vmlinux-64 = vmlinux
cflags-y += -mabi=64
-ifdef CONFIG_BUILD_ELF64
-cflags-y += $(call cc-option,-mno-explicit-relocs)
-else
-cflags-y += $(call cc-option,-msym32)
-endif
endif
+all-$(CONFIG_BOOT_ELF32) := $(vmlinux-32)
+all-$(CONFIG_BOOT_ELF64) := $(vmlinux-64)
#
# GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel
#
# Firmware support
#
-libs-$(CONFIG_ARC) += arch/mips/arc/
+libs-$(CONFIG_ARC) += arch/mips/fw/arc/
+libs-$(CONFIG_CFE) += arch/mips/fw/cfe/
libs-$(CONFIG_SIBYTE_CFE) += arch/mips/sibyte/cfe/
#
cflags-$(CONFIG_MIPS_ATLAS) += -Iinclude/asm-mips/mach-atlas
cflags-$(CONFIG_MIPS_ATLAS) += -Iinclude/asm-mips/mach-mips
load-$(CONFIG_MIPS_ATLAS) += 0xffffffff80100000
+all-$(CONFIG_MIPS_ATLAS) := vmlinux.srec
#
# MIPS Malta board
core-$(CONFIG_MIPS_MALTA) += arch/mips/mips-boards/malta/
cflags-$(CONFIG_MIPS_MALTA) += -Iinclude/asm-mips/mach-mips
load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000
+all-$(CONFIG_MIPS_MALTA) := vmlinux.srec
#
# MIPS SEAD board
core-$(CONFIG_MIPS_SEAD) += arch/mips/mips-boards/sead/
cflags-$(CONFIG_MIPS_SEAD) += -Iinclude/asm-mips/mach-mips
load-$(CONFIG_MIPS_SEAD) += 0xffffffff80100000
+all-$(CONFIG_MIPS_SEAD) := vmlinux.srec
#
# MIPS SIM
#
core-$(CONFIG_MIPS_SIM) += arch/mips/mipssim/
-cflags-$(CONFIG_MIPS_SIM) += -Iinclude/asm-mips/mach-sim
+cflags-$(CONFIG_MIPS_SIM) += -Iinclude/asm-mips/mach-mipssim
load-$(CONFIG_MIPS_SIM) += 0x80100000
-#
-# Momentum Ocelot board
-#
-# The Ocelot setup.o must be linked early - it does the ioremap() for the
-# mips_io_port_base.
-#
-core-$(CONFIG_MOMENCO_OCELOT) += arch/mips/gt64120/common/ \
- arch/mips/gt64120/momenco_ocelot/
-cflags-$(CONFIG_MOMENCO_OCELOT) += -Iinclude/asm-mips/mach-ocelot
-load-$(CONFIG_MOMENCO_OCELOT) += 0xffffffff80100000
-
#
# PMC-Sierra MSP SOCs
#
core-$(CONFIG_QEMU) += arch/mips/qemu/
cflags-$(CONFIG_QEMU) += -Iinclude/asm-mips/mach-qemu
load-$(CONFIG_QEMU) += 0xffffffff80010000
-
-#
-# Momentum Ocelot-3
-#
-core-$(CONFIG_MOMENCO_OCELOT_3) += arch/mips/momentum/ocelot_3/
-cflags-$(CONFIG_MOMENCO_OCELOT_3) += -Iinclude/asm-mips/mach-ocelot3
-load-$(CONFIG_MOMENCO_OCELOT_3) += 0xffffffff80100000
+all-$(CONFIG_QEMU) := vmlinux.bin
#
# Basler eXcite
load-$(CONFIG_BASLER_EXCITE) += 0x80100000
#
-# NEC DDB
+# LASAT platforms
#
-core-$(CONFIG_DDB5XXX_COMMON) += arch/mips/ddb5xxx/common/
-
-#
-# NEC DDB Vrc-5477
-#
-core-$(CONFIG_DDB5477) += arch/mips/ddb5xxx/ddb5477/
-load-$(CONFIG_DDB5477) += 0xffffffff80100000
+core-$(CONFIG_LASAT) += arch/mips/lasat/
+cflags-$(CONFIG_LASAT) += -Iinclude/asm-mips/mach-lasat
+load-$(CONFIG_LASAT) += 0xffffffff80000000
#
# Common VR41xx
libs-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000
+#
+# Broadcom BCM47XX boards
+#
+core-$(CONFIG_BCM47XX) += arch/mips/bcm47xx/
+cflags-$(CONFIG_BCM47XX) += -Iinclude/asm-mips/mach-bcm47xx
+load-$(CONFIG_BCM47XX) := 0xffffffff80001000
+
#
# SNI RM
#
core-$(CONFIG_SNI_RM) += arch/mips/sni/
cflags-$(CONFIG_SNI_RM) += -Iinclude/asm-mips/mach-rm
load-$(CONFIG_SNI_RM) += 0xffffffff80600000
+all-$(CONFIG_SNI_RM) := vmlinux.ecoff
#
# Toshiba JMR-TX3927 board
JIFFIES = jiffies_64
endif
+#
+# Automatically detect the build format. By default we choose
+# the elf format according to the load address.
+# We can always force a build with a 64-bits symbol format by
+# passing 'KBUILD_SYM32=no' option to the make's command line.
+#
+ifdef CONFIG_64BIT
+ ifndef KBUILD_SYM32
+ ifeq ($(shell expr $(load-y) \< 0xffffffff80000000), 0)
+ KBUILD_SYM32 = y
+ endif
+ endif
+
+ ifeq ($(KBUILD_SYM32), y)
+ ifeq ($(call cc-option-yn,-msym32), y)
+ cflags-y += -msym32 -DKBUILD_64BIT_SYM32
+ endif
+ endif
+endif
+
AFLAGS += $(cflags-y)
CFLAGS += $(cflags-y) \
-D"VMLINUX_LOAD_ADDRESS=$(load-y)"
drivers-$(CONFIG_OPROFILE) += arch/mips/oprofile/
+ifdef CONFIG_LASAT
+rom.bin rom.sw: vmlinux
+ $(Q)$(MAKE) $(build)=arch/mips/lasat/image $@
+endif
+
#
# Some machines like the Indy need 32-bit ELF binaries for booting purposes.
# Other need ECOFF, so we build a 32-bit ELF binary for them which we then
makeboot =$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) $(1)
-ifdef CONFIG_BOOT_ELF32
-all: $(vmlinux-32)
-endif
-
-ifdef CONFIG_BOOT_ELF64
-all: $(vmlinux-64)
-endif
-
-ifdef CONFIG_MIPS_ATLAS
-all: vmlinux.srec
-endif
-
-ifdef CONFIG_MIPS_MALTA
-all: vmlinux.srec
-endif
-
-ifdef CONFIG_MIPS_SEAD
-all: vmlinux.srec
-endif
-
-ifdef CONFIG_QEMU
-all: vmlinux.bin
-endif
-
-ifdef CONFIG_SNI_RM
-all: vmlinux.ecoff
-endif
+all: $(all-y)
vmlinux.bin: $(vmlinux-32)
+@$(call makeboot,$@)
archclean:
@$(MAKE) $(clean)=arch/mips/boot
+ @$(MAKE) $(clean)=arch/mips/lasat
+
+define archhelp
+ echo ' vmlinux.ecoff - ECOFF boot image'
+ echo ' vmlinux.bin - Raw binary boot image'
+ echo ' vmlinux.srec - SREC boot image'
+ echo
+ echo ' These will be default as apropriate for a configured platform.'
+endef
CLEAN_FILES += vmlinux.32 \
vmlinux.64 \