config BASLER_EXCITE
bool "Basler eXcite smart camera"
select CEVT_R4K
+ select CSRC_R4K
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
config BCM47XX
bool "BCM47XX based boards"
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
select SYS_SUPPORTS_LITTLE_ENDIAN
select SSB
select SSB_DRIVER_MIPS
+ select SSB_DRIVER_EXTIF
+ select SSB_PCICORE_HOSTMODE if PCI
select GENERIC_GPIO
select SYS_HAS_EARLY_PRINTK
select CFE
config MIPS_COBALT
bool "Cobalt Server"
select CEVT_R4K
+ select CSRC_R4K
select CEVT_GT641XX
select DMA_NONCOHERENT
select HW_HAS_PCI
bool "DECstations"
select BOOT_ELF32
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select NO_IOPORT
select IRQ_CPU
select ARC32
select ARCH_MAY_HAVE_PC_FDC
select CEVT_R4K
+ select CSRC_R4K
select GENERIC_ISA_DMA
select IRQ_CPU
select I8253
config LASAT
bool "LASAT Networks platforms"
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select HW_HAS_PCI
bool "Lemote Fulong mini-PC"
select ARCH_SPARSEMEM_ENABLE
select CEVT_R4K
+ select CSRC_R4K
select SYS_HAS_CPU_LOONGSON2
select DMA_NONCOHERENT
select BOOT_ELF32
bool "MIPS Atlas board"
select BOOT_ELF32
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select IRQ_CPU
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
select IRQ_CPU
config MIPS_SEAD
bool "MIPS SEAD board"
select CEVT_R4K
+ select CSRC_R4K
select IRQ_CPU
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
config MIPS_SIM
bool 'MIPS simulator (MIPSsim)'
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select IRQ_CPU
config MARKEINS
bool "NEC EMMA2RH Mark-eins"
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
config MACH_VR41XX
bool "NEC VR4100 series based machines"
select CEVT_R4K
+ select CSRC_R4K
select SYS_HAS_CPU_VR41XX
select GENERIC_HARDIRQS_NO__DO_IRQ
config PMC_YOSEMITE
bool "PMC-Sierra Yosemite eval board"
select CEVT_R4K
+ select CSRC_R4K
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
config QEMU
bool "Qemu"
select CEVT_R4K
+ select CSRC_R4K
select DMA_COHERENT
select GENERIC_ISA_DMA
select HAVE_STD_PC_SERIAL_PORT
select PCSPEAKER
select SWAP_IO_SPACE
select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
- select ARCH_SPARSEMEM_ENABLE
select GENERIC_HARDIRQS_NO__DO_IRQ
select NR_CPUS_DEFAULT_1
select SYS_SUPPORTS_SMP
select ARC32
select BOOT_ELF32
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_EISA
select I8253
+ select I8259
select IP22_CPU_SCACHE
select IRQ_CPU
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select ARC32
select BOOT_ELF32
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_KGDB
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select ZONE_DMA32 if 64BIT
config SIBYTE_LITTLESUR
bool "Sibyte BCM91250C2-LittleSur"
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select ZONE_DMA32 if 64BIT
config SNI_RM
bool "SNI RM200/300/400"
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
select HW_HAS_EISA
config TOSHIBA_JMR3927
bool "Toshiba JMR-TX3927 board"
+ select CEVT_TXX9
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_TX3927
config TOSHIBA_RBTX4927
bool "Toshiba RBTX49[23]7 board"
select CEVT_R4K
+ select CSRC_R4K
+ select CEVT_TXX9
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
config TOSHIBA_RBTX4938
bool "Toshiba RBTX4938 board"
select CEVT_R4K
+ select CSRC_R4K
+ select CEVT_TXX9
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
config WR_PPMC
bool "Wind River PPMC board"
select CEVT_R4K
+ select CSRC_R4K
select IRQ_CPU
select BOOT_ELF32
select DMA_NONCOHERENT
bool
default n
+config ARCH_SUPPORTS_OPROFILE
+ bool
+ default y if !MIPS_MT_SMTC
+
config GENERIC_FIND_NEXT_BIT
bool
default y
config BOOT_RAW
bool
+config CEVT_BCM1480
+ bool
+
config CEVT_GT641XX
bool
config CEVT_R4K
bool
+config CEVT_SB1250
+ bool
+
+config CEVT_TXX9
+ bool
+
+config CSRC_BCM1480
+ bool
+
+config CSRC_R4K
+ bool
+
+config CSRC_SB1250
+ bool
+
config CFE
bool
menu "CPU selection"
-source "kernel/time/Kconfig"
-
choice
prompt "CPU type"
default CPU_R4X00
depends on SYS_SUPPORTS_MULTITHREADING
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
- select CPU_MIPSR2_SRS
select MIPS_MT
select NR_CPUS_DEFAULT_2
select SMP
select GENERIC_CLOCKEVENTS_BROADCAST
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
- select CPU_MIPSR2_SRS
select MIPS_MT
select NR_CPUS_DEFAULT_8
select SMP
depends on SYS_SUPPORTS_MULTITHREADING
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
- select CPU_MIPSR2_SRS
select MIPS_MT
help
Includes a loader for loading an elf relocatable object
config CPU_MIPSR2_IRQ_EI
bool
-#
-# Shadow registers are an R2 feature
-#
-config CPU_MIPSR2_SRS
- bool
-
config CPU_HAS_SYNC
bool
depends on !CPU_R3000
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
+
config ARCH_SPARSEMEM_ENABLE
bool
select SPARSEMEM_STATIC
performance should round up your number of processors to the next
power of two.
+source "kernel/time/Kconfig"
+
#
# Timer Interrupt Frequency Configuration
#
config PCSPEAKER
bool
+config ZONE_DMA32
+ bool
+
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
projects / linux-2.6 / blobdiff