#include <asm/cache.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
-#include <asm/offsets.h>
+#include <asm/asm-offsets.h>
#ifdef CONFIG_APUS
#include <asm/amigappc.h>
EXC_XFER_STD(0x480, UnknownException)
#endif /* CONFIG_PPC64BRIDGE */
-/*
- * This task wants to use the FPU now.
- * On UP, disable FP for the task which had the FPU previously,
- * and save its floating-point registers in its thread_struct.
- * Load up this task's FP registers from its thread_struct,
- * enable the FPU for the current task and return to the task.
- */
-load_up_fpu:
- mfmsr r5
- ori r5,r5,MSR_FP
-#ifdef CONFIG_PPC64BRIDGE
- clrldi r5,r5,1 /* turn off 64-bit mode */
-#endif /* CONFIG_PPC64BRIDGE */
- SYNC
- MTMSRD(r5) /* enable use of fpu now */
- isync
-/*
- * For SMP, we don't do lazy FPU switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another. Instead we call giveup_fpu in switch_to.
- */
-#ifndef CONFIG_SMP
- tophys(r6,0) /* get __pa constant */
- addis r3,r6,last_task_used_math@ha
- lwz r4,last_task_used_math@l(r3)
- cmpwi 0,r4,0
- beq 1f
- add r4,r4,r6
- addi r4,r4,THREAD /* want last_task_used_math->thread */
- SAVE_32FPRS(0, r4)
- mffs fr0
- stfd fr0,THREAD_FPSCR-4(r4)
- lwz r5,PT_REGS(r4)
- add r5,r5,r6
- lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- li r10,MSR_FP|MSR_FE0|MSR_FE1
- andc r4,r4,r10 /* disable FP for previous task */
- stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
- /* enable use of FP after return */
- mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */
- lwz r4,THREAD_FPEXC_MODE(r5)
- ori r9,r9,MSR_FP /* enable FP for current */
- or r9,r9,r4
- lfd fr0,THREAD_FPSCR-4(r5)
- mtfsf 0xff,fr0
- REST_32FPRS(0, r5)
-#ifndef CONFIG_SMP
- subi r4,r5,THREAD
- sub r4,r4,r6
- stw r4,last_task_used_math@l(r3)
-#endif /* CONFIG_SMP */
- /* restore registers and return */
- /* we haven't used ctr or xer or lr */
- /* fall through to fast_exception_return */
-
- .globl fast_exception_return
-fast_exception_return:
- andi. r10,r9,MSR_RI /* check for recoverable interrupt */
- beq 1f /* if not, we've got problems */
-2: REST_4GPRS(3, r11)
- lwz r10,_CCR(r11)
- REST_GPR(1, r11)
- mtcr r10
- lwz r10,_LINK(r11)
- mtlr r10
- REST_GPR(10, r11)
- mtspr SPRN_SRR1,r9
- mtspr SPRN_SRR0,r12
- REST_GPR(9, r11)
- REST_GPR(12, r11)
- lwz r11,GPR11(r11)
- SYNC
- RFI
-
-/* check if the exception happened in a restartable section */
-1: lis r3,exc_exit_restart_end@ha
- addi r3,r3,exc_exit_restart_end@l
- cmplw r12,r3
- bge 3f
- lis r4,exc_exit_restart@ha
- addi r4,r4,exc_exit_restart@l
- cmplw r12,r4
- blt 3f
- lis r3,fee_restarts@ha
- tophys(r3,r3)
- lwz r5,fee_restarts@l(r3)
- addi r5,r5,1
- stw r5,fee_restarts@l(r3)
- mr r12,r4 /* restart at exc_exit_restart */
- b 2b
-
- .comm fee_restarts,4
-
-/* aargh, a nonrecoverable interrupt, panic */
-/* aargh, we don't know which trap this is */
-/* but the 601 doesn't implement the RI bit, so assume it's OK */
-3:
-BEGIN_FTR_SECTION
- b 2b
-END_FTR_SECTION_IFSET(CPU_FTR_601)
- li r10,-1
- stw r10,TRAP(r11)
- addi r3,r1,STACK_FRAME_OVERHEAD
- li r10,MSR_KERNEL
- bl transfer_to_handler_full
- .long nonrecoverable_exception
- .long ret_from_except
-
-/*
- * FP unavailable trap from kernel - print a message, but let
- * the task use FP in the kernel until it returns to user mode.
- */
-KernelFP:
- lwz r3,_MSR(r1)
- ori r3,r3,MSR_FP
- stw r3,_MSR(r1) /* enable use of FP after return */
- lis r3,86f@h
- ori r3,r3,86f@l
- mr r4,r2 /* current */
- lwz r5,_NIP(r1)
- bl printk
- b ret_from_except
-86: .string "floating point used in kernel (task=%p, pc=%x)\n"
- .align 4,0
-
#ifdef CONFIG_ALTIVEC
/* Note that the AltiVec support is closely modeled after the FP
* support. Changes to one are likely to be applicable to the
blr
#endif /* CONFIG_ALTIVEC */
-/*
- * giveup_fpu(tsk)
- * Disable FP for the task given as the argument,
- * and save the floating-point registers in its thread_struct.
- * Enables the FPU for use in the kernel on return.
- */
- .globl giveup_fpu
-giveup_fpu:
- mfmsr r5
- ori r5,r5,MSR_FP
- SYNC_601
- ISYNC_601
- MTMSRD(r5) /* enable use of fpu now */
- SYNC_601
- isync
- cmpwi 0,r3,0
- beqlr- /* if no previous owner, done */
- addi r3,r3,THREAD /* want THREAD of task */
- lwz r5,PT_REGS(r3)
- cmpwi 0,r5,0
- SAVE_32FPRS(0, r3)
- mffs fr0
- stfd fr0,THREAD_FPSCR-4(r3)
- beq 1f
- lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- li r3,MSR_FP|MSR_FE0|MSR_FE1
- andc r4,r4,r3 /* disable FP for previous task */
- stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
- li r5,0
- lis r4,last_task_used_math@ha
- stw r5,last_task_used_math@l(r4)
-#endif /* CONFIG_SMP */
- blr
-
/*
* This code is jumped to from the startup code to copy
* the kernel image to physical address 0.
projects / linux-2.6 / blobdiff