int index;
/* get clock freq. if present */
- clk = get_property(np, "clock-frequency", NULL);
+ clk = of_get_property(np, "clock-frequency", NULL);
if (clk && *clk)
clock = *clk;
/* get default speed if present */
- spd = get_property(np, "current-speed", NULL);
+ spd = of_get_property(np, "current-speed", NULL);
/* If we have a location index, then try to use it */
if (want_index >= 0 && want_index < MAX_LEGACY_SERIAL_PORTS)
{
u64 addr;
const u32 *addrp;
- upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+ upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ
+ | UPF_FIXED_PORT;
struct device_node *tsi = of_get_parent(np);
/* We only support ports that have a clock frequency properly
* encoded in the device-tree.
*/
- if (get_property(np, "clock-frequency", NULL) == NULL)
+ if (of_get_property(np, "clock-frequency", NULL) == NULL)
+ return -1;
+
+ /* if rtas uses this device, don't try to use it as well */
+ if (of_get_property(np, "used-by-rtas", NULL) != NULL)
return -1;
/* Get the address */
DBG(" -> add_legacy_isa_port(%s)\n", np->full_name);
/* Get the ISA port number */
- reg = get_property(np, "reg", NULL);
+ reg = of_get_property(np, "reg", NULL);
if (reg == NULL)
return -1;
/* Now look for an "ibm,aix-loc" property that gives us ordering
* if any...
*/
- typep = get_property(np, "ibm,aix-loc", NULL);
+ typep = of_get_property(np, "ibm,aix-loc", NULL);
/* If we have a location index, then use it */
if (typep && *typep == 'S')
* compatible UARTs on PCI need all sort of quirks (port offsets
* etc...) that this code doesn't know about
*/
- if (get_property(np, "clock-frequency", NULL) == NULL)
+ if (of_get_property(np, "clock-frequency", NULL) == NULL)
return -1;
/* Get the PCI address. Assume BAR 0 */
* we get to their "reg" property
*/
if (np != pci_dev) {
- const u32 *reg = get_property(np, "reg", NULL);
+ const u32 *reg = of_get_property(np, "reg", NULL);
if (reg && (*reg < 4))
index = lindex = *reg;
}
* doesn't work for these settings, you'll have to add your own special
* cases here
*/
- if (device_is_compatible(pci_dev, "pci13a8,152") ||
- device_is_compatible(pci_dev, "pci13a8,154") ||
- device_is_compatible(pci_dev, "pci13a8,158")) {
+ if (of_device_is_compatible(pci_dev, "pci13a8,152") ||
+ of_device_is_compatible(pci_dev, "pci13a8,154") ||
+ of_device_is_compatible(pci_dev, "pci13a8,158")) {
addr += 0x200 * lindex;
base += 0x200 * lindex;
} else {
DBG(" -> find_legacy_serial_port()\n");
/* Now find out if one of these is out firmware console */
- path = get_property(of_chosen, "linux,stdout-path", NULL);
+ path = of_get_property(of_chosen, "linux,stdout-path", NULL);
if (path != NULL) {
stdout = of_find_node_by_path(path);
if (stdout)
of_node_put(tsi);
}
+ /* First fill our array with opb bus ports */
+ for (np = NULL; (np = of_find_compatible_node(np, "serial", "ns16750")) != NULL;) {
+ struct device_node *opb = of_get_parent(np);
+ if (opb && !strcmp(opb->type, "opb")) {
+ index = add_legacy_soc_port(np, np);
+ if (index >= 0 && np == stdout)
+ legacy_serial_console = index;
+ }
+ of_node_put(opb);
+ }
+
#ifdef CONFIG_PCI
/* Next, try to locate PCI ports */
for (np = NULL; (np = of_find_all_nodes(np));) {
/* Check for known pciclass, and also check wether we have
* a device with child nodes for ports or not
*/
- if (device_is_compatible(np, "pciclass,0700") ||
- device_is_compatible(np, "pciclass,070002"))
+ if (of_device_is_compatible(np, "pciclass,0700") ||
+ of_device_is_compatible(np, "pciclass,070002"))
pci = np;
- else if (device_is_compatible(parent, "pciclass,0700") ||
- device_is_compatible(parent, "pciclass,070002"))
+ else if (of_device_is_compatible(parent, "pciclass,0700") ||
+ of_device_is_compatible(parent, "pciclass,070002"))
pci = parent;
else {
of_node_put(parent);
}
/* We are getting a weird phandle from OF ... */
/* ... So use the full path instead */
- name = get_property(of_chosen, "linux,stdout-path", NULL);
+ name = of_get_property(of_chosen, "linux,stdout-path", NULL);
if (name == NULL) {
DBG(" no linux,stdout-path !\n");
return -ENODEV;
}
DBG("stdout is %s\n", prom_stdout->full_name);
- name = get_property(prom_stdout, "name", NULL);
+ name = of_get_property(prom_stdout, "name", NULL);
if (!name) {
DBG(" stdout package has no name !\n");
goto not_found;
}
- spd = get_property(prom_stdout, "current-speed", NULL);
+ spd = of_get_property(prom_stdout, "current-speed", NULL);
if (spd)
speed = *spd;