config ATA
tristate "ATA device support"
+ depends on BLOCK
+ depends on !(M32R || M68K) || BROKEN
+ depends on !SUN4 || BROKEN
select SCSI
---help---
If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX)
default y
+config PATA_ALI
+ tristate "ALi PATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the ALi ATA interfaces
+ found on the many ALi chipsets.
+
+ If unsure, say N.
+
+config PATA_AMD
+ tristate "AMD/NVidia PATA support (Experimental)"
+ depends on PCI
+ help
+ This option enables support for the AMD and NVidia PATA
+ interfaces found on the chipsets for Athlon/Athlon64.
+
+ If unsure, say N.
+
+config PATA_ARTOP
+ tristate "ARTOP 6210/6260 PATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for ARTOP PATA controllers.
+
+ If unsure, say N.
+
+config PATA_ATIIXP
+ tristate "ATI PATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the ATI ATA interfaces
+ found on the many ATI chipsets.
+
+ If unsure, say N.
+
+config PATA_CMD64X
+ tristate "CMD64x PATA support (Very Experimental)"
+ depends on PCI&& EXPERIMENTAL
+ help
+ This option enables support for the CMD64x series chips
+ except for the CMD640.
+
+ If unsure, say N.
+
+config PATA_CS5520
+ tristate "CS5510/5520 PATA support"
+ depends on PCI
+ help
+ This option enables support for the Cyrix 5510/5520
+ companion chip used with the MediaGX/Geode processor family.
+
+ If unsure, say N.
+
+config PATA_CS5530
+ tristate "CS5530 PATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the Cyrix/NatSemi/AMD CS5530
+ companion chip used with the MediaGX/Geode processor family.
+
+ If unsure, say N.
+
+config PATA_CS5535
+ tristate "CS5535 PATA support (Experimental)"
+ depends on PCI && X86 && !X86_64 && EXPERIMENTAL
+ help
+ This option enables support for the NatSemi/AMD CS5535
+ companion chip used with the Geode processor family.
+
+ If unsure, say N.
+
+config PATA_CYPRESS
+ tristate "Cypress CY82C693 PATA support (Very Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the Cypress/Contaq CY82C693
+ chipset found in some Alpha systems
+
+ If unsure, say N.
+
+config PATA_EFAR
+ tristate "EFAR SLC90E66 support"
+ depends on PCI
+ help
+ This option enables support for the EFAR SLC90E66
+ IDE controller found on some older machines.
+
+ If unsure, say N.
+
+config ATA_GENERIC
+ tristate "Generic ATA support"
+ depends on PCI
+ help
+ This option enables support for generic BIOS configured
+ ATA controllers via the new ATA layer
+
+ If unsure, say N.
+
+config PATA_HPT366
+ tristate "HPT 366/368 PATA support (Very Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the HPT 366 and 368
+ PATA controllers via the new ATA layer.
+
+ If unsure, say N.
+
+config PATA_HPT37X
+ tristate "HPT 370/370A/371/372/374/302 PATA support (Very Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the majority of the later HPT
+ PATA controllers via the new ATA layer.
+
+ If unsure, say N.
+
+config PATA_HPT3X2N
+ tristate "HPT 372N/302N PATA support (Very Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the N variant HPT PATA
+ controllers via the new ATA layer
+
+ If unsure, say N.
+
+config PATA_HPT3X3
+ tristate "HPT 343/363 PATA support (Experimental)"
+ depends on PCI
+ help
+ This option enables support for the HPT 343/363
+ PATA controllers via the new ATA layer
+
+ If unsure, say N.
+
+config PATA_ISAPNP
+ tristate "ISA Plug and Play PATA support (Very Experimental)"
+ depends on EXPERIMENTAL && ISAPNP
+ help
+ This option enables support for ISA plug & play ATA
+ controllers such as those found on old soundcards.
+
+ If unsure, say N.
+
+config PATA_IT821X
+ tristate "IT821x PATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the ITE 8211 and 8212
+ PATA controllers via the new ATA layer, including RAID
+ mode.
+
+ If unsure, say N.
+
+config PATA_JMICRON
+ tristate "JMicron PATA support"
+ depends on PCI
+ help
+ Enable support for the JMicron IDE controller, via the new
+ ATA layer.
+
+ If unsure, say N.
+
+config PATA_LEGACY
+ tristate "Legacy ISA PATA support (Experimental)"
+ depends on ISA && EXPERIMENTAL
+ help
+ This option enables support for ISA/VLB bus legacy PATA
+ ports and allows them to be accessed via the new ATA layer.
+
+ If unsure, say N.
+
+config PATA_TRIFLEX
+ tristate "Compaq Triflex PATA support"
+ depends on PCI
+ help
+ Enable support for the Compaq 'Triflex' IDE controller as found
+ on many Compaq Pentium-Pro systems, via the new ATA layer.
+
+ If unsure, say N.
+
+config PATA_MARVELL
+ tristate "Marvell PATA support via legacy mode"
+ depends on PCI
+ help
+ This option enables limited support for the Marvell 88SE6145 ATA
+ controller.
+
+ If unsure, say N.
+
+config PATA_MPIIX
+ tristate "Intel PATA MPIIX support"
+ depends on PCI
+ help
+ This option enables support for MPIIX PATA support.
+
+ If unsure, say N.
+
+config PATA_OLDPIIX
+ tristate "Intel PATA old PIIX support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for old(?) PIIX PATA support.
+
+ If unsure, say N.
+
+config PATA_NETCELL
+ tristate "NETCELL Revolution RAID support"
+ depends on PCI
+ help
+ This option enables support for the Netcell Revolution RAID
+ PATA controller.
+
+ If unsure, say N.
+
+config PATA_NS87410
+ tristate "Nat Semi NS87410 PATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the National Semiconductor
+ NS87410 PCI-IDE controller.
+
+ If unsure, say N.
+
+config PATA_OPTI
+ tristate "OPTI621/6215 PATA support (Very Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables full PIO support for the early Opti ATA
+ controllers found on some old motherboards.
+
+ If unsure, say N.
+
+config PATA_OPTIDMA
+ tristate "OPTI FireStar PATA support (Veyr Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables DMA/PIO support for the later OPTi
+ controllers found on some old motherboards and in some
+ latops
+
+ If unsure, say N.
+
+config PATA_PCMCIA
+ tristate "PCMCIA PATA support"
+ depends on PCMCIA
+ help
+ This option enables support for PCMCIA ATA interfaces, including
+ compact flash card adapters via the new ATA layer.
+
+ If unsure, say N.
+
+config PATA_PDC_OLD
+ tristate "Older Promise PATA controller support (Very Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the Promise 20246, 20262, 20263,
+ 20265 and 20267 adapters.
+
+ If unsure, say N.
+
+config PATA_QDI
+ tristate "QDI VLB PATA support"
+ depends on ISA
+ help
+ Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
+
+config PATA_RADISYS
+ tristate "RADISYS 82600 PATA support (Very experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the RADISYS 82600
+ PATA controllers via the new ATA layer
+
+ If unsure, say N.
+
+config PATA_RZ1000
+ tristate "PC Tech RZ1000 PATA support"
+ depends on PCI
+ help
+ This option enables basic support for the PC Tech RZ1000/1
+ PATA controllers via the new ATA layer
+
+ If unsure, say N.
+
+config PATA_SC1200
+ tristate "SC1200 PATA support (Raving Lunatic)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the NatSemi/AMD SC1200 SoC
+ companion chip used with the Geode processor family.
+
+ If unsure, say N.
+
+config PATA_SERVERWORKS
+ tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the Serverworks OSB4/CSB5/CSB6 and
+ HT1000 PATA controllers, via the new ATA layer.
+
+ If unsure, say N.
+
+config PATA_PDC2027X
+ tristate "Promise PATA 2027x support"
+ depends on PCI
+ help
+ This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
+
+ If unsure, say N.
+
+config PATA_SIL680
+ tristate "CMD / Silicon Image 680 PATA support"
+ depends on PCI
+ help
+ This option enables support for CMD / Silicon Image 680 PATA.
+
+ If unsure, say N.
+
+config PATA_SIS
+ tristate "SiS PATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for SiS PATA controllers
+
+ If unsure, say N.
+
+config PATA_VIA
+ tristate "VIA PATA support"
+ depends on PCI
+ help
+ This option enables support for the VIA PATA interfaces
+ found on the many VIA chipsets.
+
+ If unsure, say N.
+
+config PATA_WINBOND
+ tristate "Winbond SL82C105 PATA support"
+ depends on PCI
+ help
+ This option enables support for SL82C105 PATA devices found in the
+ Netwinder and some other systems
+
+ If unsure, say N.
+
+config PATA_WINBOND_VLB
+ tristate "Winbond W83759A VLB PATA support (Experimental)"
+ depends on ISA && EXPERIMENTAL
+ help
+ Support for the Winbond W83759A controller on Vesa Local Bus
+ systems.
+
+config PATA_PLATFORM
+ tristate "Generic platform device PATA support"
+ depends on EMBEDDED
+ help
+ This option enables support for generic directly connected ATA
+ devices commonly found on embedded systems.
+
+ If unsure, say N.
+
+config PATA_IXP4XX_CF
+ tristate "IXP4XX Compact Flash support"
+ depends on ARCH_IXP4XX
+ help
+ This option enables support for a Compact Flash connected on
+ the ixp4xx expansion bus. This driver had been written for
+ Loft/Avila boards in mind but can work with others.
+
+ If unsure, say N.
+
endif
endmenu
projects / linux-2.6 / blobdiff