/*
* MPC8560 ADS Device Tree Source
*
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC8560ADS";
#address-cells = <1>;
#size-cells = <1>;
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8560@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
- timebase-frequency = <04ead9a0>;
- bus-frequency = <13ab6680>;
- clock-frequency = <312c8040>;
- 32-bit;
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
+ timebase-frequency = <82500000>;
+ bus-frequency = <330000000>;
+ clock-frequency = <825000000>;
};
};
memory {
device_type = "memory";
- reg = <00000000 10000000>;
+ reg = <0x0 0x10000000>;
};
soc8560@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
- #interrupt-cells = <2>;
device_type = "soc";
- ranges = <0 e0000000 00100000>;
- reg = <e0000000 00000200>;
- bus-frequency = <13ab6680>;
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x200>;
+ bus-frequency = <330000000>;
memory-controller@2000 {
compatible = "fsl,8540-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8540-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <40000>; // L2, 256K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2, 256K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
mdio@24520 {
- device_type = "mdio";
- compatible = "gianfar";
- reg = <24520 20>;
#address-cells = <1>;
#size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <0>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
- reg = <2>;
+ reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
- reg = <3>;
+ reg = <0x3>;
device_type = "ethernet-phy";
};
};
- ethernet@24000 {
+ enet0: ethernet@24000 {
+ cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <24000 1000>;
- /*
- * address is deprecated and will be removed
- * in 2.6.25. Only recent versions of
- * U-Boot support local-mac-address, however.
- */
- address = [ 00 00 00 00 00 00 ];
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
- ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
+ enet1: ethernet@25000 {
+ cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <25000 1000>;
- /*
- * address is deprecated and will be removed
- * in 2.6.25. Only recent versions of
- * U-Boot support local-mac-address, however.
- */
- address = [ 00 00 00 00 00 00 ];
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
- pci@8000 {
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
- device_type = "pci";
- reg = <8000 1000>;
- clock-frequency = <3f940aa>;
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
-
- /* IDSEL 0x2 */
- 1000 0 0 1 &mpic 1 1
- 1000 0 0 2 &mpic 2 1
- 1000 0 0 3 &mpic 3 1
- 1000 0 0 4 &mpic 4 1
-
- /* IDSEL 0x3 */
- 1800 0 0 1 &mpic 4 1
- 1800 0 0 2 &mpic 1 1
- 1800 0 0 3 &mpic 2 1
- 1800 0 0 4 &mpic 3 1
-
- /* IDSEL 0x4 */
- 2000 0 0 1 &mpic 3 1
- 2000 0 0 2 &mpic 4 1
- 2000 0 0 3 &mpic 1 1
- 2000 0 0 4 &mpic 2 1
-
- /* IDSEL 0x5 */
- 2800 0 0 1 &mpic 2 1
- 2800 0 0 2 &mpic 3 1
- 2800 0 0 3 &mpic 4 1
- 2800 0 0 4 &mpic 1 1
-
- /* IDSEL 12 */
- 6000 0 0 1 &mpic 1 1
- 6000 0 0 2 &mpic 2 1
- 6000 0 0 3 &mpic 3 1
- 6000 0 0 4 &mpic 4 1
-
- /* IDSEL 13 */
- 6800 0 0 1 &mpic 4 1
- 6800 0 0 2 &mpic 1 1
- 6800 0 0 3 &mpic 2 1
- 6800 0 0 4 &mpic 3 1
-
- /* IDSEL 14*/
- 7000 0 0 1 &mpic 3 1
- 7000 0 0 2 &mpic 4 1
- 7000 0 0 3 &mpic 1 1
- 7000 0 0 4 &mpic 2 1
-
- /* IDSEL 15 */
- 7800 0 0 1 &mpic 2 1
- 7800 0 0 2 &mpic 3 1
- 7800 0 0 3 &mpic 4 1
- 7800 0 0 4 &mpic 1 1
-
- /* IDSEL 18 */
- 9000 0 0 1 &mpic 1 1
- 9000 0 0 2 &mpic 2 1
- 9000 0 0 3 &mpic 3 1
- 9000 0 0 4 &mpic 4 1
-
- /* IDSEL 19 */
- 9800 0 0 1 &mpic 4 1
- 9800 0 0 2 &mpic 1 1
- 9800 0 0 3 &mpic 2 1
- 9800 0 0 4 &mpic 3 1
-
- /* IDSEL 20 */
- a000 0 0 1 &mpic 3 1
- a000 0 0 2 &mpic 4 1
- a000 0 0 3 &mpic 1 1
- a000 0 0 4 &mpic 2 1
-
- /* IDSEL 21 */
- a800 0 0 1 &mpic 2 1
- a800 0 0 2 &mpic 3 1
- a800 0 0 3 &mpic 4 1
- a800 0 0 4 &mpic 1 1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 01000000>;
- };
-
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
- built-in;
+ reg = <0x40000 0x40000>;
device_type = "open-pic";
};
- cpm@e0000000 {
+ cpm@919c0 {
#address-cells = <1>;
#size-cells = <1>;
- #interrupt-cells = <2>;
- device_type = "cpm";
- model = "CPM2";
- ranges = <0 0 c0000>;
- reg = <80000 40000>;
- command-proc = <919c0>;
- brg-frequency = <9d5b340>;
+ compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
+ reg = <0x919c0 0x30>;
+ ranges;
+
+ muram@80000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80000 0x10000>;
+
+ data@0 {
+ compatible = "fsl,cpm-muram-data";
+ reg = <0x0 0x4000 0x9000 0x2000>;
+ };
+ };
+
+ brg@919f0 {
+ compatible = "fsl,mpc8560-brg",
+ "fsl,cpm2-brg",
+ "fsl,cpm-brg";
+ reg = <0x919f0 0x10 0x915f0 0x10>;
+ clock-frequency = <165000000>;
+ };
cpmpic: pic@90c00 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <2e 2>;
+ interrupts = <46 2>;
interrupt-parent = <&mpic>;
- reg = <90c00 80>;
- built-in;
- device_type = "cpm-pic";
+ reg = <0x90c00 0x80>;
+ compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
};
- scc@91a00 {
+ serial0: serial@91a00 {
device_type = "serial";
- compatible = "cpm_uart";
- model = "SCC";
- device-id = <1>;
- reg = <91a00 20 88000 100>;
- clock-setup = <00ffffff 0>;
- rx-clock = <1>;
- tx-clock = <1>;
- current-speed = <1c200>;
- interrupts = <28 8>;
+ compatible = "fsl,mpc8560-scc-uart",
+ "fsl,cpm2-scc-uart";
+ reg = <0x91a00 0x20 0x88000 0x100>;
+ fsl,cpm-brg = <1>;
+ fsl,cpm-command = <0x800000>;
+ current-speed = <115200>;
+ interrupts = <40 8>;
interrupt-parent = <&cpmpic>;
};
- scc@91a20 {
+ serial1: serial@91a20 {
device_type = "serial";
- compatible = "cpm_uart";
- model = "SCC";
- device-id = <2>;
- reg = <91a20 20 88100 100>;
- clock-setup = <ff00ffff 90000>;
- rx-clock = <2>;
- tx-clock = <2>;
- current-speed = <1c200>;
- interrupts = <29 8>;
+ compatible = "fsl,mpc8560-scc-uart",
+ "fsl,cpm2-scc-uart";
+ reg = <0x91a20 0x20 0x88100 0x100>;
+ fsl,cpm-brg = <2>;
+ fsl,cpm-command = <0x4a00000>;
+ current-speed = <115200>;
+ interrupts = <41 8>;
interrupt-parent = <&cpmpic>;
};
- fcc@91320 {
+ enet2: ethernet@91320 {
device_type = "network";
- compatible = "fs_enet";
- model = "FCC";
- device-id = <2>;
- reg = <91320 20 88500 100 913a0 30>;
- /*
- * mac-address is deprecated and will be removed
- * in 2.6.25. Only recent versions of
- * U-Boot support local-mac-address, however.
- */
- mac-address = [ 00 00 00 00 00 00 ];
+ compatible = "fsl,mpc8560-fcc-enet",
+ "fsl,cpm2-fcc-enet";
+ reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>;
local-mac-address = [ 00 00 00 00 00 00 ];
- clock-setup = <ff00ffff 250000>;
- rx-clock = <15>;
- tx-clock = <16>;
- interrupts = <21 8>;
+ fsl,cpm-command = <0x16200300>;
+ interrupts = <33 8>;
interrupt-parent = <&cpmpic>;
phy-handle = <&phy2>;
};
- fcc@91340 {
+ enet3: ethernet@91340 {
device_type = "network";
- compatible = "fs_enet";
- model = "FCC";
- device-id = <3>;
- reg = <91340 20 88600 100 913d0 30>;
- /*
- * mac-address is deprecated and will be removed
- * in 2.6.25. Only recent versions of
- * U-Boot support local-mac-address, however.
- */
- mac-address = [ 00 00 00 00 00 00 ];
+ compatible = "fsl,mpc8560-fcc-enet",
+ "fsl,cpm2-fcc-enet";
+ reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
local-mac-address = [ 00 00 00 00 00 00 ];
- clock-setup = <ffff00ff 3700>;
- rx-clock = <17>;
- tx-clock = <18>;
- interrupts = <22 8>;
+ fsl,cpm-command = <0x1a400300>;
+ interrupts = <34 8>;
interrupt-parent = <&cpmpic>;
phy-handle = <&phy3>;
};
};
};
+
+ pci0: pci@e0008000 {
+ cell-index = <0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+ device_type = "pci";
+ reg = <0xe0008000 0x1000>;
+ clock-frequency = <66666666>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+
+ /* IDSEL 0x2 */
+ 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1
+
+ /* IDSEL 0x3 */
+ 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1
+
+ /* IDSEL 0x4 */
+ 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1
+
+ /* IDSEL 0x5 */
+ 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 12 */
+ 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1
+
+ /* IDSEL 13 */
+ 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1
+
+ /* IDSEL 14*/
+ 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1
+
+ /* IDSEL 15 */
+ 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 18 */
+ 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
+
+ /* IDSEL 19 */
+ 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1
+
+ /* IDSEL 20 */
+ 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1
+
+ /* IDSEL 21 */
+ 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <24 2>;
+ bus-range = <0 0>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe2000000 0x0 0x1000000>;
+ };
};
projects / linux-2.6 / blobdiff