*/
+#include <linux/dmi.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
return NULL;
}
+/* http://bugzilla.kernel.org/show_bug.cgi?id=4773 */
+static struct dmi_system_id medion_md9580[] = {
+ {
+ .ident = "Medion MD9580-F laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MEDIONNB"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "A555"),
+ },
+ },
+ { }
+};
+
+/* http://bugzilla.kernel.org/show_bug.cgi?id=5044 */
+static struct dmi_system_id dell_optiplex[] = {
+ {
+ .ident = "Dell Optiplex GX1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX1 600S+"),
+ },
+ },
+ { }
+};
+
+/* http://bugzilla.kernel.org/show_bug.cgi?id=10138 */
+static struct dmi_system_id hp_t5710[] = {
+ {
+ .ident = "HP t5710",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "hp t5000 series"),
+ DMI_MATCH(DMI_BOARD_NAME, "098Ch"),
+ },
+ },
+ { }
+};
+
+struct prt_quirk {
+ struct dmi_system_id *system;
+ unsigned int segment;
+ unsigned int bus;
+ unsigned int device;
+ unsigned char pin;
+ char *source; /* according to BIOS */
+ char *actual_source;
+};
+
+/*
+ * These systems have incorrect _PRT entries. The BIOS claims the PCI
+ * interrupt at the listed segment/bus/device/pin is connected to the first
+ * link device, but it is actually connected to the second.
+ */
+static struct prt_quirk prt_quirks[] = {
+ { medion_md9580, 0, 0, 9, 'A',
+ "\\_SB_.PCI0.ISA_.LNKA",
+ "\\_SB_.PCI0.ISA_.LNKB"},
+ { dell_optiplex, 0, 0, 0xd, 'A',
+ "\\_SB_.LNKB",
+ "\\_SB_.LNKA"},
+ { hp_t5710, 0, 0, 1, 'A',
+ "\\_SB_.PCI0.LNK1",
+ "\\_SB_.PCI0.LNK3"},
+};
+
+static void
+do_prt_fixups(struct acpi_prt_entry *entry, struct acpi_pci_routing_table *prt)
+{
+ int i;
+ struct prt_quirk *quirk;
+
+ for (i = 0; i < ARRAY_SIZE(prt_quirks); i++) {
+ quirk = &prt_quirks[i];
+
+ /* All current quirks involve link devices, not GSIs */
+ if (!prt->source)
+ continue;
+
+ if (dmi_check_system(quirk->system) &&
+ entry->id.segment == quirk->segment &&
+ entry->id.bus == quirk->bus &&
+ entry->id.device == quirk->device &&
+ entry->pin + 'A' == quirk->pin &&
+ !strcmp(prt->source, quirk->source) &&
+ strlen(prt->source) >= strlen(quirk->actual_source)) {
+ printk(KERN_WARNING PREFIX "firmware reports "
+ "%04x:%02x:%02x PCI INT %c connected to %s; "
+ "changing to %s\n",
+ entry->id.segment, entry->id.bus,
+ entry->id.device, 'A' + entry->pin,
+ prt->source, quirk->actual_source);
+ strcpy(prt->source, quirk->actual_source);
+ }
+ }
+}
+
static int
acpi_pci_irq_add_entry(acpi_handle handle,
int segment, int bus, struct acpi_pci_routing_table *prt)
entry->id.function = prt->address & 0xFFFF;
entry->pin = prt->pin;
+ do_prt_fixups(entry, prt);
+
/*
* Type 1: Dynamic
* ---------------
{
struct pci_dev *bridge = dev;
int irq = -1;
- u8 bridge_pin = 0;
+ u8 bridge_pin = 0, orig_pin = pin;
if (!dev)
}
if (irq < 0) {
- printk(KERN_WARNING PREFIX "Unable to derive IRQ for device %s\n",
- pci_name(dev));
+ dev_warn(&dev->dev, "can't derive routing for PCI INT %c\n",
+ 'A' + orig_pin);
return -1;
}
int triggering = ACPI_LEVEL_SENSITIVE;
int polarity = ACPI_ACTIVE_LOW;
char *link = NULL;
+ char link_desc[16];
int rc;
pin--;
if (!dev->bus) {
- printk(KERN_ERR PREFIX "Invalid (NULL) 'bus' field\n");
+ dev_err(&dev->dev, "invalid (NULL) 'bus' field\n");
return -ENODEV;
}
* driver reported one, then use it. Exit in any case.
*/
if (irq < 0) {
- printk(KERN_WARNING PREFIX "PCI Interrupt %s[%c]: no GSI",
- pci_name(dev), ('A' + pin));
+ dev_warn(&dev->dev, "PCI INT %c: no GSI", 'A' + pin);
/* Interrupt Line values above 0xF are forbidden */
if (dev->irq > 0 && (dev->irq <= 0xF)) {
printk(" - using IRQ %d\n", dev->irq);
rc = acpi_register_gsi(irq, triggering, polarity);
if (rc < 0) {
- printk(KERN_WARNING PREFIX "PCI Interrupt %s[%c]: failed "
- "to register GSI\n", pci_name(dev), ('A' + pin));
+ dev_warn(&dev->dev, "PCI INT %c: failed to register GSI\n",
+ 'A' + pin);
return rc;
}
dev->irq = rc;
- printk(KERN_INFO PREFIX "PCI Interrupt %s[%c] -> ",
- pci_name(dev), 'A' + pin);
-
if (link)
- printk("Link [%s] -> ", link);
+ snprintf(link_desc, sizeof(link_desc), " -> Link[%s]", link);
+ else
+ link_desc[0] = '\0';
- printk("GSI %u (%s, %s) -> IRQ %d\n", irq,
- (triggering == ACPI_LEVEL_SENSITIVE) ? "level" : "edge",
- (polarity == ACPI_ACTIVE_LOW) ? "low" : "high", dev->irq);
+ dev_info(&dev->dev, "PCI INT %c%s -> GSI %u (%s, %s) -> IRQ %d\n",
+ 'A' + pin, link_desc, irq,
+ (triggering == ACPI_LEVEL_SENSITIVE) ? "level" : "edge",
+ (polarity == ACPI_ACTIVE_LOW) ? "low" : "high", dev->irq);
return 0;
}
* (e.g. PCI_UNDEFINED_IRQ).
*/
- printk(KERN_INFO PREFIX "PCI interrupt for device %s disabled\n",
- pci_name(dev));
-
+ dev_info(&dev->dev, "PCI INT %c disabled\n", 'A' + pin);
acpi_unregister_gsi(gsi);
-
- return;
}