mainmenu "Linux/PowerPC Kernel Configuration"
+config WORD_SIZE
+ int
+ default 32
+
config MMU
bool
default y
config 8xx
bool "8xx"
+ select PPC_LIB_RHEAP
config E200
bool "e200"
Select PReP if configuring for a PReP machine.
- Select Gemini if configuring for a Synergy Microsystems' Gemini
- series Single Board Computer. More information is available at:
- <http://www.synergymicro.com/PressRel/97_10_15.html>.
-
- Select APUS if configuring for a PowerUP Amiga. More information is
- available at: <http://linux-apus.sourceforge.net/>.
-
config PPC_PREP
bool "PReP"
-config APUS
- bool "Amiga-APUS"
- depends on BROKEN
- help
- Select APUS if configuring for a PowerUP Amiga.
- More information is available at:
- <http://linux-apus.sourceforge.net/>.
-
config KATANA
bool "Artesyn-Katana"
help
config CPM2
bool
depends on 8260 || MPC8560 || MPC8555
+ select PPC_LIB_RHEAP
default y
help
The CPM2 (Communications Processor Module) is a coprocessor on
some command-line options at build time by entering them here. In
most cases you will need to specify the root device here.
-config AMIGA
- bool
- depends on APUS
- default y
- help
- This option enables support for the Amiga series of computers.
-
-config ZORRO
- bool
- depends on APUS
- default y
- help
- This enables support for the Zorro bus in the Amiga. If you have
- expansion cards in your Amiga that conform to the Amiga
- AutoConfig(tm) specification, say Y, otherwise N. Note that even
- expansion cards that do not fit in the Zorro slots but fit in e.g.
- the CPU slot may fall in this category, so you have to say Y to let
- Linux use these.
-
-config ABSTRACT_CONSOLE
- bool
- depends on APUS
- default y
-
-config APUS_FAST_EXCEPT
- bool
- depends on APUS
- default y
-
-config AMIGA_PCMCIA
- bool "Amiga 1200/600 PCMCIA support"
- depends on APUS && EXPERIMENTAL
- help
- Include support in the kernel for pcmcia on Amiga 1200 and Amiga
- 600. If you intend to use pcmcia cards say Y; otherwise say N.
-
-config AMIGA_BUILTIN_SERIAL
- tristate "Amiga builtin serial support"
- depends on APUS
- help
- If you want to use your Amiga's built-in serial port in Linux,
- answer Y.
-
- To compile this driver as a module, choose M here.
-
-config GVPIOEXT
- tristate "GVP IO-Extender support"
- depends on APUS
- help
- If you want to use a GVP IO-Extender serial card in Linux, say Y.
- Otherwise, say N.
-
-config GVPIOEXT_LP
- tristate "GVP IO-Extender parallel printer support"
- depends on GVPIOEXT
- help
- Say Y to enable driving a printer from the parallel port on your
- GVP IO-Extender card, N otherwise.
-
-config GVPIOEXT_PLIP
- tristate "GVP IO-Extender PLIP support"
- depends on GVPIOEXT
- help
- Say Y to enable doing IP over the parallel port on your GVP
- IO-Extender card, N otherwise.
-
-config MULTIFACE_III_TTY
- tristate "Multiface Card III serial support"
- depends on APUS
- help
- If you want to use a Multiface III card's serial port in Linux,
- answer Y.
-
- To compile this driver as a module, choose M here.
-
-config A2232
- tristate "Commodore A2232 serial support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && APUS
- ---help---
- This option supports the 2232 7-port serial card shipped with the
- Amiga 2000 and other Zorro-bus machines, dating from 1989. At
- a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
- each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
- ports were connected with 8 pin DIN connectors on the card bracket,
- for which 8 pin to DB25 adapters were supplied. The card also had
- jumpers internally to toggle various pinning configurations.
-
- This driver can be built as a module; but then "generic_serial"
- will also be built as a module. This has to be loaded before
- "ser_a2232". If you want to do this, answer M here.
-
-config WHIPPET_SERIAL
- tristate "Hisoft Whippet PCMCIA serial support"
- depends on AMIGA_PCMCIA
- help
- HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
- is no listing for the Whippet in their Amiga section.
-
-config APNE
- tristate "PCMCIA NE2000 support"
- depends on AMIGA_PCMCIA
- help
- If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
- say N.
-
- To compile this driver as a module, choose M here: the
- module will be called apne.
-
-config SERIAL_CONSOLE
- bool "Support for serial port console"
- depends on APUS && (AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y)
-
-config HEARTBEAT
- bool "Use power LED as a heartbeat"
- depends on APUS
- help
- Use the power-on LED on your machine as a load meter. The exact
- behavior is platform-dependent, but normally the flash frequency is
- a hyperbolic function of the 5-minute load average.
-
-config PROC_HARDWARE
- bool "/proc/hardware support"
- depends on APUS
-
-source "drivers/zorro/Kconfig"
-
-if !44x || BROKEN
+if BROKEN
source kernel/power/Kconfig
endif
config PCI
bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx
- default y if !40x && !CPM2 && !8xx && !APUS && !83xx && !85xx
- default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
+ default y if !40x && !CPM2 && !8xx && !83xx && !85xx
default PCI_QSPAN if !4xx && !CPM2 && 8xx
help
Find out whether your system includes a PCI bus. PCI is the name of
infrastructure code to support PCI bus devices.
config PCI_DOMAINS
- bool
- default PCI
+ def_bool PCI
+
+config PCI_SYSCALL
+ def_bool PCI
config MPC83xx_PCI2
bool "Support for 2nd PCI host controller"
endchoice
-config PCI_PERMEDIA
- bool "PCI for Permedia2"
- depends on !4xx && !8xx && APUS
-
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
config PIN_TLB
bool "Pinned Kernel TLBs (860 ONLY)"
depends on ADVANCED_OPTIONS && 8xx
+
+config PPC_LIB_RHEAP
+ bool
+
endmenu
source "net/Kconfig"
source "lib/Kconfig"
-source "arch/powerpc/oprofile/Kconfig"
+source "kernel/Kconfig.instrumentation"
source "arch/ppc/Kconfig.debug"
projects / linux-2.6 / blobdiff