static int next_controller_index;
struct pci_controller * __init
-pcibios_alloc_controller(void)
+pcibios_alloc_controller(struct device_node *dev)
{
struct pci_controller *hose;
*hose_tail = hose;
hose_tail = &hose->next;
- hose->index = next_controller_index++;
+ hose->global_number = next_controller_index++;
+ hose->arch_data = dev;
return hose;
}
/* Are we a root bus ? */
if (bus->self == NULL || bus->parent == NULL) {
- struct pci_controller *hose = pci_bus_to_hose(bus->number);
+ struct pci_controller *hose = pci_bus_to_host(bus);
if (hose == NULL)
return NULL;
return of_node_get(hose->arch_data);
}
}
-static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct pci_dev *pdev;
- struct device_node *np;
-
- pdev = to_pci_dev (dev);
- np = pci_device_to_OF_node(pdev);
- if (np == NULL || np->full_name == NULL)
- return 0;
- return sprintf(buf, "%s", np->full_name);
-}
-static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
-
#else /* CONFIG_PPC_OF */
void pcibios_make_OF_bus_map(void)
{
}
#endif /* CONFIG_PPC_OF */
-/* Add sysfs properties */
-void pcibios_add_platform_entries(struct pci_dev *pdev)
-{
-#ifdef CONFIG_PPC_OF
- device_create_file(&pdev->dev, &dev_attr_devspec);
-#endif /* CONFIG_PPC_OF */
-}
-
-
#ifdef CONFIG_PPC_PMAC
/*
* This set of routines checks for PCI<->PCI bridges that have closed
subsys_initcall(pcibios_init);
-unsigned long resource_fixup(struct pci_dev * dev, struct resource * res,
- unsigned long start, unsigned long size)
-{
- return start;
-}
-
void __init pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
if (!res->flags) {
if (io_offset)
printk(KERN_ERR "I/O resource not set for host"
- " bridge %d\n", hose->index);
+ " bridge %d\n", hose->global_number);
res->start = 0;
res->end = IO_SPACE_LIMIT;
res->flags = IORESOURCE_IO;
if (i > 0)
continue;
printk(KERN_ERR "Memory resource not set for "
- "host bridge %d\n", hose->index);
+ "host bridge %d\n", hose->global_number);
res->start = hose->pci_mem_offset;
res->end = ~0U;
res->flags = IORESOURCE_MEM;
for (i = 0; i < 4; ++i) {
if ((res = bus->resource[i]) == NULL)
continue;
- if (!res->flags)
+ if (!res->flags || bus->self->transparent)
continue;
if (io_offset && (res->flags & IORESOURCE_IO)) {
res->start += io_offset;
}
}
-char __init *pcibios_setup(char *str)
-{
- return str;
-}
-
/* the next one is stolen from the alpha port... */
void __init
pcibios_update_irq(struct pci_dev *dev, int irq)
/* XXX FIXME - update OF device tree node interrupt property */
}
-#ifdef CONFIG_PPC_MERGE
-/* XXX This is a copy of the ppc64 version. This is temporary until we start
- * merging the 2 PCI layers
- */
-/*
- * Reads the interrupt pin to determine if interrupt is use by card.
- * If the interrupt is used, then gets the interrupt line from the
- * openfirmware and sets it in the pci_dev and pci_config line.
- */
-int pci_read_irq_line(struct pci_dev *pci_dev)
-{
- struct of_irq oirq;
- unsigned int virq;
-
- DBG("Try to map irq for %s...\n", pci_name(pci_dev));
-
- /* Try to get a mapping from the device-tree */
- if (of_irq_map_pci(pci_dev, &oirq)) {
- u8 line, pin;
-
- /* If that fails, lets fallback to what is in the config
- * space and map that through the default controller. We
- * also set the type to level low since that's what PCI
- * interrupts are. If your platform does differently, then
- * either provide a proper interrupt tree or don't use this
- * function.
- */
- if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
- return -1;
- if (pin == 0)
- return -1;
- if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
- line == 0xff) {
- return -1;
- }
- DBG(" -> no map ! Using irq line %d from PCI config\n", line);
-
- virq = irq_create_mapping(NULL, line);
- if (virq != NO_IRQ)
- set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
- } else {
- DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
- oirq.size, oirq.specifier[0], oirq.controller->full_name);
-
- virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
- oirq.size);
- }
- if(virq == NO_IRQ) {
- DBG(" -> failed to map !\n");
- return -1;
- }
- pci_dev->irq = virq;
-
- return 0;
-}
-EXPORT_SYMBOL(pci_read_irq_line);
-#endif /* CONFIG_PPC_MERGE */
-
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
u16 cmd, old_cmd;
return 0;
}
-struct pci_controller*
+static struct pci_controller*
pci_bus_to_hose(int bus)
{
struct pci_controller* hose = hose_head;
return NULL;
}
-void __iomem *
-pci_bus_io_base(unsigned int bus)
-{
- struct pci_controller *hose;
-
- hose = pci_bus_to_hose(bus);
- if (!hose)
- return NULL;
- return hose->io_base_virt;
-}
-
-unsigned long
-pci_bus_io_base_phys(unsigned int bus)
-{
- struct pci_controller *hose;
-
- hose = pci_bus_to_hose(bus);
- if (!hose)
- return 0;
- return hose->io_base_phys;
-}
-
-unsigned long
-pci_bus_mem_base_phys(unsigned int bus)
-{
- struct pci_controller *hose;
-
- hose = pci_bus_to_hose(bus);
- if (!hose)
- return 0;
- return hose->pci_mem_offset;
-}
-
-unsigned long
-pci_resource_to_bus(struct pci_dev *pdev, struct resource *res)
-{
- /* Hack alert again ! See comments in chrp_pci.c
- */
- struct pci_controller* hose =
- (struct pci_controller *)pdev->sysdata;
- if (hose && res->flags & IORESOURCE_MEM)
- return res->start - hose->pci_mem_offset;
- /* We may want to do something with IOs here... */
- return res->start;
-}
-
-
-static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
- resource_size_t *offset,
- enum pci_mmap_state mmap_state)
-{
- struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
- unsigned long io_offset = 0;
- int i, res_bit;
-
- if (hose == 0)
- return NULL; /* should never happen */
-
- /* If memory, add on the PCI bridge address offset */
- if (mmap_state == pci_mmap_mem) {
-#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
- *offset += hose->pci_mem_offset;
-#endif
- res_bit = IORESOURCE_MEM;
- } else {
- io_offset = hose->io_base_virt - (void __iomem *)_IO_BASE;
- *offset += io_offset;
- res_bit = IORESOURCE_IO;
- }
-
- /*
- * Check that the offset requested corresponds to one of the
- * resources of the device.
- */
- for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
- struct resource *rp = &dev->resource[i];
- int flags = rp->flags;
-
- /* treat ROM as memory (should be already) */
- if (i == PCI_ROM_RESOURCE)
- flags |= IORESOURCE_MEM;
-
- /* Active and same type? */
- if ((flags & res_bit) == 0)
- continue;
-
- /* In the range of this resource? */
- if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end)
- continue;
-
- /* found it! construct the final physical address */
- if (mmap_state == pci_mmap_io)
- *offset += hose->io_base_phys - io_offset;
- return rp;
- }
-
- return NULL;
-}
-
-/*
- * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
- * device mapping.
- */
-static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
- pgprot_t protection,
- enum pci_mmap_state mmap_state,
- int write_combine)
-{
- unsigned long prot = pgprot_val(protection);
-
- /* Write combine is always 0 on non-memory space mappings. On
- * memory space, if the user didn't pass 1, we check for a
- * "prefetchable" resource. This is a bit hackish, but we use
- * this to workaround the inability of /sysfs to provide a write
- * combine bit
- */
- if (mmap_state != pci_mmap_mem)
- write_combine = 0;
- else if (write_combine == 0) {
- if (rp->flags & IORESOURCE_PREFETCH)
- write_combine = 1;
- }
-
- /* XXX would be nice to have a way to ask for write-through */
- prot |= _PAGE_NO_CACHE;
- if (write_combine)
- prot &= ~_PAGE_GUARDED;
- else
- prot |= _PAGE_GUARDED;
-
- return __pgprot(prot);
-}
-
-/*
- * This one is used by /dev/mem and fbdev who have no clue about the
- * PCI device, it tries to find the PCI device first and calls the
- * above routine
- */
-pgprot_t pci_phys_mem_access_prot(struct file *file,
- unsigned long pfn,
- unsigned long size,
- pgprot_t protection)
-{
- struct pci_dev *pdev = NULL;
- struct resource *found = NULL;
- unsigned long prot = pgprot_val(protection);
- unsigned long offset = pfn << PAGE_SHIFT;
- int i;
-
- if (page_is_ram(pfn))
- return __pgprot(prot);
-
- prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;
-
- for_each_pci_dev(pdev) {
- for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
- struct resource *rp = &pdev->resource[i];
- int flags = rp->flags;
-
- /* Active and same type? */
- if ((flags & IORESOURCE_MEM) == 0)
- continue;
- /* In the range of this resource? */
- if (offset < (rp->start & PAGE_MASK) ||
- offset > rp->end)
- continue;
- found = rp;
- break;
- }
- if (found)
- break;
- }
- if (found) {
- if (found->flags & IORESOURCE_PREFETCH)
- prot &= ~_PAGE_GUARDED;
- pci_dev_put(pdev);
- }
-
- DBG("non-PCI map for %lx, prot: %lx\n", offset, prot);
-
- return __pgprot(prot);
-}
-
-
-/*
- * Perform the actual remap of the pages for a PCI device mapping, as
- * appropriate for this architecture. The region in the process to map
- * is described by vm_start and vm_end members of VMA, the base physical
- * address is found in vm_pgoff.
- * The pci device structure is provided so that architectures may make mapping
- * decisions on a per-device or per-bus basis.
- *
- * Returns a negative error code on failure, zero on success.
- */
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state,
- int write_combine)
-{
- resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
- struct resource *rp;
- int ret;
-
- rp = __pci_mmap_make_offset(dev, &offset, mmap_state);
- if (rp == NULL)
- return -EINVAL;
-
- vma->vm_pgoff = offset >> PAGE_SHIFT;
- vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
- vma->vm_page_prot,
- mmap_state, write_combine);
-
- ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
- vma->vm_end - vma->vm_start, vma->vm_page_prot);
-
- return ret;
-}
-
-/* Obsolete functions. Should be removed once the symbios driver
- * is fixed
- */
-unsigned long
-phys_to_bus(unsigned long pa)
-{
- struct pci_controller *hose;
- int i;
-
- for (hose = hose_head; hose; hose = hose->next) {
- for (i = 0; i < 3; ++i) {
- if (pa >= hose->mem_resources[i].start
- && pa <= hose->mem_resources[i].end) {
- /*
- * XXX the hose->pci_mem_offset really
- * only applies to mem_resources[0].
- * We need a way to store an offset for
- * the others. -- paulus
- */
- if (i == 0)
- pa -= hose->pci_mem_offset;
- return pa;
- }
- }
- }
- /* hmmm, didn't find it */
- return 0;
-}
-
-unsigned long
-pci_phys_to_bus(unsigned long pa, int busnr)
-{
- struct pci_controller* hose = pci_bus_to_hose(busnr);
- if (!hose)
- return pa;
- return pa - hose->pci_mem_offset;
-}
-
-unsigned long
-pci_bus_to_phys(unsigned int ba, int busnr)
-{
- struct pci_controller* hose = pci_bus_to_hose(busnr);
- if (!hose)
- return ba;
- return ba + hose->pci_mem_offset;
-}
-
/* Provide information on locations of various I/O regions in physical
* memory. Do this on a per-card basis so that we choose the right
* root bridge.
return result;
}
-void pci_resource_to_user(const struct pci_dev *dev, int bar,
- const struct resource *rsrc,
- resource_size_t *start, resource_size_t *end)
-{
- struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
- resource_size_t offset = 0;
-
- if (hose == NULL)
- return;
-
- if (rsrc->flags & IORESOURCE_IO)
- offset = (unsigned long)hose->io_base_virt - _IO_BASE;
-
- /* We pass a fully fixed up address to userland for MMIO instead of
- * a BAR value because X is lame and expects to be able to use that
- * to pass to /dev/mem !
- *
- * That means that we'll have potentially 64 bits values where some
- * userland apps only expect 32 (like X itself since it thinks only
- * Sparc has 64 bits MMIO) but if we don't do that, we break it on
- * 32 bits CHRPs :-(
- *
- * Hopefully, the sysfs insterface is immune to that gunk. Once X
- * has been fixed (and the fix spread enough), we can re-enable the
- * 2 lines below and pass down a BAR value to userland. In that case
- * we'll also have to re-enable the matching code in
- * __pci_mmap_make_offset().
- *
- * BenH.
- */
-#if 0
- else if (rsrc->flags & IORESOURCE_MEM)
- offset = hose->pci_mem_offset;
-#endif
-
- *start = rsrc->start - offset;
- *end = rsrc->end - offset;
-}
-
-void __init pci_init_resource(struct resource *res, resource_size_t start,
- resource_size_t end, int flags, char *name)
-{
- res->start = start;
- res->end = end;
- res->flags = flags;
- res->name = name;
- res->parent = NULL;
- res->sibling = NULL;
- res->child = NULL;
-}
-
unsigned long pci_address_to_pio(phys_addr_t address)
{
struct pci_controller* hose = hose_head;
projects / linux-2.6 / blobdiff