switch (len) {
case 1:
out_8(addr, val);
- (void) in_8(addr);
break;
case 2:
out_le16(addr, val);
- (void) in_le16(addr);
break;
default:
out_le32(addr, val);
- (void) in_le32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
static struct pci_ops u3_agp_pci_ops =
{
- u3_agp_read_config,
- u3_agp_write_config
+ .read = u3_agp_read_config,
+ .write = u3_agp_write_config,
};
static unsigned long u3_ht_cfa0(u8 devfn, u8 off)
switch (len) {
case 1:
out_8(addr, val);
- (void) in_8(addr);
break;
case 2:
out_le16(addr, val);
- (void) in_le16(addr);
break;
default:
out_le32(addr, val);
- (void) in_le32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
static struct pci_ops u3_ht_pci_ops =
{
- u3_ht_read_config,
- u3_ht_write_config
+ .read = u3_ht_read_config,
+ .write = u3_ht_write_config,
};
static unsigned int u4_pcie_cfa0(unsigned int devfn, unsigned int off)
switch (len) {
case 1:
out_8(addr, val);
- (void) in_8(addr);
break;
case 2:
out_le16(addr, val);
- (void) in_le16(addr);
break;
default:
out_le32(addr, val);
- (void) in_le32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
static struct pci_ops u4_pcie_pci_ops =
{
- u4_pcie_read_config,
- u4_pcie_write_config
+ .read = u4_pcie_read_config,
+ .write = u4_pcie_write_config,
};
static void __init setup_u3_agp(struct pci_controller* hose)
* safe assumptions hopefully.
*/
if (u3_agp) {
- struct device_node *np = u3_agp->arch_data;
+ struct device_node *np = u3_agp->dn;
PCI_DN(np)->busno = 0xf0;
for (np = np->child; np; np = np->sibling)
PCI_DN(np)->busno = 0xf0;
}
return irq;
}
-
-/* XXX: To remove once all firmwares are ok */
-static void fixup_maple_ide(struct pci_dev* dev)
-{
- if (!machine_is(maple))
- return;
-
-#if 0 /* Enable this to enable IDE port 0 */
- {
- u8 v;
-
- pci_read_config_byte(dev, 0x40, &v);
- v |= 2;
- pci_write_config_byte(dev, 0x40, v);
- }
-#endif
-#if 0 /* fix bus master base */
- pci_write_config_dword(dev, 0x20, 0xcc01);
- printk("old ide resource: %lx -> %lx \n",
- dev->resource[4].start, dev->resource[4].end);
- dev->resource[4].start = 0xcc00;
- dev->resource[4].end = 0xcc10;
-#endif
-#if 0 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */
- {
- struct pci_dev *apicdev;
- u32 v;
-
- apicdev = pci_get_slot (dev->bus, PCI_DEVFN(5,0));
- if (apicdev == NULL)
- printk("IDE Fixup IRQ: Can't find IO-APIC !\n");
- else {
- pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*14);
- pci_read_config_dword(apicdev, 0xf4, &v);
- v &= ~0x00000022;
- pci_write_config_dword(apicdev, 0xf4, v);
- pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*15);
- pci_read_config_dword(apicdev, 0xf4, &v);
- v &= ~0x00000022;
- pci_write_config_dword(apicdev, 0xf4, v);
- pci_dev_put(apicdev);
- }
- }
-#endif
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE,
- fixup_maple_ide);