x86: remove unneeded check in mmconf reject

[linux-2.6] / arch / x86 / pci / mmconfig-shared.c

diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 36a4a7514b05b5b0a0ab717c9d23f1e40e961dde..6f68658b519dbaabf786046e20152138b90bd913 100644 (file)
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -100,33 +100,96 @@ static const char __init *pci_mmcfg_intel_945(void)
        return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub";
 }
 
+static const char __init *pci_mmcfg_amd_fam10h(void)
+{
+       u32 low, high, address;
+       u64 base, msr;
+       int i;
+       unsigned segnbits = 0, busnbits;
+
+       address = MSR_FAM10H_MMIO_CONF_BASE;
+       if (rdmsr_safe(address, &low, &high))
+               return NULL;
+
+       msr = high;
+       msr <<= 32;
+       msr |= low;
+
+       /* mmconfig is not enable */
+       if (!(msr & FAM10H_MMIO_CONF_ENABLE))
+               return NULL;
+
+       base = msr & (FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT);
+
+       busnbits = (msr >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) &
+                        FAM10H_MMIO_CONF_BUSRANGE_MASK;
+
+       /*
+        * only handle bus 0 ?
+        * need to skip it
+        */
+       if (!busnbits)
+               return NULL;
+
+       if (busnbits > 8) {
+               segnbits = busnbits - 8;
+               busnbits = 8;
+       }
+
+       pci_mmcfg_config_num = (1 << segnbits);
+       pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]) *
+                                  pci_mmcfg_config_num, GFP_KERNEL);
+       if (!pci_mmcfg_config)
+               return NULL;
+
+       for (i = 0; i < (1 << segnbits); i++) {
+               pci_mmcfg_config[i].address = base + (1<<28) * i;
+               pci_mmcfg_config[i].pci_segment = i;
+               pci_mmcfg_config[i].start_bus_number = 0;
+               pci_mmcfg_config[i].end_bus_number = (1 << busnbits) - 1;
+       }
+
+       return "AMD Family 10h NB";
+}
+
 struct pci_mmcfg_hostbridge_probe {
+       u32 bus;
+       u32 devfn;
        u32 vendor;
        u32 device;
        const char *(*probe)(void);
 };
 
 static struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] __initdata = {
-       { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 },
-       { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 },
+       { 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_INTEL,
+         PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 },
+       { 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_INTEL,
+         PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 },
+       { 0, PCI_DEVFN(0x18, 0), PCI_VENDOR_ID_AMD,
+         0x1200, pci_mmcfg_amd_fam10h },
+       { 0xff, PCI_DEVFN(0, 0), PCI_VENDOR_ID_AMD,
+         0x1200, pci_mmcfg_amd_fam10h },
 };
 
 static int __init pci_mmcfg_check_hostbridge(void)
 {
        u32 l;
+       u32 bus, devfn;
        u16 vendor, device;
        int i;
        const char *name;
 
-       pci_direct_conf1.read(0, 0, PCI_DEVFN(0,0), 0, 4, &l);
-       vendor = l & 0xffff;
-       device = (l >> 16) & 0xffff;
-
        pci_mmcfg_config_num = 0;
        pci_mmcfg_config = NULL;
        name = NULL;
 
        for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) {
+               bus =  pci_mmcfg_probes[i].bus;
+               devfn = pci_mmcfg_probes[i].devfn;
+               pci_direct_conf1.read(0, bus, devfn, 0, 4, &l);
+               vendor = l & 0xffff;
+               device = (l >> 16) & 0xffff;
+
                if (pci_mmcfg_probes[i].vendor == vendor &&
                    pci_mmcfg_probes[i].device == device)
                        name = pci_mmcfg_probes[i].probe();
@@ -253,18 +316,6 @@ static void __init pci_mmcfg_reject_broken(int type, int early)
 
        cfg = &pci_mmcfg_config[0];
 
-       /*
-        * Handle more broken MCFG tables on Asus etc.
-        * They only contain a single entry for bus 0-0.
-        */
-       if (pci_mmcfg_config_num == 1 &&
-           cfg->pci_segment == 0 &&
-           (cfg->start_bus_number | cfg->end_bus_number) == 0) {
-               printk(KERN_ERR "PCI: start and end of bus number is 0. "
-                      "Rejected as broken MCFG.\n");
-               goto reject;
-       }
-
        for (i = 0; i < pci_mmcfg_config_num; i++) {
                int valid = 0;
                u32 size = (cfg->end_bus_number + 1) << 20;