHYs require this to
- * operate and clearing should be done before checking PHY
- * online status to avoid race condition (hotplugging between
- * link resume and status check).
- */
+ /* clear SError, some PHYs require this even for SRST to work */
if (!(rc = sata_scr_read(link, SCR_ERROR, &serror)))
rc = sata_scr_write(link, SCR_ERROR, serror);
- if (rc == 0 || rc == -EINVAL) {
- unsigned long flags;
- spin_lock_irqsave(link->ap->lock, flags);
- link->eh_info.serror = 0;
- spin_unlock_irqrestore(link->ap->lock, flags);
- rc = 0;
- }
- return rc;
+ return rc != -EINVAL ? rc : 0;
}
/**
"link for reset (errno=%d)\n", rc);
}
+ /* no point in trying softreset on offline link */
+ if (ata_link_offline(link))
+ ehc->i.action &= ~ATA_EH_SOFTRESET;
+
return 0;
}
if (online)
*online = true;
- if ((link->ap->flags & ATA_FLAG_PMP) && ata_is_host_link(link)) {
+ if (sata_pmp_supported(link->ap) && ata_is_host_link(link)) {
/* If PMP is supported, we have to do follow-up SRST.
* Some PMPs don't send D2H Reg FIS after hardreset if
* the first port is empty. Wait only for
if (check_ready)
rc = ata_wait_ready(link, deadline, check_ready);
out:
- if (rc && rc != -EAGAIN)
+ if (rc && rc != -EAGAIN) {
+ /* online is set iff link is online && reset succeeded */
+ if (online)
+ *online = false;
ata_link_printk(link, KERN_ERR,
"COMRESET failed (errno=%d)\n", rc);
+ }
DPRINTK("EXIT, rc=%d\n", rc);
return rc;
}
*/
void ata_std_postreset(struct ata_link *link, unsigned int *classes)
{
+ u32 serror;
+
DPRINTK("ENTER\n");
+ /* reset complete, clear SError */
+ if (!sata_scr_read(link, SCR_ERROR, &serror))
+ sata_scr_write(link, SCR_ERROR, serror);
+
/* print link status */
sata_print_link_status(link);
{ "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA },
{ "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA },
/* Odd clown on sil3726/4726 PMPs */
- { "Config Disk", NULL, ATA_HORKAGE_NODMA |
- ATA_HORKAGE_SKIP_PM },
+ { "Config Disk", NULL, ATA_HORKAGE_DISABLE },
/* Weird ATAPI devices */
{ "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 },
/* Devices which get the IVB wrong */
{ "QUANTUM FIREBALLlct10 05", "A03.0900", ATA_HORKAGE_IVB, },
+ /* Maybe we should just blacklist TSSTcorp... */
+ { "TSSTcorp CDDVDW SH-S202H", "SB00", ATA_HORKAGE_IVB, },
+ { "TSSTcorp CDDVDW SH-S202H", "SB01", ATA_HORKAGE_IVB, },
{ "TSSTcorp CDDVDW SH-S202J", "SB00", ATA_HORKAGE_IVB, },
{ "TSSTcorp CDDVDW SH-S202J", "SB01", ATA_HORKAGE_IVB, },
{ "TSSTcorp CDDVDW SH-S202N", "SB00", ATA_HORKAGE_IVB, },
/* If the controller thinks we are 80 wire, we are */
if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA)
return 0;
+ /* If the system is known to be 40 wire short cable (eg laptop),
+ then we allow 80 wire modes even if the drive isn't sure */
+ if (ap->cbl == ATA_CBL_PATA40_SHORT)
+ return 0;
/* If the controller doesn't know we scan
- Note: We look for all 40 wire detects at this point.
}
/**
- * ata_check_atapi_dma - Check whether ATAPI DMA can be supported
+ * atapi_check_dma - Check whether ATAPI DMA can be supported
* @qc: Metadata associated with taskfile to check
*
* Allow low-level driver to filter ATA PACKET commands, returning
* RETURNS: 0 when ATAPI DMA can be used
* nonzero otherwise
*/
-int ata_check_atapi_dma(struct ata_queued_cmd *qc)
+int atapi_check_dma(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN;
#endif
+#ifdef CONFIG_ATA_SFF
INIT_DELAYED_WORK(&ap->port_task, ata_pio_task);
+#endif
INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
INIT_LIST_HEAD(&ap->eh_done_q);
*/
static void ata_finalize_port_ops(struct ata_port_operations *ops)
{
- static spinlock_t lock = SPIN_LOCK_UNLOCKED;
+ static DEFINE_SPINLOCK(lock);
const struct ata_port_operations *cur;
void **begin = (void **)ops;
void **end = (void **)&ops->inherits;
spin_lock_irqsave(ap->lock, flags);
ehi->probe_mask |= ATA_ALL_DEVICES;
- ehi->action |= ATA_EH_RESET;
+ ehi->action |= ATA_EH_RESET | ATA_EH_LPM;
ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
ap->pflags &= ~ATA_PFLAG_INITIALIZING;
struct ata_port *ap = host->ports[i];
ata_scsi_scan_host(ap, 1);
- ata_lpm_schedule(ap, ap->pm_policy);
}
return 0;
/*
* Dummy port_ops
*/
-static void ata_dummy_noret(struct ata_port *ap) { }
-static int ata_dummy_ret0(struct ata_port *ap) { return 0; }
-static void ata_dummy_qc_noret(struct ata_queued_cmd *qc) { }
-
-static u8 ata_dummy_check_status(struct ata_port *ap)
+static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc)
{
- return ATA_DRDY;
+ return AC_ERR_SYSTEM;
}
-static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc)
+static void ata_dummy_error_handler(struct ata_port *ap)
{
- return AC_ERR_SYSTEM;
+ /* truly dummy */
}
struct ata_port_operations ata_dummy_port_ops = {
- .sff_check_status = ata_dummy_check_status,
- .sff_check_altstatus = ata_dummy_check_status,
- .sff_dev_select = ata_noop_dev_select,
.qc_prep = ata_noop_qc_prep,
.qc_issue = ata_dummy_qc_issue,
- .freeze = ata_dummy_noret,
- .thaw = ata_dummy_noret,
- .error_handler = ata_dummy_noret,
- .post_internal_cmd = ata_dummy_qc_noret,
- .sff_irq_clear = ata_dummy_noret,
- .port_start = ata_dummy_ret0,
- .port_stop = ata_dummy_noret,
+ .error_handler = ata_dummy_error_handler,
};
const struct ata_port_info ata_dummy_port_info = {
EXPORT_SYMBOL_GPL(sata_deb_timing_long);
EXPORT_SYMBOL_GPL(ata_base_port_ops);
EXPORT_SYMBOL_GPL(sata_port_ops);
-EXPORT_SYMBOL_GPL(sata_pmp_port_ops);
EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
EXPORT_SYMBOL_GPL(ata_dummy_port_info);
EXPORT_SYMBOL_GPL(ata_std_bios_param);
EXPORT_SYMBOL_GPL(ata_sg_init);
EXPORT_SYMBOL_GPL(ata_qc_complete);
EXPORT_SYMBOL_GPL(ata_qc_complete_multiple);
-EXPORT_SYMBOL_GPL(ata_noop_dev_select);
-EXPORT_SYMBOL_GPL(sata_print_link_status);
EXPORT_SYMBOL_GPL(atapi_cmd_type);
EXPORT_SYMBOL_GPL(ata_tf_to_fis);
EXPORT_SYMBOL_GPL(ata_tf_from_fis);
#endif /* CONFIG_PM */
#endif /* CONFIG_PCI */
-EXPORT_SYMBOL_GPL(sata_pmp_qc_defer_cmd_switch);
-EXPORT_SYMBOL_GPL(sata_pmp_error_handler);
-
EXPORT_SYMBOL_GPL(__ata_ehi_push_desc);
EXPORT_SYMBOL_GPL(ata_ehi_push_desc);
EXPORT_SYMBOL_GPL(ata_ehi_clear_desc);
EXPORT_SYMBOL_GPL(ata_eh_thaw_port);
EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
+EXPORT_SYMBOL_GPL(ata_eh_analyze_ncq_error);
EXPORT_SYMBOL_GPL(ata_do_eh);
EXPORT_SYMBOL_GPL(ata_std_error_handler);