#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/backlight.h>
#include <asm/uaccess.h>
#include <acpi/acpi_bus.h>
#define ACPI_VIDEO_COMPONENT 0x08000000
#define ACPI_VIDEO_CLASS "video"
-#define ACPI_VIDEO_DRIVER_NAME "ACPI Video Driver"
#define ACPI_VIDEO_BUS_NAME "Video Bus"
#define ACPI_VIDEO_DEVICE_NAME "Video Device"
#define ACPI_VIDEO_NOTIFY_SWITCH 0x80
#define ACPI_VIDEO_HEAD_INVALID (~0u - 1)
#define ACPI_VIDEO_HEAD_END (~0u)
+#define MAX_NAME_LEN 20
+
+#define ACPI_VIDEO_DISPLAY_CRT 1
+#define ACPI_VIDEO_DISPLAY_TV 2
+#define ACPI_VIDEO_DISPLAY_DVI 3
+#define ACPI_VIDEO_DISPLAY_LCD 4
#define _COMPONENT ACPI_VIDEO_COMPONENT
-ACPI_MODULE_NAME("acpi_video")
+ACPI_MODULE_NAME("video");
- MODULE_AUTHOR("Bruno Ducrot");
-MODULE_DESCRIPTION(ACPI_VIDEO_DRIVER_NAME);
+MODULE_AUTHOR("Bruno Ducrot");
+MODULE_DESCRIPTION("ACPI Video Driver");
MODULE_LICENSE("GPL");
static int acpi_video_bus_add(struct acpi_device *device);
static int acpi_video_bus_remove(struct acpi_device *device, int type);
-static int acpi_video_bus_match(struct acpi_device *device,
- struct acpi_driver *driver);
static struct acpi_driver acpi_video_bus = {
- .name = ACPI_VIDEO_DRIVER_NAME,
+ .name = "video",
.class = ACPI_VIDEO_CLASS,
+ .ids = ACPI_VIDEO_HID,
.ops = {
.add = acpi_video_bus_add,
.remove = acpi_video_bus_remove,
- .match = acpi_video_bus_match,
},
};
struct acpi_video_device_attrib {
u32 display_index:4; /* A zero-based instance of the Display */
- u32 display_port_attachment:4; /*This field differenates displays type */
+ u32 display_port_attachment:4; /*This field differentiates the display type */
u32 display_type:4; /*Describe the specific type in use */
- u32 vendor_specific:4; /*Chipset Vendor Specifi */
+ u32 vendor_specific:4; /*Chipset Vendor Specific */
u32 bios_can_detect:1; /*BIOS can detect the device */
u32 depend_on_vga:1; /*Non-VGA output device whose power is related to
the VGA device. */
u8 crt:1;
u8 lcd:1;
u8 tvout:1;
+ u8 dvi:1;
u8 bios:1;
u8 unknown:1;
- u8 reserved:3;
+ u8 reserved:2;
};
struct acpi_video_device_cap {
u8 _ADR:1; /*Return the unique ID */
u8 _BCL:1; /*Query list of brightness control levels supported */
u8 _BCM:1; /*Set the brightness level */
+ u8 _BQC:1; /* Get current brightness level */
u8 _DDC:1; /*Return the EDID for this device */
u8 _DCS:1; /*Return status of output device */
u8 _DGS:1; /*Query graphics state */
u8 _DSS:1; /*Device state set */
- u8 _reserved:1;
};
struct acpi_video_device_brightness {
struct acpi_video_bus *video;
struct acpi_device *dev;
struct acpi_video_device_brightness *brightness;
+ struct backlight_device *backlight;
};
/* bus */
struct acpi_video_device *device);
static int acpi_video_device_enumerate(struct acpi_video_bus *video);
static int acpi_video_switch_output(struct acpi_video_bus *video, int event);
+static int acpi_video_device_lcd_set_level(struct acpi_video_device *device,
+ int level);
+static int acpi_video_device_lcd_get_level_current(
+ struct acpi_video_device *device,
+ unsigned long *level);
static int acpi_video_get_next_level(struct acpi_video_device *device,
u32 level_current, u32 event);
static void acpi_video_switch_brightness(struct acpi_video_device *device,
int event);
+/*backlight device sysfs support*/
+static int acpi_video_get_brightness(struct backlight_device *bd)
+{
+ unsigned long cur_level;
+ struct acpi_video_device *vd =
+ (struct acpi_video_device *)class_get_devdata(&bd->class_dev);
+ acpi_video_device_lcd_get_level_current(vd, &cur_level);
+ return (int) cur_level;
+}
+
+static int acpi_video_set_brightness(struct backlight_device *bd)
+{
+ int request_level = bd->props.brightness;
+ struct acpi_video_device *vd =
+ (struct acpi_video_device *)class_get_devdata(&bd->class_dev);
+ acpi_video_device_lcd_set_level(vd, request_level);
+ return 0;
+}
+
+static struct backlight_ops acpi_backlight_ops = {
+ .get_brightness = acpi_video_get_brightness,
+ .update_status = acpi_video_set_brightness,
+};
+
/* --------------------------------------------------------------------------
Video Management
-------------------------------------------------------------------------- */
* 0. The system BIOS should NOT automatically switch(toggle)
* the active display output.
* 1. The system BIOS should automatically switch (toggle) the
- * active display output. No swich event.
+ * active display output. No switch event.
* 2. The _DGS value should be locked.
* 3. The system BIOS should not automatically switch (toggle) the
* active display output, but instead generate the display switch
* event notify code.
* lcd_flag :
* 0. The system BIOS should automatically control the brightness level
- * of the LCD, when the power changes from AC to DC
+ * of the LCD when the power changes from AC to DC
* 1. The system BIOS should NOT automatically control the brightness
- * level of the LCD, when the power changes from AC to DC.
+ * level of the LCD when the power changes from AC to DC.
* Return Value:
* -1 wrong arg.
*/
* Return Value:
* None
*
- * Find out all required AML method defined under the output
+ * Find out all required AML methods defined under the output
* device.
*/
acpi_integer status;
acpi_handle h_dummy1;
int i;
+ u32 max_level = 0;
union acpi_object *obj = NULL;
struct acpi_video_device_brightness *br = NULL;
if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_BCM", &h_dummy1))) {
device->cap._BCM = 1;
}
+ if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle,"_BQC",&h_dummy1)))
+ device->cap._BQC = 1;
if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DDC", &h_dummy1))) {
device->cap._DDC = 1;
}
continue;
}
br->levels[count] = (u32) o->integer.value;
+ if (br->levels[count] > max_level)
+ max_level = br->levels[count];
count++;
}
out:
kfree(obj);
+ if (device->cap._BCL && device->cap._BCM && device->cap._BQC){
+ unsigned long tmp;
+ static int count = 0;
+ char *name;
+ name = kzalloc(MAX_NAME_LEN, GFP_KERNEL);
+ if (!name)
+ return;
+
+ sprintf(name, "acpi_video%d", count++);
+ acpi_video_device_lcd_get_level_current(device, &tmp);
+ device->backlight = backlight_device_register(name,
+ NULL, device, &acpi_backlight_ops);
+ device->backlight->props.max_brightness = max_level;
+ device->backlight->props.brightness = (int)tmp;
+ backlight_update_status(device->backlight);
+
+ kfree(name);
+ }
return;
}
* Return Value:
* None
*
- * Find out all required AML method defined under the video bus device.
+ * Find out all required AML methods defined under the video bus device.
*/
static void acpi_video_bus_find_cap(struct acpi_video_bus *video)
* to check well known required nodes.
*/
- /* Does this device able to support video switching ? */
+ /* Does this device support video switching? */
if (video->cap._DOS) {
video->flags.multihead = 1;
status = 0;
}
- /* Does this device able to retrieve a retrieve a video ROM ? */
+ /* Does this device support retrieving a video ROM? */
if (video->cap._ROM) {
video->flags.rom = 1;
status = 0;
}
- /* Does this device able to configure which video device to POST ? */
+ /* Does this device support configuring which video device to POST? */
if (video->cap._GPD && video->cap._SPD && video->cap._VPO) {
video->flags.post = 1;
status = 0;
seq_printf(seq, "LCD\n");
else if (dev->flags.tvout)
seq_printf(seq, "TVOUT\n");
+ else if (dev->flags.dvi)
+ seq_printf(seq, "DVI\n");
else
seq_printf(seq, "UNKNOWN\n");
if (level > 100)
return -EFAULT;
- /* validate though the list of available levels */
+ /* validate through the list of available levels */
for (i = 0; i < dev->brightness->count; i++)
if (level == dev->brightness->levels[i]) {
if (ACPI_SUCCESS
printk(KERN_WARNING PREFIX
"The motherboard VGA device is not listed as a possible POST device.\n");
printk(KERN_WARNING PREFIX
- "This indicate a BIOS bug. Please contact the manufacturer.\n");
+ "This indicates a BIOS bug. Please contact the manufacturer.\n");
}
printk("%lx\n", options);
- seq_printf(seq, "can POST: <intgrated video>");
+ seq_printf(seq, "can POST: <integrated video>");
if (options & 2)
seq_printf(seq, " <PCI video>");
if (options & 4)
seq_printf(seq, "<not supported>\n");
goto end;
}
- seq_printf(seq, "device posted is <%s>\n", device_decode[id & 3]);
+ seq_printf(seq, "device POSTed is <%s>\n", device_decode[id & 3]);
end:
return 0;
if (opt > 3)
return -EFAULT;
- /* just in case an OEM 'forget' the motherboard... */
+ /* just in case an OEM 'forgot' the motherboard... */
options |= 1;
if (options & (1ul << opt)) {
-------------------------------------------------------------------------- */
/* device interface */
+static struct acpi_video_device_attrib*
+acpi_video_get_device_attr(struct acpi_video_bus *video, unsigned long device_id)
+{
+ int count;
+
+ for(count = 0; count < video->attached_count; count++)
+ if((video->attached_array[count].value.int_val & 0xffff) == device_id)
+ return &(video->attached_array[count].value.attrib);
+ return NULL;
+}
static int
acpi_video_bus_get_one_device(struct acpi_device *device,
unsigned long device_id;
int status;
struct acpi_video_device *data;
-
+ struct acpi_video_device_attrib* attribute;
if (!device || !video)
return -EINVAL;
data->video = video;
data->dev = device;
- switch (device_id & 0xffff) {
- case 0x0100:
- data->flags.crt = 1;
- break;
- case 0x0400:
- data->flags.lcd = 1;
- break;
- case 0x0200:
- data->flags.tvout = 1;
- break;
- default:
+ attribute = acpi_video_get_device_attr(video, device_id);
+
+ if((attribute != NULL) && attribute->device_id_scheme) {
+ switch (attribute->display_type) {
+ case ACPI_VIDEO_DISPLAY_CRT:
+ data->flags.crt = 1;
+ break;
+ case ACPI_VIDEO_DISPLAY_TV:
+ data->flags.tvout = 1;
+ break;
+ case ACPI_VIDEO_DISPLAY_DVI:
+ data->flags.dvi = 1;
+ break;
+ case ACPI_VIDEO_DISPLAY_LCD:
+ data->flags.lcd = 1;
+ break;
+ default:
+ data->flags.unknown = 1;
+ break;
+ }
+ if(attribute->bios_can_detect)
+ data->flags.bios = 1;
+ } else
data->flags.unknown = 1;
- break;
- }
acpi_video_device_bind(video, data);
acpi_video_device_find_cap(data);
/*
* Arg:
* video : video bus device
- * event : Nontify Event
+ * event : notify event
*
* Return:
* < 0 : error
*
* 1. Find out the current active output device.
- * 2. Identify the next output device to switch
+ * 2. Identify the next output device to switch to.
* 3. call _DSS to do actual switch.
*/
status = acpi_remove_notify_handler(device->dev->handle,
ACPI_DEVICE_NOTIFY,
acpi_video_device_notify);
-
+ backlight_device_unregister(device->backlight);
return 0;
}
device = video->device;
switch (event) {
- case ACPI_VIDEO_NOTIFY_SWITCH: /* User request that a switch occur,
+ case ACPI_VIDEO_NOTIFY_SWITCH: /* User requested a switch,
* most likely via hotkey. */
acpi_bus_generate_event(device, event, 0);
break;
- case ACPI_VIDEO_NOTIFY_PROBE: /* User plug or remove a video
+ case ACPI_VIDEO_NOTIFY_PROBE: /* User plugged in or removed a video
* connector. */
acpi_video_device_enumerate(video);
acpi_video_device_rebind(video);
return 0;
}
-static int
-acpi_video_bus_match(struct acpi_device *device, struct acpi_driver *driver)
-{
- acpi_handle h_dummy1;
- acpi_handle h_dummy2;
- acpi_handle h_dummy3;
-
-
- if (!device || !driver)
- return -EINVAL;
-
- /* Since there is no HID, CID for ACPI Video drivers, we have
- * to check well known required nodes for each feature we support.
- */
-
- /* Does this device able to support video switching ? */
- if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy1)) &&
- ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy2)))
- return 0;
-
- /* Does this device able to retrieve a video ROM ? */
- if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy1)))
- return 0;
-
- /* Does this device able to configure which video head to be POSTed ? */
- if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy1)) &&
- ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy2)) &&
- ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy3)))
- return 0;
-
- return -ENODEV;
-}
-
static int __init acpi_video_init(void)
{
int result = 0;