#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/pci.h>
-#include <linux/version.h>
+#include <linux/utsrelease.h>
#include <linux/adb.h>
#include <linux/module.h>
#include <linux/delay.h>
* has to include <linux/interrupt.h> (to get irqreturn_t), which
* causes all sorts of problems. -- paulus
*/
-extern irqreturn_t xmon_irq(int, void *, struct pt_regs *);
+extern irqreturn_t xmon_irq(int, void *);
extern unsigned long loops_per_jiffy;
+/* To be replaced by RTAS when available */
+static unsigned int *briq_SPOR;
+
#ifdef CONFIG_SMP
extern struct smp_ops_t chrp_smp_ops;
#endif
"Disabled", "Write-Through", "Copy-Back", "Transparent Mode"
};
+static const char *chrp_names[] = {
+ "Unknown",
+ "","","",
+ "Motorola",
+ "IBM or Longtrail",
+ "Genesi Pegasos",
+ "Total Impact Briq"
+};
+
void chrp_show_cpuinfo(struct seq_file *m)
{
int i, sdramen;
/* Enable L2 cache if needed */
np = find_type_devices("cpu");
if (np != NULL) {
- unsigned int *l2cr = (unsigned int *)
- get_property (np, "l2cr", NULL);
+ const unsigned int *l2cr = get_property(np, "l2cr", NULL);
if (l2cr == NULL) {
printk ("Pegasos l2cr : no cpu l2cr property found\n");
return;
}
}
+static void briq_restart(char *cmd)
+{
+ local_irq_disable();
+ if (briq_SPOR)
+ out_be32(briq_SPOR, 0);
+ for(;;);
+}
+
void __init chrp_setup_arch(void)
{
struct device_node *root = find_path_device ("/");
- char *machine = NULL;
+ const char *machine = NULL;
/* init to some ~sane value until calibrate_delay() runs */
loops_per_jiffy = 50000000/HZ;
_chrp_type = _CHRP_IBM;
} else if (machine && strncmp(machine, "MOT", 3) == 0) {
_chrp_type = _CHRP_Motorola;
+ } else if (machine && strncmp(machine, "TotalImpact,BRIQ-1", 18) == 0) {
+ _chrp_type = _CHRP_briq;
+ /* Map the SPOR register on briq and change the restart hook */
+ briq_SPOR = (unsigned int *)ioremap(0xff0000e8, 4);
+ ppc_md.restart = briq_restart;
} else {
/* Let's assume it is an IBM chrp if all else fails */
_chrp_type = _CHRP_IBM;
}
- printk("chrp type = %x\n", _chrp_type);
+ printk("chrp type = %x [%s]\n", _chrp_type, chrp_names[_chrp_type]);
rtas_initialize();
if (rtas_token("display-character") >= 0)
pci_create_OF_bus_map();
-#ifdef CONFIG_SMP
- smp_ops = &chrp_smp_ops;
-#endif /* CONFIG_SMP */
-
/*
* Print the banner, then scroll down so boot progress
* can be printed. -- Cort
jiffies + event_scan_interval);
}
-static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc,
- struct pt_regs *regs)
+static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc)
{
- unsigned int cascade_irq = i8259_irq(regs);
+ unsigned int cascade_irq = i8259_irq();
if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq, regs);
+ generic_handle_irq(cascade_irq);
desc->chip->eoi(irq);
}
struct device_node *np, *root;
int len, i, j;
int isu_size, idu_size;
- unsigned int *iranges, *opprop = NULL;
+ const unsigned int *iranges, *opprop = NULL;
int oplen = 0;
unsigned long opaddr;
int na = 1;
return;
root = of_find_node_by_path("/");
if (root) {
- opprop = (unsigned int *) get_property
- (root, "platform-open-pic", &oplen);
+ opprop = get_property(root, "platform-open-pic", &oplen);
na = prom_n_addr_cells(root);
}
if (opprop && oplen >= na * sizeof(unsigned int)) {
printk(KERN_INFO "OpenPIC at %lx\n", opaddr);
- iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len);
+ iranges = get_property(np, "interrupt-ranges", &len);
if (iranges == NULL)
len = 0; /* non-distributed mpic */
else
* from anyway
*/
for (np = find_devices("pci"); np != NULL; np = np->next) {
- unsigned int *addrp = (unsigned int *)
- get_property(np, "8259-interrupt-acknowledge", NULL);
+ const unsigned int *addrp = get_property(np,
+ "8259-interrupt-acknowledge", NULL);
if (addrp == NULL)
continue;
" address, polling\n");
i8259_init(pic, chrp_int_ack);
- if (ppc_md.get_irq == NULL)
+ if (ppc_md.get_irq == NULL) {
ppc_md.get_irq = i8259_irq;
+ irq_set_default_host(i8259_get_host());
+ }
if (chrp_mpic != NULL) {
cascade_irq = irq_of_parse_and_map(pic, 0);
if (cascade_irq == NO_IRQ)
chrp_find_openpic();
chrp_find_8259();
+#ifdef CONFIG_SMP
+ /* Pegasos has no MPIC, those ops would make it crash. It might be an
+ * option to move setting them to after we probe the PIC though
+ */
+ if (chrp_mpic != NULL)
+ smp_ops = &chrp_smp_ops;
+#endif /* CONFIG_SMP */
+
if (_chrp_type == _CHRP_Pegasos)
ppc_md.get_irq = i8259_irq;
chrp_init2(void)
{
struct device_node *device;
- unsigned int *p = NULL;
+ const unsigned int *p = NULL;
#ifdef CONFIG_NVRAM
chrp_nvram_init();
*/
device = find_devices("rtas");
if (device)
- p = (unsigned int *) get_property
- (device, "rtas-event-scan-rate", NULL);
+ p = get_property(device, "rtas-event-scan-rate", NULL);
if (p && *p) {
/*
* Arrange to call chrp_event_scan at least *p times