#include <asm/unistd.h>
#include <asm/thread_info.h>
-#ifdef CONFIG_64BIT
-#define CMPIB cmpib,*
-#define CMPB cmpb,*
-#define COND(x) *x
+#include <linux/linkage.h>
+#ifdef CONFIG_64BIT
.level 2.0w
#else
-#define CMPIB cmpib,
-#define CMPB cmpb,
-#define COND(x) x
-
.level 2.0
#endif
* The "get_stack" macros are responsible for determining the
* kernel stack value.
*
- * For Faults:
* If sr7 == 0
* Already using a kernel stack, so call the
* get_stack_use_r30 macro to push a pt_regs structure
* task pointer pointed to by cr30. Set the stack
* pointer to point to the end of the task structure.
*
- * For Interrupts:
- * If sr7 == 0
- * Already using a kernel stack, check to see if r30
- * is already pointing to the per processor interrupt
- * stack. If it is, call the get_stack_use_r30 macro
- * to push a pt_regs structure on the stack, and store
- * registers there. Otherwise, call get_stack_use_cr31
- * to get a pointer to the base of the interrupt stack
- * and push a pt_regs structure on that stack.
- * else
- * Need to set up a kernel stack, so call the
- * get_stack_use_cr30 macro to set up a pointer
- * to the pt_regs structure contained within the
- * task pointer pointed to by cr30. Set the stack
- * pointer to point to the end of the task structure.
- * N.B: We don't use the interrupt stack for the
- * first interrupt from userland, because signals/
- * resched's are processed when returning to userland,
- * and we can sleep in those cases.
- *
* Note that we use shadowed registers for temps until
* we can save %r26 and %r29. %r26 is used to preserve
* %r8 (a shadowed register) which temporarily contained
* the static part of the kernel address space.
*/
- .export fault_vector_20
-
.text
- .align 4096
+ .align PAGE_SIZE
-fault_vector_20:
+ENTRY(fault_vector_20)
/* First vector is invalid (0) */
.ascii "cows can fly"
.byte 0
def 29
def 30
def 31
+END(fault_vector_20)
#ifndef CONFIG_64BIT
- .export fault_vector_11
-
.align 2048
-fault_vector_11:
+ENTRY(fault_vector_11)
/* First vector is invalid (0) */
.ascii "cows can fly"
.byte 0
def 29
def 30
def 31
+END(fault_vector_11)
#endif
#define CLONE_VM 0x100 /* Must agree with <linux/sched.h> */
#define CLONE_UNTRACED 0x00800000
- .export __kernel_thread, code
.import do_fork
-__kernel_thread:
+ENTRY(__kernel_thread)
STREG %r2, -RP_OFFSET(%r30)
copy %r30, %r1
ldo -PT_SZ_ALGN(%r30), %r30
bv %r0(%r2)
nop
+ENDPROC(__kernel_thread)
/*
* Child Returns here
* into task save area.
*/
- .export ret_from_kernel_thread
-ret_from_kernel_thread:
+ENTRY(ret_from_kernel_thread)
/* Call schedule_tail first though */
BL schedule_tail, %r2
bv %r0(%r1)
#endif
ldi 0, %r26
+ENDPROC(ret_from_kernel_thread)
.import sys_execve, code
- .export __execve, code
-__execve:
+ENTRY(__execve)
copy %r2, %r15
copy %r30, %r16
ldo PT_SZ_ALGN(%r30), %r30
copy %r16, %r30
bv %r0(%r2)
nop
+ENDPROC(__execve)
- .align 4
/*
* struct task_struct *_switch_to(struct task_struct *prev,
* struct task_struct *next)
*
* switch kernel stacks and return prev */
- .export _switch_to, code
-_switch_to:
+ENTRY(_switch_to)
STREG %r2, -RP_OFFSET(%r30)
callee_save_float
LDREG -RP_OFFSET(%r30), %r2
bv %r0(%r2)
copy %r26, %r28
+ENDPROC(_switch_to)
/*
* Common rfi return path for interruptions, kernel execve, and
*
*/
- .align 4096
+ .align PAGE_SIZE
- .export syscall_exit_rfi
-syscall_exit_rfi:
+ENTRY(syscall_exit_rfi)
mfctl %cr30,%r16
LDREG TI_TASK(%r16), %r16 /* thread_info -> task_struct */
ldo TASK_REGS(%r16),%r16
/* NOTE: Need to enable interrupts incase we schedule. */
ssm PSW_SM_I, %r0
- /* Check for software interrupts */
-
- .import irq_stat,data
-
- load32 irq_stat,%r19
-#ifdef CONFIG_SMP
- mfctl %cr30,%r1
- ldw TI_CPU(%r1),%r1 /* get cpu # - int */
- /* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) amount
- ** irq_stat[] is defined using ____cacheline_aligned.
- */
- SHLREG %r1,L1_CACHE_SHIFT,%r20
- add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */
-#endif /* CONFIG_SMP */
-
intr_check_resched:
/* check for reschedule */
* Only do signals if we are returning to user space
*/
LDREG PT_IASQ0(%r16), %r20
- CMPIB=,n 0,%r20,intr_restore /* backward */
+ cmpib,COND(=),n 0,%r20,intr_restore /* backward */
LDREG PT_IASQ1(%r16), %r20
- CMPIB=,n 0,%r20,intr_restore /* backward */
+ cmpib,COND(=),n 0,%r20,intr_restore /* backward */
copy %r0, %r25 /* long in_syscall = 0 */
#ifdef CONFIG_64BIT
* we jump back to intr_restore.
*/
LDREG PT_IASQ0(%r16), %r20
- CMPIB= 0, %r20, intr_do_preempt
+ cmpib,COND(=) 0, %r20, intr_do_preempt
nop
LDREG PT_IASQ1(%r16), %r20
- CMPIB= 0, %r20, intr_do_preempt
+ cmpib,COND(=) 0, %r20, intr_do_preempt
nop
#ifdef CONFIG_64BIT
/* current_thread_info()->preempt_count */
mfctl %cr30, %r1
LDREG TI_PRE_COUNT(%r1), %r19
- CMPIB<> 0, %r19, intr_restore /* if preempt_count > 0 */
+ cmpib,COND(<>) 0, %r19, intr_restore /* if preempt_count > 0 */
nop /* prev insn branched backwards */
/* check if we interrupted a critical path */
*/
intr_extint:
- CMPIB=,n 0,%r16,1f
+ cmpib,COND(=),n 0,%r16,1f
+
get_stack_use_cr30
- b,n 3f
+ b,n 2f
1:
-#if 0 /* Interrupt Stack support not working yet! */
- mfctl %cr31,%r1
- copy %r30,%r17
- /* FIXME! depi below has hardcoded idea of interrupt stack size (32k)*/
- DEPI 0,31,15,%r17
- CMPB=,n %r1,%r17,2f
- get_stack_use_cr31
- b,n 3f
-#endif
-2:
get_stack_use_r30
-
-3:
+2:
save_specials %r29
virt_map
save_general %r29
b do_cpu_irq_mask
ldo R%intr_return(%r2), %r2 /* return to intr_return, not here */
+ENDPROC(syscall_exit_rfi)
/* Generic interruptions (illegal insn, unaligned, page fault, etc) */
- .export intr_save, code /* for os_hpmc */
-
-intr_save:
+ENTRY(intr_save) /* for os_hpmc */
mfsp %sr7,%r16
- CMPIB=,n 0,%r16,1f
+ cmpib,COND(=),n 0,%r16,1f
get_stack_use_cr30
b 2f
copy %r8,%r26
* adjust isr/ior below.
*/
- CMPIB=,n 6,%r26,skip_save_ior
+ cmpib,COND(=),n 6,%r26,skip_save_ior
mfctl %cr20, %r16 /* isr */
b handle_interruption
ldo R%intr_check_sig(%r2), %r2
+ENDPROC(intr_save)
/*
bb,>=,n %r9,26,nadtlb_nullify /* m bit not set, just nullify */
BL get_register,%r25
extrw,u %r9,15,5,%r8 /* Get index register # */
- CMPIB=,n -1,%r1,nadtlb_fault /* have to use slow path */
+ cmpib,COND(=),n -1,%r1,nadtlb_fault /* have to use slow path */
copy %r1,%r24
BL get_register,%r25
extrw,u %r9,10,5,%r8 /* Get base register # */
- CMPIB=,n -1,%r1,nadtlb_fault /* have to use slow path */
+ cmpib,COND(=),n -1,%r1,nadtlb_fault /* have to use slow path */
BL set_register,%r25
add,l %r1,%r24,%r1 /* doesn't affect c/b bits */
cmpb,<>,n %r16,%r17,nadtlb_fault /* Must be probe,[rw]*/
BL get_register,%r25 /* Find the target register */
extrw,u %r9,31,5,%r8 /* Get target register */
- CMPIB=,n -1,%r1,nadtlb_fault /* have to use slow path */
+ cmpib,COND(=),n -1,%r1,nadtlb_fault /* have to use slow path */
BL set_register,%r25
copy %r0,%r1 /* Write zero to target register */
b nadtlb_nullify /* Nullify return insn */
L3_ptep ptp,pte,t0,va,dbit_fault
#ifdef CONFIG_SMP
- CMPIB=,n 0,spc,dbit_nolock_20w
+ cmpib,COND(=),n 0,spc,dbit_nolock_20w
load32 PA(pa_dbit_lock),t0
dbit_spin_20w:
LDCW 0(t0),t1
- cmpib,= 0,t1,dbit_spin_20w
+ cmpib,COND(=) 0,t1,dbit_spin_20w
nop
dbit_nolock_20w:
idtlbt pte,prot
#ifdef CONFIG_SMP
- CMPIB=,n 0,spc,dbit_nounlock_20w
+ cmpib,COND(=),n 0,spc,dbit_nounlock_20w
ldi 1,t1
stw t1,0(t0)
L2_ptep ptp,pte,t0,va,dbit_fault
#ifdef CONFIG_SMP
- CMPIB=,n 0,spc,dbit_nolock_11
+ cmpib,COND(=),n 0,spc,dbit_nolock_11
load32 PA(pa_dbit_lock),t0
dbit_spin_11:
mtsp t1, %sr1 /* Restore sr1 */
#ifdef CONFIG_SMP
- CMPIB=,n 0,spc,dbit_nounlock_11
+ cmpib,COND(=),n 0,spc,dbit_nounlock_11
ldi 1,t1
stw t1,0(t0)
L2_ptep ptp,pte,t0,va,dbit_fault
#ifdef CONFIG_SMP
- CMPIB=,n 0,spc,dbit_nolock_20
+ cmpib,COND(=),n 0,spc,dbit_nolock_20
load32 PA(pa_dbit_lock),t0
dbit_spin_20:
idtlbt pte,prot
#ifdef CONFIG_SMP
- CMPIB=,n 0,spc,dbit_nounlock_20
+ cmpib,COND(=),n 0,spc,dbit_nounlock_20
ldi 1,t1
stw t1,0(t0)
LDREG PT_GR18(\regs),%r18
.endm
- .export sys_fork_wrapper
- .export child_return
-sys_fork_wrapper:
+ENTRY(sys_fork_wrapper)
LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30), %r1
ldo TASK_REGS(%r1),%r1
reg_save %r1
ldi __NR_fork,%r20
bv %r0(%r2)
STREG %r20,PT_GR20(%r1)
+ENDPROC(sys_fork_wrapper)
/* Set the return value for the child */
-child_return:
+ENTRY(child_return)
BL schedule_tail, %r2
nop
LDREG TASK_PT_GR19(%r1),%r2
b wrapper_exit
copy %r0,%r28
+ENDPROC(child_return)
-
- .export sys_clone_wrapper
-sys_clone_wrapper:
+
+ENTRY(sys_clone_wrapper)
LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1
ldo TASK_REGS(%r1),%r1 /* get pt regs */
reg_save %r1
b wrapper_exit
LDREG -RP_OFFSET-FRAME_SIZE(%r30),%r2
+ENDPROC(sys_clone_wrapper)
- .export sys_vfork_wrapper
-sys_vfork_wrapper:
+
+ENTRY(sys_vfork_wrapper)
LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1
ldo TASK_REGS(%r1),%r1 /* get pt regs */
reg_save %r1
b wrapper_exit
LDREG -RP_OFFSET-FRAME_SIZE(%r30),%r2
+ENDPROC(sys_vfork_wrapper)
.macro execve_wrapper execve
nop
.endm
- .export sys_execve_wrapper
.import sys_execve
-
-sys_execve_wrapper:
+ENTRY(sys_execve_wrapper)
execve_wrapper sys_execve
+ENDPROC(sys_execve_wrapper)
#ifdef CONFIG_64BIT
- .export sys32_execve_wrapper
.import sys32_execve
-
-sys32_execve_wrapper:
+ENTRY(sys32_execve_wrapper)
execve_wrapper sys32_execve
+ENDPROC(sys32_execve_wrapper)
#endif
- .export sys_rt_sigreturn_wrapper
-sys_rt_sigreturn_wrapper:
+ENTRY(sys_rt_sigreturn_wrapper)
LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r26
ldo TASK_REGS(%r26),%r26 /* get pt regs */
/* Don't save regs, we are going to restore them from sigcontext. */
*/
bv %r0(%r2)
LDREG PT_GR28(%r1),%r28 /* reload original r28 for syscall_exit */
+ENDPROC(sys_rt_sigreturn_wrapper)
- .export sys_sigaltstack_wrapper
-sys_sigaltstack_wrapper:
+ENTRY(sys_sigaltstack_wrapper)
/* Get the user stack pointer */
LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1
ldo TASK_REGS(%r1),%r24 /* get pt regs */
LDREG -RP_OFFSET(%r30), %r2
bv %r0(%r2)
nop
+ENDPROC(sys_sigaltstack_wrapper)
#ifdef CONFIG_64BIT
- .export sys32_sigaltstack_wrapper
-sys32_sigaltstack_wrapper:
+ENTRY(sys32_sigaltstack_wrapper)
/* Get the user stack pointer */
LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r24
LDREG TASK_PT_GR30(%r24),%r24
LDREG -RP_OFFSET(%r30), %r2
bv %r0(%r2)
nop
+ENDPROC(sys32_sigaltstack_wrapper)
#endif
- .export syscall_exit
-syscall_exit:
-
+ENTRY(syscall_exit)
/* NOTE: HP-UX syscalls also come through here
* after hpux_syscall_exit fixes up return
* values. */
STREG %r28,TASK_PT_GR28(%r1)
#ifdef CONFIG_HPUX
-
/* <linux/personality.h> cannot be easily included */
#define PER_HPUX 0x10
- LDREG TASK_PERSONALITY(%r1),%r19
+ ldw TASK_PERSONALITY(%r1),%r19
/* We can't use "CMPIB<> PER_HPUX" since "im5" field is sign extended */
ldo -PER_HPUX(%r19), %r19
- CMPIB<>,n 0,%r19,1f
+ cmpib,COND(<>),n 0,%r19,1f
/* Save other hpux returns if personality is PER_HPUX */
STREG %r22,TASK_PT_GR22(%r1)
*/
loadgp
-syscall_check_bh:
-
- /* Check for software interrupts */
-
- .import irq_stat,data
-
- load32 irq_stat,%r19
-
-#ifdef CONFIG_SMP
- /* sched.h: int processor */
- /* %r26 is used as scratch register to index into irq_stat[] */
- ldw TI_CPU-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r26 /* cpu # */
-
- /* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) bits */
- SHLREG %r26,L1_CACHE_SHIFT,%r20
- add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */
-#endif /* CONFIG_SMP */
-
syscall_check_resched:
/* check for reschedule */
/* Are we being ptraced? */
LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1
- LDREG TASK_PTRACE(%r1), %r19
+ ldw TASK_PTRACE(%r1), %r19
bb,< %r19,31,syscall_restore_rfi
nop
#else
nop
#endif
- b syscall_check_bh /* if resched, we start over again */
+ b syscall_check_resched /* if resched, we start over again */
nop
+ENDPROC(syscall_exit)
+
+get_register:
/*
* get_register is used by the non access tlb miss handlers to
* copy the value of the general register specified in r8 into
* a -1 in it, but that is OK, it just means that we will have
* to use the slow path instead).
*/
-
-get_register:
blr %r8,%r0
nop
bv %r0(%r25) /* r0 */
bv %r0(%r25) /* r31 */
copy %r31,%r1
+
+set_register:
/*
* set_register is used by the non access tlb miss handlers to
* copy the value of r1 into the general register specified in
* r8.
*/
-
-set_register:
blr %r8,%r0
nop
bv %r0(%r25) /* r0 (silly, but it is a place holder) */
copy %r1,%r30
bv %r0(%r25) /* r31 */
copy %r1,%r31
+
projects / linux-2.6 / blobdiff