select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_LITTLE_ENDIAN
+config BASLER_EXCITE
+ bool "Basler eXcite smart camera support"
+ select DMA_COHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select IRQ_CPU_RM7K
+ select IRQ_CPU_RM9K
+ select SERIAL_RM9000
+ select SYS_HAS_CPU_RM9000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ The eXcite is a smart camera platform manufactured by
+ Basler Vision Technologies AG
+
+config BASLER_EXCITE_PROTOTYPE
+ bool "Support for pre-release units"
+ depends on BASLER_EXCITE
+ default n
+ help
+ Pre-series (prototype) units are different from later ones in
+ some ways. Select this option if you have one of these. Please
+ note that a kernel built with this option selected will not be
+ able to run on normal units.
+
config MIPS_COBALT
bool "Cobalt Server"
select DMA_NONCOHERENT
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_128HZ
+ select SYS_SUPPORTS_256HZ
+ select SYS_SUPPORTS_1024HZ
help
This enables support for DEC's MIPS based workstations. For details
see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
select SYS_HAS_CPU_R4X00
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_100HZ
help
This a family of machines based on the MIPS R4030 chipset which was
used by several vendors to build RISC/os and Windows NT workstations.
simulate actual MIPS hardware platforms. More information on Qemu
can be found at http://www.linux-mips.org/wiki/Qemu.
+config MARKEINS
+ bool "Support for NEC EMMA2RH Mark-eins"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select SWAP_IO_SPACE
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_CPU_R5000
+ help
+ This enables support for the R5432-based NEC Mark-eins
+ boards with R5500 CPU.
+
config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)"
select ARC
config SWAP_IO_SPACE
bool
+config EMMA2RH
+ bool
+ depends on MARKEINS
+ default y
+
#
# Unfortunately not all GT64120 systems run the chip at the same clock.
# As the user for the clock rate and try to minimize the available options.
This is purely to save memory - each supported CPU adds
approximately eight kilobytes to the kernel image.
+#
+# Timer Interrupt Frequency Configuration
+#
+
+choice
+ prompt "Timer frequency"
+ default HZ_250
+ help
+ Allows the configuration of the timer frequency.
+
+ config HZ_48
+ bool "48 HZ" if SYS_SUPPORTS_48HZ
+
+ config HZ_100
+ bool "100 HZ" if SYS_SUPPORTS_100HZ || SYS_SUPPORTS_ARBIT_HZ
+
+ config HZ_128
+ bool "128 HZ" if SYS_SUPPORTS_128HZ || SYS_SUPPORTS_ARBIT_HZ
+
+ config HZ_250
+ bool "250 HZ" if SYS_SUPPORTS_250HZ || SYS_SUPPORTS_ARBIT_HZ
+
+ config HZ_256
+ bool "256 HZ" if SYS_SUPPORTS_256HZ || SYS_SUPPORTS_ARBIT_HZ
+
+ config HZ_1000
+ bool "1000 HZ" if SYS_SUPPORTS_1000HZ || SYS_SUPPORTS_ARBIT_HZ
+
+ config HZ_1024
+ bool "1024 HZ" if SYS_SUPPORTS_1024HZ || SYS_SUPPORTS_ARBIT_HZ
+
+endchoice
+
+config SYS_SUPPORTS_48HZ
+ bool
+
+config SYS_SUPPORTS_100HZ
+ bool
+
+config SYS_SUPPORTS_128HZ
+ bool
+
+config SYS_SUPPORTS_250HZ
+ bool
+
+config SYS_SUPPORTS_256HZ
+ bool
+
+config SYS_SUPPORTS_1000HZ
+ bool
+
+config SYS_SUPPORTS_1024HZ
+ bool
+
+config SYS_SUPPORTS_ARBIT_HZ
+ bool
+ default y if !SYS_SUPPORTS_48HZ && !SYS_SUPPORTS_100HZ && \
+ !SYS_SUPPORTS_128HZ && !SYS_SUPPORTS_250HZ && \
+ !SYS_SUPPORTS_256HZ && !SYS_SUPPORTS_1000HZ && \
+ !SYS_SUPPORTS_1024HZ
+
+config HZ
+ int
+ default 48 if HZ_48
+ default 100 if HZ_100
+ default 128 if HZ_128
+ default 250 if HZ_250
+ default 256 if HZ_256
+ default 1000 if HZ_1000
+ default 1024 if HZ_1024
+
source "kernel/Kconfig.preempt"
config RTC_DS1742