[PATCH] ppc32: Kill init on unhandled synchronous signals

[linux-2.6] / arch / ppc / kernel / head_44x.S

diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S
index 9b6a8e5136570537adca7dc8ddf244a8fac19cfd..599245b0407ed44d89def0d910bd9dff449f544e 100644 (file)
--- a/arch/ppc/kernel/head_44x.S
+++ b/arch/ppc/kernel/head_44x.S
@@ -40,7 +40,7 @@
 #include <asm/cputable.h>
 #include <asm/thread_info.h>
 #include <asm/ppc_asm.h>
-#include <asm/offsets.h>
+#include <asm/asm-offsets.h>
 #include "head_booke.h"
 
 
@@ -179,24 +179,26 @@ skpinv:   addi    r4,r4,1                         /* Increment */
 4:
 #ifdef CONFIG_SERIAL_TEXT_DEBUG
        /*
-        * Add temporary UART mapping for early debug.  This
-        * mapping must be identical to that used by the early
-        * bootloader code since the same asm/serial.h parameters
-        * are used for polled operation.
+        * Add temporary UART mapping for early debug.
+        * We can map UART registers wherever we want as long as they don't
+        * interfere with other system mappings (e.g. with pinned entries).
+        * For an example of how we handle this - see ocotea.h.       --ebs
         */
        /* pageid fields */
        lis     r3,UART0_IO_BASE@h
-       ori     r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
+       ori     r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_4K
 
        /* xlat fields */
        lis     r4,UART0_PHYS_IO_BASE@h         /* RPN depends on SoC */
+#ifndef CONFIG_440EP
        ori     r4,r4,0x0001            /* ERPN is 1 for second 4GB page */
+#endif
 
        /* attrib fields */
        li      r5,0
        ori     r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G)
 
-        li      r0,1                    /* TLB slot 1 */
+        li      r0,0                    /* TLB slot 0 */
 
        tlbwe   r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
        tlbwe   r4,r0,PPC44x_TLB_XLAT   /* Load the translation fields */
@@ -228,6 +230,16 @@ skpinv:    addi    r4,r4,1                         /* Increment */
        lis     r4,interrupt_base@h     /* IVPR only uses the high 16-bits */
        mtspr   SPRN_IVPR,r4
 
+#ifdef CONFIG_440EP
+       /* Clear DAPUIB flag in CCR0 (enable APU between CPU and FPU) */
+       mfspr   r2,SPRN_CCR0
+       lis     r3,0xffef
+       ori     r3,r3,0xffff
+       and     r2,r2,r3
+       mtspr   SPRN_CCR0,r2
+       isync
+#endif
+
        /*
         * This is where the main kernel code starts.
         */
@@ -330,8 +342,9 @@ interrupt_base:
        /* If we are faulting a kernel address, we have to use the
         * kernel page tables.
         */
-       andis.  r11, r10, 0x8000
-       beq     3f
+       lis     r11, TASK_SIZE@h
+       cmplw   r10, r11
+       blt+    3f
        lis     r11, swapper_pg_dir@h
        ori     r11, r11, swapper_pg_dir@l
 
@@ -449,7 +462,11 @@ interrupt_base:
 
        /* Watchdog Timer Interrupt */
        /* TODO: Add watchdog support */
+#ifdef CONFIG_BOOKE_WDT
+       CRITICAL_EXCEPTION(0x1020, WatchdogTimer, WatchdogException)
+#else
        CRITICAL_EXCEPTION(0x1020, WatchdogTimer, UnknownException)
+#endif
 
        /* Data TLB Error Interrupt */
        START_EXCEPTION(DataTLBError)
@@ -464,8 +481,9 @@ interrupt_base:
        /* If we are faulting a kernel address, we have to use the
         * kernel page tables.
         */
-       andis.  r11, r10, 0x8000
-       beq     3f
+       lis     r11, TASK_SIZE@h
+       cmplw   r10, r11
+       blt+    3f
        lis     r11, swapper_pg_dir@h
        ori     r11, r11, swapper_pg_dir@l
 
@@ -533,8 +551,9 @@ interrupt_base:
        /* If we are faulting a kernel address, we have to use the
         * kernel page tables.
         */
-       andis.  r11, r10, 0x8000
-       beq     3f
+       lis     r11, TASK_SIZE@h
+       cmplw   r10, r11
+       blt+    3f
        lis     r11, swapper_pg_dir@h
        ori     r11, r11, swapper_pg_dir@l