/*
* MPC8272 ADS Device Tree Source
*
- * Copyright 2005 Freescale Semiconductor Inc.
+ * Copyright 2005,2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* option) any later version.
*/
+/dts-v1/;
+
/ {
- model = "MPC8272ADS";
- compatible = "MPC8260ADS";
- #address-cells = <1>;
- #size-cells = <1>;
- linux,phandle = <100>;
-
- cpus {
- #cpus = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- linux,phandle = <200>;
-
- PowerPC,8272@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <4000>; // L1, 16K
- i-cache-size = <4000>; // L1, 16K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- 32-bit;
- linux,phandle = <201>;
- };
- };
-
- interrupt-controller@f8200000 {
- linux,phandle = <f8200000>;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- interrupt-controller;
- reg = <f8200000 f8200004>;
- built-in;
- device_type = "pci-pic";
- };
- memory {
- device_type = "memory";
- linux,phandle = <300>;
- reg = <00000000 4000000 f4500000 00000020>;
- };
-
- chosen {
- name = "chosen";
- linux,platform = <0>;
- interrupt-controller = <10c00>;
- linux,phandle = <400>;
- };
-
- soc8272@f0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- #interrupt-cells = <2>;
- device_type = "soc";
- ranges = <00000000 f0000000 00053000>;
- reg = <f0000000 10000>;
-
- mdio@0 {
- device_type = "mdio";
- compatible = "fs_enet";
- reg = <0 0>;
- linux,phandle = <24520>;
- #address-cells = <1>;
- #size-cells = <0>;
- ethernet-phy@0 {
- linux,phandle = <2452000>;
- interrupt-parent = <10c00>;
- interrupts = <17 4>;
- reg = <0>;
- bitbang = [ 12 12 13 02 02 01 ];
- device_type = "ethernet-phy";
- };
- ethernet-phy@1 {
- linux,phandle = <2452001>;
- interrupt-parent = <10c00>;
- interrupts = <17 4>;
- bitbang = [ 12 12 13 02 02 01 ];
- reg = <3>;
- device_type = "ethernet-phy";
- };
- };
-
- ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- device_type = "network";
- device-id = <1>;
- compatible = "fs_enet";
- model = "FCC";
- reg = <11300 20 8400 100 11380 30>;
- mac-address = [ 00 11 2F 99 43 54 ];
- interrupts = <20 2>;
- interrupt-parent = <10c00>;
- phy-handle = <2452000>;
- rx-clock = <13>;
- tx-clock = <12>;
- };
-
- ethernet@25000 {
- device_type = "network";
- device-id = <2>;
- compatible = "fs_enet";
- model = "FCC";
- reg = <11320 20 8500 100 113b0 30>;
- mac-address = [ 00 11 2F 99 44 54 ];
- interrupts = <21 2>;
- interrupt-parent = <10c00>;
- phy-handle = <2452001>;
- rx-clock = <17>;
- tx-clock = <18>;
- };
-
- cpm@f0000000 {
- linux,phandle = <f0000000>;
- #address-cells = <1>;
- #size-cells = <1>;
- #interrupt-cells = <2>;
- device_type = "cpm";
- model = "CPM2";
- ranges = <00000000 00000000 20000>;
- reg = <0 20000>;
- command-proc = <119c0>;
- brg-frequency = <17D7840>;
- cpm_clk = <BEBC200>;
-
- scc@11a00 {
- device_type = "serial";
- compatible = "cpm_uart";
- model = "SCC";
- device-id = <1>;
- reg = <11a00 20 8000 100>;
- current-speed = <1c200>;
- interrupts = <28 2>;
- interrupt-parent = <10c00>;
- clock-setup = <0 00ffffff>;
- rx-clock = <1>;
- tx-clock = <1>;
- };
-
- scc@11a60 {
- device_type = "serial";
- compatible = "cpm_uart";
- model = "SCC";
- device-id = <4>;
- reg = <11a60 20 8300 100>;
- current-speed = <1c200>;
- interrupts = <2b 2>;
- interrupt-parent = <10c00>;
- clock-setup = <1b ffffff00>;
- rx-clock = <4>;
- tx-clock = <4>;
- };
-
- };
- interrupt-controller@10c00 {
- linux,phandle = <10c00>;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- interrupt-controller;
- reg = <10c00 80>;
- built-in;
- device_type = "cpm-pic";
- compatible = "CPM2";
- };
- pci@0500 {
- linux,phandle = <0500>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- compatible = "8272";
- device_type = "pci";
- reg = <10430 4dc>;
- clock-frequency = <3f940aa>;
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
-
- /* IDSEL 0x16 */
- b000 0 0 1 f8200000 40 8
- b000 0 0 2 f8200000 41 8
- b000 0 0 3 f8200000 42 8
- b000 0 0 4 f8200000 43 8
-
- /* IDSEL 0x17 */
- b800 0 0 1 f8200000 43 8
- b800 0 0 2 f8200000 40 8
- b800 0 0 3 f8200000 41 8
- b800 0 0 4 f8200000 42 8
-
- /* IDSEL 0x18 */
- c000 0 0 1 f8200000 42 8
- c000 0 0 2 f8200000 43 8
- c000 0 0 3 f8200000 40 8
- c000 0 0 4 f8200000 41 8>;
- interrupt-parent = <10c00>;
- interrupts = <14 8>;
- bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 40000000
- 01000000 0 00000000 f6000000 0 02000000>;
- };
+ model = "MPC8272ADS";
+ compatible = "fsl,mpc8272ads";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8272@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <16384>;
+ i-cache-size = <16384>;
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
+ localbus@f0010100 {
+ compatible = "fsl,mpc8272-localbus",
+ "fsl,pq2-localbus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0xf0010100 0x40>;
+
+ ranges = <0x0 0x0 0xfe000000 0x2000000
+ 0x1 0x0 0xf4500000 0x8000
+ 0x3 0x0 0xf8200000 0x8000>;
+
+ flash@0,0 {
+ compatible = "jedec-flash";
+ reg = <0x0 0x0 0x2000000>;
+ bank-width = <4>;
+ device-width = <1>;
+ };
+
+ board-control@1,0 {
+ reg = <0x1 0x0 0x20>;
+ compatible = "fsl,mpc8272ads-bcsr";
+ };
+
+ PCI_PIC: interrupt-controller@3,0 {
+ compatible = "fsl,mpc8272ads-pci-pic",
+ "fsl,pq2ads-pci-pic";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ reg = <0x3 0x0 0x8>;
+ interrupt-parent = <&PIC>;
+ interrupts = <20 8>;
+ };
+ };
+
+
+ pci@f0010800 {
+ device_type = "pci";
+ reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
+ compatible = "fsl,mpc8272-pci", "fsl,pq2-pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ clock-frequency = <66666666>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x16 */
+ 0xb000 0x0 0x0 0x1 &PCI_PIC 0
+ 0xb000 0x0 0x0 0x2 &PCI_PIC 1
+ 0xb000 0x0 0x0 0x3 &PCI_PIC 2
+ 0xb000 0x0 0x0 0x4 &PCI_PIC 3
+
+ /* IDSEL 0x17 */
+ 0xb800 0x0 0x0 0x1 &PCI_PIC 4
+ 0xb800 0x0 0x0 0x2 &PCI_PIC 5
+ 0xb800 0x0 0x0 0x3 &PCI_PIC 6
+ 0xb800 0x0 0x0 0x4 &PCI_PIC 7
+
+ /* IDSEL 0x18 */
+ 0xc000 0x0 0x0 0x1 &PCI_PIC 8
+ 0xc000 0x0 0x0 0x2 &PCI_PIC 9
+ 0xc000 0x0 0x0 0x3 &PCI_PIC 10
+ 0xc000 0x0 0x0 0x4 &PCI_PIC 11>;
+
+ interrupt-parent = <&PIC>;
+ interrupts = <18 8>;
+ ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>;
+ };
+
+ soc@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8272", "fsl,pq2-soc";
+ ranges = <0x0 0xf0000000 0x53000>;
+
+ // Temporary -- will go away once kernel uses ranges for get_immrbase().
+ reg = <0xf0000000 0x53000>;
+
+ cpm@119c0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8272-cpm", "fsl,cpm2";
+ reg = <0x119c0 0x30>;
+ ranges;
+
+ muram@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x10000>;
+
+ data@0 {
+ compatible = "fsl,cpm-muram-data";
+ reg = <0x0 0x2000 0x9800 0x800>;
+ };
+ };
+
+ brg@119f0 {
+ compatible = "fsl,mpc8272-brg",
+ "fsl,cpm2-brg",
+ "fsl,cpm-brg";
+ reg = <0x119f0 0x10 0x115f0 0x10>;
+ };
+
+ serial@11a00 {
+ device_type = "serial";
+ compatible = "fsl,mpc8272-scc-uart",
+ "fsl,cpm2-scc-uart";
+ reg = <0x11a00 0x20 0x8000 0x100>;
+ interrupts = <40 8>;
+ interrupt-parent = <&PIC>;
+ fsl,cpm-brg = <1>;
+ fsl,cpm-command = <0x800000>;
+ };
+
+ serial@11a60 {
+ device_type = "serial";
+ compatible = "fsl,mpc8272-scc-uart",
+ "fsl,cpm2-scc-uart";
+ reg = <0x11a60 0x20 0x8300 0x100>;
+ interrupts = <43 8>;
+ interrupt-parent = <&PIC>;
+ fsl,cpm-brg = <4>;
+ fsl,cpm-command = <0xce00000>;
+ };
+
+ mdio@10d40 {
+ device_type = "mdio";
+ compatible = "fsl,mpc8272ads-mdio-bitbang",
+ "fsl,mpc8272-mdio-bitbang",
+ "fsl,cpm2-mdio-bitbang";
+ reg = <0x10d40 0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fsl,mdio-pin = <18>;
+ fsl,mdc-pin = <19>;
+
+ PHY0: ethernet-phy@0 {
+ interrupt-parent = <&PIC>;
+ interrupts = <23 8>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+
+ PHY1: ethernet-phy@1 {
+ interrupt-parent = <&PIC>;
+ interrupts = <23 8>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@11300 {
+ device_type = "network";
+ compatible = "fsl,mpc8272-fcc-enet",
+ "fsl,cpm2-fcc-enet";
+ reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <32 8>;
+ interrupt-parent = <&PIC>;
+ phy-handle = <&PHY0>;
+ linux,network-index = <0>;
+ fsl,cpm-command = <0x12000300>;
+ };
+
+ ethernet@11320 {
+ device_type = "network";
+ compatible = "fsl,mpc8272-fcc-enet",
+ "fsl,cpm2-fcc-enet";
+ reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <33 8>;
+ interrupt-parent = <&PIC>;
+ phy-handle = <&PHY1>;
+ linux,network-index = <1>;
+ fsl,cpm-command = <0x16200300>;
+ };
+ };
+
+ PIC: interrupt-controller@10c00 {
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0x10c00 0x80>;
+ compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic";
+ };
/* May need to remove if on a part without crypto engine */
- crypto@30000 {
- device_type = "crypto";
- model = "SEC2";
- compatible = "talitos";
- reg = <30000 10000>;
- interrupts = <b 2>;
- interrupt-parent = <10c00>;
- num-channels = <4>;
- channel-fifo-len = <18>;
- exec-units-mask = <0000007e>;
+ crypto@30000 {
+ device_type = "crypto";
+ model = "SEC2";
+ compatible = "fsl,mpc8272-talitos-sec2",
+ "fsl,talitos-sec2",
+ "fsl,talitos",
+ "talitos";
+ reg = <0x30000 0x10000>;
+ interrupts = <11 8>;
+ interrupt-parent = <&PIC>;
+ num-channels = <4>;
+ channel-fifo-len = <24>;
+ exec-units-mask = <0x7e>;
/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
- descriptor-types-mask = <01010ebf>;
- };
+ descriptor-types-mask = <0x1010ebf>;
+ };
+ };
- };
+ chosen {
+ linux,stdout-path = "/soc/cpm/serial@11a00";
+ };
};