* - Interrupt handling fixes
* Copyright (C) 2001, 2003 Ladislav Michl (ladis@linux-mips.org)
*/
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
/* #define DEBUG_SGINT */
/* So far nothing hangs here */
-#undef USE_LIO3_IRQ
+#undef USE_LIO3_IRQ
struct sgint_regs *sgint;
static char lc2msk_to_irqnr[256];
static char lc3msk_to_irqnr[256];
-extern asmlinkage void indyIRQ(void);
extern int ip22_eisa_init(void);
static void enable_local0_irq(unsigned int irq)
.end = end_local3_irq,
};
-void indy_local0_irqdispatch(struct pt_regs *regs)
+static void indy_local0_irqdispatch(struct pt_regs *regs)
{
u8 mask = sgint->istat0 & sgint->imask0;
u8 mask2;
return;
}
-void indy_local1_irqdispatch(struct pt_regs *regs)
+static void indy_local1_irqdispatch(struct pt_regs *regs)
{
u8 mask = sgint->istat1 & sgint->imask1;
u8 mask2;
extern void ip22_be_interrupt(int irq, struct pt_regs *regs);
-void indy_buserror_irq(struct pt_regs *regs)
+static void indy_buserror_irq(struct pt_regs *regs)
{
int irq = SGI_BUSERR_IRQ;
irq_exit();
}
-static struct irqaction local0_cascade = {
+static struct irqaction local0_cascade = {
.handler = no_action,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "local0 cascade",
};
-static struct irqaction local1_cascade = {
+static struct irqaction local1_cascade = {
.handler = no_action,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "local1 cascade",
};
-static struct irqaction buserr = {
+static struct irqaction buserr = {
.handler = no_action,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "Bus Error",
};
-static struct irqaction map0_cascade = {
+static struct irqaction map0_cascade = {
.handler = no_action,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "mapable0 cascade",
};
#ifdef USE_LIO3_IRQ
-static struct irqaction map1_cascade = {
+static struct irqaction map1_cascade = {
.handler = no_action,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "mapable1 cascade",
};
#define SGI_INTERRUPTS SGINT_END
#define SGI_INTERRUPTS SGINT_LOCAL3
#endif
+extern void indy_r4k_timer_interrupt(struct pt_regs *regs);
+extern void indy_8254timer_irq(struct pt_regs *regs);
+
+/*
+ * IRQs on the INDY look basically (barring software IRQs which we don't use
+ * at all) like:
+ *
+ * MIPS IRQ Source
+ * -------- ------
+ * 0 Software (ignored)
+ * 1 Software (ignored)
+ * 2 Local IRQ level zero
+ * 3 Local IRQ level one
+ * 4 8254 Timer zero
+ * 5 8254 Timer one
+ * 6 Bus Error
+ * 7 R4k timer (what we use)
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ---- R4k Timer
+ * Local IRQ zero
+ * Local IRQ one
+ * Bus Error
+ * 8254 Timer zero
+ * Lowest ---- 8254 Timer one
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+ unsigned int pending = read_c0_cause();
+
+ /*
+ * First we check for r4k counter/timer IRQ.
+ */
+ if (pending & CAUSEF_IP7)
+ indy_r4k_timer_interrupt(regs);
+ else if (pending & CAUSEF_IP2)
+ indy_local0_irqdispatch(regs);
+ else if (pending & CAUSEF_IP3)
+ indy_local1_irqdispatch(regs);
+ else if (pending & CAUSEF_IP6)
+ indy_buserror_irq(regs);
+ else if (pending & (CAUSEF_IP4 | CAUSEF_IP5))
+ indy_8254timer_irq(regs);
+}
+
extern void mips_cpu_irq_init(unsigned int irq_base);
void __init arch_init_irq(void)
sgint->cmeimask0 = 0;
sgint->cmeimask1 = 0;
- set_except_vector(0, indyIRQ);
-
/* init CPU irqs */
mips_cpu_irq_init(SGINT_CPU);
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = 0;
irq_desc[i].depth = 1;
- irq_desc[i].handler = handler;
+ irq_desc[i].chip = handler;
}
/* vector handler. this register the IRQ as non-sharable */