#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
+#include <asm/ptrace.h>
/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
#define LOAD_BAT(n, reg, RA, RB) \
mtspr SPRN_DBAT##n##L,RB; \
1:
- .text
+ .section .text.head, "ax"
.stabs "arch/powerpc/kernel/",N_SO,0,0,0f
.stabs "head_32.S",N_SO,0,0,0f
0:
- .globl _stext
-_stext:
+_ENTRY(_stext);
/*
* _start is defined this way because the XCOFF loader in the OpenFirmware
* on the powermac expects the entry point to be a procedure descriptor.
*/
- .text
- .globl _start
-_start:
+_ENTRY(_start);
/*
* These are here for legacy reasons, the kernel used to
* need to look like a coff function entry for the pmac
#if defined(CONFIG_BOOTX_TEXT)
bl setup_disp_bat
#endif
+#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
+ bl setup_cpm_bat
+#endif
/*
* Call setup_cpu for CPU 0 and initialize 6xx Idle
li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
MTMSRD(r10); /* (except for mach check in rtas) */ \
stw r0,GPR0(r11); \
- lis r10,0x7265; /* put exception frame marker */ \
- addi r10,r10,0x6773; \
+ lis r10,STACK_FRAME_REGS_MARKER@ha; /* exception frame marker */ \
+ addi r10,r10,STACK_FRAME_REGS_MARKER@l; \
stw r10,8(r11); \
SAVE_4GPRS(3, r11); \
SAVE_2GPRS(7, r11)
mfctr r0
/* Get PTE (linux-style) and check access */
mfspr r3,SPRN_IMISS
- lis r1,KERNELBASE@h /* check if kernel address */
- cmplw 0,r3,r1
+ lis r1,PAGE_OFFSET@h /* check if kernel address */
+ cmplw 0,r1,r3
mfspr r2,SPRN_SPRG3
li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
lwz r2,PGDIR(r2)
- blt+ 112f
+ bge- 112f
+ mfspr r2,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
+ rlwimi r1,r2,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
lis r2,swapper_pg_dir@ha /* if kernel address, use */
addi r2,r2,swapper_pg_dir@l /* kernel page table */
- mfspr r1,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
- rlwinm r1,r1,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
112: tophys(r2,r2)
rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
lwz r2,0(r2) /* get pmd entry */
mfctr r0
/* Get PTE (linux-style) and check access */
mfspr r3,SPRN_DMISS
- lis r1,KERNELBASE@h /* check if kernel address */
- cmplw 0,r3,r1
+ lis r1,PAGE_OFFSET@h /* check if kernel address */
+ cmplw 0,r1,r3
mfspr r2,SPRN_SPRG3
li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
lwz r2,PGDIR(r2)
- blt+ 112f
+ bge- 112f
+ mfspr r2,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
+ rlwimi r1,r2,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
lis r2,swapper_pg_dir@ha /* if kernel address, use */
addi r2,r2,swapper_pg_dir@l /* kernel page table */
- mfspr r1,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
- rlwinm r1,r1,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
112: tophys(r2,r2)
rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
lwz r2,0(r2) /* get pmd entry */
mfctr r0
/* Get PTE (linux-style) and check access */
mfspr r3,SPRN_DMISS
- lis r1,KERNELBASE@h /* check if kernel address */
- cmplw 0,r3,r1
+ lis r1,PAGE_OFFSET@h /* check if kernel address */
+ cmplw 0,r1,r3
mfspr r2,SPRN_SPRG3
li r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */
lwz r2,PGDIR(r2)
- blt+ 112f
+ bge- 112f
+ mfspr r2,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
+ rlwimi r1,r2,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
lis r2,swapper_pg_dir@ha /* if kernel address, use */
addi r2,r2,swapper_pg_dir@l /* kernel page table */
- mfspr r1,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
- rlwinm r1,r1,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
112: tophys(r2,r2)
rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
lwz r2,0(r2) /* get pmd entry */
/* we haven't used ctr or xer or lr */
b fast_exception_return
-/*
- * AltiVec unavailable trap from kernel - print a message, but let
- * the task use AltiVec in the kernel until it returns to user mode.
- */
-KernelAltiVec:
- lwz r3,_MSR(r1)
- oris r3,r3,MSR_VEC@h
- stw r3,_MSR(r1) /* enable use of AltiVec after return */
- lis r3,87f@h
- ori r3,r3,87f@l
- mr r4,r2 /* current */
- lwz r5,_NIP(r1)
- bl printk
- b ret_from_except
-87: .string "AltiVec used in kernel (task=%p, pc=%x) \n"
- .align 4,0
-
/*
* giveup_altivec(tsk)
* Disable AltiVec for the task given as the argument,
* r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset
* on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5.
*/
-_GLOBAL(copy_and_flush)
+_ENTRY(copy_and_flush)
addi r5,r5,-4
addi r6,r6,-4
4: li r0,L1_CACHE_BYTES/4
* included in CONFIG_6xx
*/
#if !defined(CONFIG_6xx)
-_GLOBAL(__save_cpu_setup)
+_ENTRY(__save_cpu_setup)
blr
-_GLOBAL(__restore_cpu_setup)
+_ENTRY(__restore_cpu_setup)
blr
#endif /* !defined(CONFIG_6xx) */
/*
* Set up the segment registers for a new context.
*/
-_GLOBAL(set_context)
+_ENTRY(set_context)
mulli r3,r3,897 /* multiply context by skew factor */
rlwinm r3,r3,4,8,27 /* VSID = (context & 0xfffff) << 4 */
addis r3,r3,0x6000 /* Set Ks, Ku bits */
blr
#endif /* CONFIG_BOOTX_TEXT */
+#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
+setup_cpm_bat:
+ lis r8, 0xf000
+ ori r8, r8, 0x002a
+ mtspr SPRN_DBAT1L, r8
+
+ lis r11, 0xf000
+ ori r11, r11, (BL_1M << 2) | 2
+ mtspr SPRN_DBAT1U, r11
+
+ blr
+#endif
+
#ifdef CONFIG_8260
/* Jump into the system reset for the rom.
* We first disable the MMU, and then jump to the ROM reset address.
.globl swapper_pg_dir
swapper_pg_dir:
- .space 4096
-
-/*
- * This space gets a copy of optional info passed to us by the bootstrap
- * Used to pass parameters into the kernel like root=/dev/sda1, etc.
- */
- .globl cmd_line
-cmd_line:
- .space 512
+ .space PGD_TABLE_SIZE
.globl intercept_table
intercept_table: