#include <asm/head.h>
#include <asm/ttable.h>
#include <asm/mmu.h>
+#include <asm/cpudata.h>
/* This section from from _start to sparc64_boot_end should fit into
- * 0x0000.0000.0040.4000 to 0x0000.0000.0040.8000 and will be sharing space
- * with bootup_user_stack, which is from 0x0000.0000.0040.4000 to
- * 0x0000.0000.0040.6000 and empty_bad_page, which is from
- * 0x0000.0000.0040.6000 to 0x0000.0000.0040.8000.
+ * 0x0000000000404000 to 0x0000000000408000.
*/
-
.text
.globl start, _start, stext, _stext
_start:
start:
_stext:
stext:
-bootup_user_stack:
! 0x0000000000404000
b sparc64_boot
flushw /* Flush register file. */
stx %l3, [%sp + 2047 + 128 + 0x10] ! num_rets, 5
stx %l2, [%sp + 2047 + 128 + 0x18] ! arg1: "translate"
stx %l5, [%sp + 2047 + 128 + 0x20] ! arg2: prom_mmu_ihandle_cache
- srlx %l0, 22, %l3
- sllx %l3, 22, %l3
+ /* PAGE align */
+ srlx %l0, 13, %l3
+ sllx %l3, 13, %l3
stx %l3, [%sp + 2047 + 128 + 0x28] ! arg3: vaddr, our PC
stx %g0, [%sp + 2047 + 128 + 0x30] ! res1
stx %g0, [%sp + 2047 + 128 + 0x38] ! res2
ldx [%sp + 2047 + 128 + 0x48], %l2 ! physaddr high
stx %l2, [%l4 + 0x0]
ldx [%sp + 2047 + 128 + 0x50], %l3 ! physaddr low
+ /* 4MB align */
+ srlx %l3, 22, %l3
+ sllx %l3, 22, %l3
stx %l3, [%l4 + 0x8]
/* Leave service as-is, "call-method" */
1: sethi %hi(tlb_type), %g1
stw %g2, [%g1 + %lo(tlb_type)]
- BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,1f)
- ba,pt %xcc, 2f
- nop
-
-1: /* Patch context register writes to support nucleus page
- * size correctly.
- */
- call cheetah_plus_patch_etrap
- nop
- call cheetah_plus_patch_rtrap
- nop
- call cheetah_plus_patch_fpdis
- nop
- call cheetah_plus_patch_winfixup
- nop
-
-2: /* Patch copy/page operations to cheetah optimized versions. */
+ /* Patch copy/page operations to cheetah optimized versions. */
call cheetah_patch_copyops
nop
call cheetah_patch_copy_page
nop
/* Not reached... */
-/* IMPORTANT NOTE: Whenever making changes here, check
- * trampoline.S as well. -jj */
- .globl setup_tba
-setup_tba: /* i0 = is_starfire */
- save %sp, -160, %sp
-
- rdpr %tba, %g7
- sethi %hi(prom_tba), %o1
- or %o1, %lo(prom_tba), %o1
- stx %g7, [%o1]
+ /* This is meant to allow the sharing of this code between
+ * boot processor invocation (via setup_tba() below) and
+ * secondary processor startup (via trampoline.S). The
+ * former does use this code, the latter does not yet due
+ * to some complexities. That should be fixed up at some
+ * point.
+ *
+ * There used to be enormous complexity wrt. transferring
+ * over from the firwmare's trap table to the Linux kernel's.
+ * For example, there was a chicken & egg problem wrt. building
+ * the OBP page tables, yet needing to be on the Linux kernel
+ * trap table (to translate PAGE_OFFSET addresses) in order to
+ * do that.
+ *
+ * We now handle OBP tlb misses differently, via linear lookups
+ * into the prom_trans[] array. So that specific problem no
+ * longer exists. Yet, unfortunately there are still some issues
+ * preventing trampoline.S from using this code... ho hum.
+ */
+ .globl setup_trap_table
+setup_trap_table:
+ save %sp, -192, %sp
- /* Setup "Linux" globals 8-) */
+ /* Force interrupts to be disabled. */
rdpr %pstate, %o1
- mov %g6, %o2
- wrpr %o1, (PSTATE_AG|PSTATE_IE), %pstate
- sethi %hi(sparc64_ttable_tl0), %g1
- wrpr %g1, %tba
- mov %o2, %g6
+ andn %o1, PSTATE_IE, %o1
+ wrpr %o1, 0x0, %pstate
+ wrpr %g0, 15, %pil
- /* Set up MMU globals */
- wrpr %o1, (PSTATE_MG|PSTATE_IE), %pstate
-
- /* Set fixed globals used by dTLB miss handler. */
-#define KERN_HIGHBITS ((_PAGE_VALID|_PAGE_SZ4MB)^0xfffff80000000000)
-#define KERN_LOWBITS (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W)
+ /* Make the firmware call to jump over to the Linux trap table. */
+ call prom_set_trap_table
+ sethi %hi(sparc64_ttable_tl0), %o0
- mov TSB_REG, %g1
- stxa %g0, [%g1] ASI_DMMU
- membar #Sync
- stxa %g0, [%g1] ASI_IMMU
+ /* Start using proper page size encodings in ctx register. */
+ sethi %hi(sparc64_kern_pri_context), %g3
+ ldx [%g3 + %lo(sparc64_kern_pri_context)], %g2
+ mov PRIMARY_CONTEXT, %g1
+ stxa %g2, [%g1] ASI_DMMU
membar #Sync
- mov TLB_SFSR, %g1
- sethi %uhi(KERN_HIGHBITS), %g2
- or %g2, %ulo(KERN_HIGHBITS), %g2
- sllx %g2, 32, %g2
- or %g2, KERN_LOWBITS, %g2
-
- BRANCH_IF_ANY_CHEETAH(g3,g7,cheetah_vpte_base)
- ba,pt %xcc, spitfire_vpte_base
- nop
-
-cheetah_vpte_base:
- sethi %uhi(VPTE_BASE_CHEETAH), %g3
- or %g3, %ulo(VPTE_BASE_CHEETAH), %g3
- ba,pt %xcc, 2f
- sllx %g3, 32, %g3
-
-spitfire_vpte_base:
- sethi %uhi(VPTE_BASE_SPITFIRE), %g3
- or %g3, %ulo(VPTE_BASE_SPITFIRE), %g3
- sllx %g3, 32, %g3
-
-2:
- clr %g7
-#undef KERN_HIGHBITS
-#undef KERN_LOWBITS
/* Kill PROM timer */
sethi %hi(0x80000000), %o2
sllx %o2, 32, %o2
wr %o2, %asr25
- /* Ok, we're done setting up all the state our trap mechanims needs,
- * now get back into normal globals and let the PROM know what is up.
- */
2:
wrpr %g0, %g0, %wstate
- wrpr %o1, PSTATE_IE, %pstate
call init_irqwork_curcpu
nop
- call prom_set_trap_table
- sethi %hi(sparc64_ttable_tl0), %o0
-
- BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g2,g3,1f)
- ba,pt %xcc, 2f
- nop
-
-1: /* Start using proper page size encodings in ctx register. */
- sethi %uhi(CTX_CHEETAH_PLUS_NUC), %g3
- mov PRIMARY_CONTEXT, %g1
- sllx %g3, 32, %g3
- sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2
- or %g3, %g2, %g3
- stxa %g3, [%g1] ASI_DMMU
- membar #Sync
-
-2:
+ /* Now we can turn interrupts back on. */
rdpr %pstate, %o1
or %o1, PSTATE_IE, %o1
wrpr %o1, 0, %pstate
+ wrpr %g0, 0x0, %pil
+
+ ret
+ restore
+
+ .globl setup_tba
+setup_tba: /* i0 = is_starfire */
+ save %sp, -192, %sp
+
+ /* The boot processor is the only cpu which invokes this
+ * routine, the other cpus set things up via trampoline.S.
+ * So save the OBP trap table address here.
+ */
+ rdpr %tba, %g7
+ sethi %hi(prom_tba), %o1
+ or %o1, %lo(prom_tba), %o1
+ stx %g7, [%o1]
+
+ call setup_trap_table
+ nop
ret
restore
+sparc64_boot_end:
+
+#include "systbls.S"
+#include "ktlb.S"
+#include "tsb.S"
+#include "etrap.S"
+#include "rtrap.S"
+#include "winfixup.S"
+#include "entry.S"
/*
- * The following skips make sure the trap table in ttable.S is aligned
+ * The following skip makes sure the trap table in ttable.S is aligned
* on a 32K boundary as required by the v9 specs for TBA register.
*/
-sparc64_boot_end:
- .skip 0x2000 + _start - sparc64_boot_end
-bootup_user_stack_end:
- .skip 0x2000
+1:
+ .skip 0x4000 + _start - 1b
#ifdef CONFIG_SBUS
/* This is just a hack to fool make depend config.h discovering
! 0x0000000000408000
#include "ttable.S"
-#include "systbls.S"
-#include "ktlb.S"
-#include "etrap.S"
-#include "rtrap.S"
-#include "winfixup.S"
-#include "entry.S"
-
- /* This is just anal retentiveness on my part... */
- .align 16384
.data
.align 8
prom_tba: .xword 0
tlb_type: .word 0 /* Must NOT end up in BSS */
.section ".fixup",#alloc,#execinstr
- .globl __ret_efault
+
+ .globl __ret_efault, __retl_efault
__ret_efault:
ret
restore %g0, -EFAULT, %o0
-
+__retl_efault:
+ retl
+ mov -EFAULT, %o0